Statement of Work 0167-9399 and 0167-9350 and 0167-9351.docx

Statement of Work JML: 0167-9399, 9350 and 9351 66OE316001-SMI, JML Item #’s 001 thru 003 Ship/Activity: OED CALYPSO MATERIAL FOR CME ENVIRONMENTAL SENSING DWG Place of Performance: Contractor’s Facility Period of Performance: 30JUN2020 to 30SEP2020

1. GENERAL: Puget Sound Naval Shipyard and Intermediate Maintenance Facility (PSNS&IMF) Ocean Engineering Division (OED), in support of the Payload Handling System, requires the Non-Recurring Engineering (NRE) manufacture and customization update by Original Equipment Manufacturer (OEM) of the NTM1 and NTM5 Panel Meters. These requirements include manufacturing and ruggedizing custom scale plates for panel meters one (1) each FN 7 P/N: NTM5-5094-203-0099, two (2) each FN 8 P/N: NTM1-1092-203-2099 and one (1) each FN 9 P/N: NTM1-1092-203-0099 of DWG 8681560 REV A.

1.1 Introduction. The Contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and other items and non-personal services necessary to perform engineering and fabrication services to ruggedize and deliver the scale plate for the above mentioned part numbers within the confines of specifications as defined in this Statement of Work except for those items specified as Government furnished property and services.

1.2 Background. To make the Panel Meters more suitable for shipboard use, OEM has updated P/Ns NTM5-5094-203-0099, NTM1-1092-203-2099 and NTM1-1092-203-0099 to include the following changes to ruggedize them:

1.2.1 Updated Front Bezel in order to support mounting NTM1 and NTM5 units with QTY four (4) #8 fasteners in accordance with Reference A of this Statement of Work.

1.2.2 Updated Back Plates to add #6 screws down terminals for external airing connections in accordance with Reference A of this Statement of Work.

1.2.3 Developed a unique scale plate in order to customized the Panel Meters to existing application for each part numbers in accordance with Reference A of this Statement of Work

2. SCOPE OF WORK. Manufacture and customize of the one (1) each NTM5 P/N: NTM5-5094-203-0099, two (2) each NTM1 P/N: NTM1-1092-203-2099, one (1) each NTM1 P/N: NTM1-1092-203-0099 and update the Front Bezel and Back Plates to be more ruggedize. The changes will not effect in any way functionality or compliance to standards of the currently existing equipment.

3. APPLICABLE REFERENCE.

A. DWG 8681560 REV A

4. PRE-DELIVERABLE.

4.1 A Design Sketch in accordance with Reference A shall be provided prior to Surveillance Officer for approval prior to manufacture. The Design Sketch shall include: 1) QTY one (1) each front panel scale and bar graph for NTM5 P/N: NTM-5094-203-0099 FN 7 of DWG 8681560 REV A, 2) QTY two (2) each front panel scale and bar graph for NTM1 P/N: NTM-1092-203-0099 FN 8 of DWG 8681560 REV A, 3) QTY one (1) each front panel scale and bar graph for NTM1 P/N: NTM-1092-203-2099 FN 9 of DWG 8681560 REV A.

5. DELIVERABLES.

5.1 Manufacture one (1) each NTM5 P/N: NTM-5094-203-0099 FN 7 of DWG 8681560 REV A. The front panel scale and bar graph for the NTM5 Panel Meter will need to be based off Figure 3 of this Statement of Work. The Government shall approve the front panel scale plate design prior to manufacture.

5.1.1 Ruggedize one (1) each Front Panel of NTM5 P/N: NTM-5094-203-0099 FN 7 of DWG 8681560 REV A in accordance with Figure 2 of this Statement of Work. The inner green rectangle represents the dimensions currently used for the NTM-5 body and will not change.

5.1.2 Update one (1) each NTM5 P/N: NTM-5094-203-0099 FN 7 of DWG 8681560 REV A with NRE Back Plate Labeling and add #6 screws down terminal to the Back Plate in accordance with Table 1 of this Statement of Work.

5.2 Manufacture two (2) each NTM1 Panel Meter P/N: NTM-1092-203-2099 FN 8 of DWG 8681560 REV A. The front panel scale and bar graph for this NTM1 Panel Meter will need to be based off Figure 4 of this Statement of Work. The Government shall approve the front panel scale plate design prior to manufacture.

5.2.1 Ruggedize two (2) each Front Panel of NTM1 P/N: NTM-1092-203-2099 FN 8 of DWG 8681560 REV A in accordance with Figure 1 of this Statement of Work. The inner green rectangle represents the dimensions currently used for the NTM-1 body and will not change.

5.2.2 Update two (2) each NTM1 P/N: NTM-1092-203-2099 FN 8 of DWG 8681560 REV A with NRE Back Plate Labeling and add #6 screws down terminal of each Back Plate in accordance with Table 2 of this Statement of Work.

