STATEMENT OF WORK 2.DOCX

STATEMENT OF WORK

USS LASSEN (DDG 82)/ USS KEARSARGE (LHD 3)

SHIPBOARD PIPING AND RELATED MATERIAL

1.0 OVERVIEW

A. This Statement of Work (SOW) defines the requirements for the supply and delivery of the Shipboard Piping and Related Material listed in paragraph 2.1 in support of the NAVSEA Shipboard Habitability Improvement Program.

2.0 GENERAL REQUIREMENTS

2.1 The Contractor shall supply and deliver the material listed below in which the contractor shall submit their pricing.

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H002 PIPE)

V21956-2090-0287

MARK FOR: LASSEN (DDG 82)

PROJECT: BCPO-S9606 / BENL-S9608 / BOFF-S1055 / BOFF-S9802

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H002 PIPE)

V21956-2090-0288

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H003 PIPE)

V21956-2090-0289

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H004 PIPE)

V21956-2090-0290

MARK FOR: LASSEN (DDG 82)

PROJECT: BCPO-S9606 / BENL-S9608 / BOFF-S1055 / BOFF-S9802

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H004 PIPE)

V21956-2090-0291

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H005 PIPE)

V21956-2090-0292

MARK FOR: LASSEN (DDG 82)

PROJECT: BCPO-S9606 / BENL-S9608 / BOFF-S1055 / BOFF-S9802

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H005 PIPE)

V21956-2090-0293

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H006 PIPE)

V21956-2090-0294

MARK FOR: LASSEN (DDG 82)

PROJECT: BCPO-S9606 / BENL-S9608 / BOFF-S1055 / BOFF-S9802

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H006 PIPE)

V21956-2090-0295

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H007 PIPE)

V21956-2090-0296

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H008 PIPE)

V21956-2090-0297

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

1/2" PIPE SIZE EXCEPT TO SUIT EXTENDED TAPER

MATERIAL: 316 STAINLESS

REPUBLIC BRASS SALES RBSLN316100, OR EQUAL

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. 0398F PIPE)

V21956-2090-0312

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

23" X 18-1/2" X 12"

MATERIAL: 14 GA STAINLESS

JUST MFG CO. MODEL A-18665 OR EQUAL

CERTIFIED TO ASME A112.19.3.

WITH 8" CTR-CTR FAUCET PUNCHINGS.

WITH ADJUSTABLE HEIGHT BRONZE TRAP, WITH 2" SB OUTLET, JAY R. SMITH MFG FIG. 9116-SS, OR EQUAL.

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. M004 PIPE)

V21956-2090-0313

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

1/2" FPT X 3/8" OD FEM CPRSN, 20" LG

MATERIAL: SST BRAID

(AND TO SUIT CONNECTION BETWEEN FN VOO4

AND MOEN MODEL 8432 FAUCET.)

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. M010H PIPE)

V21956-2090-0314

MARK FOR: LASSEN (DDG 82)

PROJECT: BCPO-S9606 / BENL-S9608 / BOFF-S1055 / BOFF-S9802

1/2" FPT X 3/8" OD FEM CPRSN, 20" LG

MATERIAL: SST BRAID

(AND TO SUIT CONNECTION BETWEEN FN VOO4

AND MOEN MODEL 8432 FAUCET.)

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. M010H PIPE)

V21956-2090-0315

MARK FOR: LASSEN (DDG 82)

PROJECT: HCPO-S9607 / HENL-S9609 / HOFF-S1056 / HOFF-S9803

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H002 PIPE)

V21700-2119-0423

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H003 PIPE)

V21700-2119-0424

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H004 PIPE)

V21700-2119-0425

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H005 PIPE)

V21700-2119-0426

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H006 PIPE)

V21700-2119-0427

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H007 PIPE)

V21700-2119-0428

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H008 PIPE)

V21700-2119-0429

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H009 PIPE)

V21700-2119-0430

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

DWG: 807-6737901-2 REV B

SPEC: ASTM A276

MATERIAL: TYPE 304L SST

EXCEPT DIMENSION C FOR FN H010 SHALL BE 4-7/16" INSTEAD OF 4-3/16".

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. H010 PIPE)

V21700-2119-0431

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

1/2" PIPE SIZE EXCEPT TO SUIT EXTENDED TAPER

MATERIAL: 316 STAINLESS

REPUBLIC BRASS SALES RBSLN316100, OR EQUAL

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. 0398F PIPE)

V21700-2119-0440

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

23" X 18-1/2" X 12"

MATERIAL: 14 GA STAINLESS

JUST MFG CO. MODEL A-18665 OR EQUAL

CERTIFIED TO ASME A112.19.3.

WITH 8" CTR-CTR FAUCET PUNCHINGS.

WITH ADJUSTABLE HEIGHT BRONZE TRAP, WITH 2" SB OUTLET, JAY R. SMITH MFG FIG. 9116-SS, OR EQUAL.