5.3 Manufacture one (1) each NTM1 Panel Meter P/N: NTM-1092-203-0099 FN 9 of DWG 8681560 REV A. The front panel scale and bar graph for this NTM1 Panel Meter will need to be based off Figure 5 of this Statement of Work. The Government shall approve the front panel scale plate design prior to manufacture.

5.3.1 Update one (1) each NTM1 P/N: NTM-1092-203-0099 FN 9 of DWG 8681560 REV A with NRE Back Plate Labeling and add #6 screws down terminal of the Back Plate in accordance with Table 3 of this Statement of Work.

6. CONTRACTOR FURNISHED MATERIAL. Contractor is to furnish all material and labor as well as any HAZMAT and tooling necessary to complete these Panel Meters described above.

7. QUALITY ASSURANCE REQUIREMENTS: The following Certification records shall be supplied to PSNS & IMF for approval and certification review. Certification/Data Report documentation shall be attached in the Wide Area Workflow (WAWF) e-Business Suite. Upon submission in WAWF send email notifications to: PSNS.WAWFQACertification.FCM@navy.mil.

7.1 Clause C501 Certificate of Compliance (COC) per CDRL DI-MISC-81356A stating one (1) each NTM5 Panel Meter P/N: NTM-5094-203-0099, two (2) each NTM1 Panel Meter P/N: NTM-1092-203-2099 and one (1) each NTM1 Panel Meter P/N: NTM-1092-203-0099 have been manufactured in accordance with Reference A above. The COC shall also contain as a minimum: A) The contractor’s name, address, phone number and date. B) The issuing agencies purchase order number. C) Item nomenclature of each purchased item. D) A statement certifying that all items furnished on the contract are in full compliance with all specification and contract requirements. E) Authorized personnel’s signature. F) Authorized personnel’s printed name and title.

7.2 Design Data and Calculation (Pre-Deliverable) CDRL DI-GDRQ-80650 in accordance with Reference A for the delivery of Front Panel Design Plates for one (1) each NTM5 Panel Meter P/N: NTM-5094-203-0099 FN 7 of DWG 8681560 REV A, two (2) each NTM1 Panel Meter P/N: NTM-1092-203-2099 FN 8 of DWG 8681560 REV A and one (1) each NTM1 Panel Meter P/N: NTM-1092-203-0099 FN 9 of DWG 8681560 REV A.

8. SECURITY REQUIREMENTS: All references and deliverable items associated with this task are unclassified. There are no other known requirements for access to restricted areas or information connected with the performance of this task. Access to PSNS is not required for this work.

9. CONTRACTOR TRAVEL REQUIREMENTS: There are no known travel requirements.

10. SHIPPING ADDRESS: Shipping address of acquisition materials for direct delivery to DOD installation shall be to the following location:

Puget Sound Naval Shipyard Receiving Officer, Building 514 1400 Farragut Ave Bldg. 514 Bremerton WA 98314

11. GOVERNMENT SURVEILLANCE OFFICER: Any items concerning contractual requirements or funding must be addressed to the Contracting Officer as well as the Surveillance Officer.

NTM1 Front Bezel Update Details: NTM1 panel meter in accordance with Figure 1 below. The inner green rectangle represents the dimensions currently used for the NTM1 body and will not change. All dimensions are given in inches and should be +/- .001 accuracy.

Figure 1: NTM1 Panel Meter Updated

Ruggedized Front Panel NTM-5: NTM-5 panel meter in accordance with Figure 2 below. The inner green rectangle represents the dimensions currently used for the NTM-5 body and will not change. All dimensions are given in inches and should be +/- .001 accuracy.

Figure 2: NTM5 Panel Meter Update

NTM5 P/N: NTM-5094-203-0099 FN 7 of DWG 8681560: The front panel scale and bar graph for the NTM5 Panel Meter will need to be based off Figure 3. The Government shall approve the front panel scale plate design when available.

Figure 3

NTM1 P/N: NTM-1092-203-2099 FN 8 of DWG 8681560: The front panel scale and bar graph for the NTM1 panel meter will need to be based off of Figure 4. The Government shall approve the front panel scale plate design when available.

Figure 4

NTM1 P/N: NTM-1092-203-0099 FN 9 of DWG 8681560: The front panel scale and bar graph for the NTM1 panel meter will need to be based off of Figure 5. The Government shall approve the front panel scale plate design when available.

Figure 5

Back Panel Updates: Add #6 screw down terminals to the back plate of the NTM1 and NTM5 panel Meters and provide labels (functions are provided for reference only and do not need to be included in the label) for them in accordance with Tables 1, 2 and 3 below of this Statement of Work.

NTM5 P/N: NTM-5094-203-0099, FN 7 of DWG 8681560, Back Plate Labeling

Table 1

NTM1 P/N: NTM-1092-203-2099, FN 8 of DWG 8681560, Back Plate Labeling

Table 2

NTM1 P/N: NTM-1092-203-0099, FN 9 of DWG 8681560, Back Plate Labeling

Table 3 image2.png image3.png image4.png image5.png image1.png