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. M004 PIPE)

V21700-2119-0441

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

1/2" FPT X 3/8" OD FEM CPRSN, 20" LG

MATERIAL: SST BRAID

(AND TO SUIT CONNECTION BETWEEN FN VOO4

AND MOEN MODEL 8432 FAUCET.)

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. M010H PIPE)

V21700-2119-0442

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

FOR USE WITH PART NO. SU-104-2 WC FILTER

SPEC: MIL-F-15919 TY II

POSSIBLE SOURCE AQW INC., TEL: 859-485-6263

PACKAGE AND MARK PER HSH NOTES DATED 11/28/2021. POSTED ON HTTPS://MSCORPHAB.COM

(FIND NO. F339C PIPE)

V21700-2121-P115

MARK FOR: KEARSARGE (LHD 3)

PROJECT: HENL-S9854 / HTRP-S1031 / HTRP-S1163 / HTRP-S1164 / HTRP-S9853

2.2 All material shall in accordance with paragraph 4.1 (Procurement Specification, HSH Notes dated 11/28/2021).

3.0 DELIVERY/ACCEPTANCE

Required Date of Delivery: 09/15/2022

Delivery shall be made to the following address:

DLA DISTRIBUTION NORFOLK, VA

ATTN: CODE N, HMSC HAB Program

1968 GILBERT STREET

BLDG. W148, DWY 12

PH: (757) 2478-8205

NORFOLK, VA 23511

Shipping terms shall be FOB ORIGIN (Shipping Point).

4.0 DESCRIPTIONS / SPECIFICATIONS

4.1 Procurement specification, HSH Notes dated 11/28/2021 provide both general and specific item information. Where there is a conflict between this SOW and HSH Notes, the SOW prevails

1. Introduction

The purpose of this Procurement Specification is to provide General Requirements, Deviation Control, Packaging and Marking Requirements and Technical Point of Contact for use in the procurement of Habitability material.

This procurement specification forms part of the requirements when invoked through the line item descriptions. For some categories, HSH Notes is invoked by reference in other HAB Procurement Specification Notes.

All items shall comply with these HSH Notes.

1. General Requirements

1. Drawings cited in line item descriptions are available through the HAB Program web site https://MSCorpHab.com.

1. Unless otherwise indicated, abbreviations are in accordance with ASME Y14.38 or https://MSCorpHab.com.

1. Many Military and Federal Specifications are being canceled and/or converted to commercial equivalents. Referenced drawings have not in all cases been updated to cite the currently applicable specification. Line item descriptions cite current specifications and take precedence over these Notes. If a referenced specification has been canceled without replacement and the line item description or Statement of Work do not cite an updated replacement specification, the Contractor may substitute a commercial equivalent. If there are option choices available within the cited specifications that are not specified by the contract, the Contractor shall select the grades and conditions etc. as the Contractor recommends.

1. Unless otherwise stated, the applicable revision of each reference shall be the one in effect on 11-28-2021. Applicability of revisions should be interpreted through the applicable database such as the Acquisition Streamlining and Standardization Information System (ASSIST) database for Government Specifications and Standards (https://quicksearch.dla.mil), and https://webstore.ansi.org/ for commercial documents.

1. Vendor shall forward a copy of all orders, modifications, and changes to baldev.s.gill.ctr@us.navy.mil and Richard.b.minzer.ctr@us.navy.mil upon receipt.

1. Request for Deviation (RFD) or Engineering Change Proposal (ECP)

All items shall be made strictly in accordance with the invoked line item description and Statement of Work except where a Request for Deviation (RFD) or Engineering Change Proposal (ECP) has been approved explicitly for these requirements. Some references such as Type Drawings permit deviations and/or further development beyond the level of detail on Type Drawings. However, any deviation requires documentation and submittal for approval.

2. RFDs and ECPs must be precisely defined. The government may require detailed sketches, drawings, data or samples to clarify and document any requests. Due to the Habitability nature of the items, appearance is a factor in the evaluation of all RFDs and ECPs. Submittals shall include contract number, applicable CLIN and Find Number, description of the differences, reason for the differences, cost impact, schedule impact, identification of units which are affected, any effect on logistics support, action taken to prevent future recurrence of any non-conformance, reference to all previous correspondence that is related to the RFD or ECP or similar requests, and the contractor's point-of contact including phone number, fax number, and e-mail address. Submittals shall be in the contractor's format. The submission of requests via electronic means (e.g., e-mail) is preferred.

2. Reference to a manufacturer's model number or item number is intended to be descriptive and not restrictive. The referenced items represent the required sizes, configuration, materials, finish, quality, and workmanship. Alternate proposals for items that are believed equal or a better value to the government are required to be submitted requesting approval.

2. For any item, vendors may propose equivalent commercial items. For each alternate or substitute item, the vendor's proposal shall include a detailed description and catalog cuts, including renderings or photographs. Additional detail, drawings, or even a sample, may be required to obtain approval if the catalog and description does not adequately describe the item.

2. Any level of bulk packaging larger than the Unit of Issue cited in the item description would be a deviation which must be approved.

2. Approval of all Drawings, Substitutes, Deviations, RFDs, or ECPs shall be by the requiring activity Mid-Atlantic Maintenance Center (MARMC) Code 352. Requests shall be e-mailed to MARMC (william.f.foley12.civ@us.navy.mil) by the vendor with copy to any PCO or ACO.

2. The MARMC Program Manager will forward the Government response to the vendor, via the PCO/ACO, not later than thirty (30) days after receipt. Time will not be added to the vendor's production schedule because of failure to identify and submit requested deviations, waivers, drawings, or requests for clarification.

1. Preservation, Packaging and Marking

3. Preservation, packaging, packing and marking shall be in accordance with ASTM D3951-2018 "Standard Practice for Commercial Packaging," and as additionally noted herein.

A. Packaging and packing shall additionally be sufficient to afford adequate protection against deterioration and physical damaging (including marring or abrasion to finished surfaces) during shipment and handling. The vendor is responsible to correct any damage or loss. Paragraph 4.2 of ASTM D3951 does not apply; the stronger wording of paragraph 4.1 is not superseded by the subparagraphs of 4.2. If it arrives damaged, it was inadequately packaged. However, for cases where government shipping applies, the vendor is not responsible for damage if sturdy shipping containers have been clearly abused and damaged. Each Find Number shall be packed, packaged and marked, such that when an outer or intermediate container is opened, it is still protected and can be staged, handled and redistributed by Find Number without additional repackaging or marking.

B. Each shipment larger than 70 pounds or 12 cubic feet shall be palletized for handling with a fork lift.

C. The use of asbestos, excelsior, loose fill of any type (peanuts or shredded material), newspaper or shredded paper of all types (including waxed paper, computer paper and similar hygroscopic or non-neutral material) is prohibited.

D. Material under these HSH NOTES will be shipped to the Department of Defense, and compliance such as with ISPM Publication No.15 for wood is required.

E. ASTM D3951 Options for Export Shipments shall apply if and only if the order or contract calls out such as “Package for Export.”

F. The contractor shall provide a packing list identifying the contents of each shipment with the shipment. DD Form 250 "Material Inspection and Receiving Report" may be used as the packing list provided that it contains all of the information required below and that it applies to the specific shipment.

3. Marking

1. Marking shall be in accordance with ASTM D3951 and as additionally noted herein.

1. In addition to labels and marking required elsewhere, each Unit Package, Intermediate Package, Exterior Container and Packing Slip shall be marked with: Requisition Number (REQN), Find Number including Discipline, Quantity, Unit of Issue, Contract and any Delivery Order, Ship name and hull number and HAB Project Number or HAB Project Type as indicated in the line item description.

1. Outer containers larger than 70 pounds or 10 cubic feet shall be marked with the information in the upper left hand corner of two adjoining sides, which are a side and an end as a table such as in the sample below.

1. Bar coding may be omitted from this order

1. Labels shall be similar to the samples below:

1. Unit Package, Intermediate and Exterior Container which includes a single requisition:

REQN: N50054-1224-1234

FIND NO: 0602 ARR

QTY UI: 2 EA

CONTRACT: N00189-05-D-1234 DO 0036

USS NEVERSAIL (LPD 4) HAB Project: BENL-S3078

1. Intermediate and Exterior Containers with more than one Requisition:

USS NEVERSAIL (LPD 4)

Contract N0018919D1234 DO N5005422F6789

1. Technical Point of Contact

4. The Technical Point of Contact (TPOC) for this solicitation, contract or order is:

Bill Foley Mid Atlantic Regional Maintenance Center (MARMC) Code 352 Bldg. LF-18, 9727 Avoinics Loop Norfolk, Virginia 23511 Phone: (757) 396-1882 or (757) 778-1725 william.f.foley12.civ@us.navy.mil

4. The TPOC will act as the Contracting Officer's Technical Representative for technical matters. The TPOC will provide technical direction and discussion as necessary with respect to the specification or statement of work, as well as monitoring the progress and quality of contractor performance. The TPOC is not an Administrative Contracting Officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the statement of work in the contract.

4. When, in the opinion of the contractor the TPOC requests anything outside the existing scope of the contract, the contractor shall promptly notify the contracting officer in writing. No action shall be taken by the contractor under such direction until the contracting office has issued a modification to the contract or until the issue has otherwise been resolved.

End of HSH Notes: Above is HSH Notes Dated 11-28-21

5.0 EVALUATION CRITERIA

The basis for award is Low Price Technically Acceptable.