Statement of Objectives_Redacted.pdf

1. SOO/TRP for COTS Products Purchases To: AFTC/PZIOA, Eglin AFB, FL For: USAF/AFRL, RWMO Testing

2. Purpose

RP-2 Exploding Bridgewire (EBW) detonators are used for testing at the Advanced Warhead Experimentation Facility. RISI EBW’s are used extensively during static detonations tests.

3. Technical Requirements Teledyne is the only US manufacture of EBW detonators that are approved for use on Eglin AFB. All explosive safety documentation for use on Eglin AFB is approved and the use/purchase of these detonators is approved in the Air Force Global Ammunition Control Point and 96 TW Safety to include the COTS (Commercial Off The Shelf) package (COTS20110010), TDP (Technical Data Package), IHC (Interium Hazard Classification).Teledyne The Commercial Off The Shelf package is approved for RP-2 EBW, COTS20110010.

The detonator must have the following Firing Parameters:

Threshold Burst Current: 220 amps

Threshold Voltage: Approx. 500 volts

Threshold Voltage Std. Deviation 10 volts maximum

Function Time: 1.65 usec. typical

Standard Time Simultaneity Standard Deviation: 0.035 usec Max

3.1 Special Asset Tagging

The contractor shall provide special asset tags IAW MIL STD-130, DODI 8320.04, Item Unique Identification (IUID) Standards for Tangible Personal Property and DFARS 252.211-7703, Item Identification and Valuation. The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

3.2 IPV6 Mandate

The contractor shall ensure the product meets IPV6 capabilities per UCR 2013 and certified by the DoD UC approved products list.

3.3 FIPS 140-2 Encryption Mandate

The contractor shall ensure that all cryptographic products have FIPS 140-1 or 140-2 security certification through the FIPS 140-1 and 140-2 approved products list.

12.28.2022

3.4 Common Criteria Evaluation & Validation Scheme

The contractor shall ensure that products used to protect information on National Security Systems are certified by the NIAP/CCEVS approved product list.

3.5 TEMPEST Program Mandates

The contractor shall provide TEMPEST products certified by the NSA TEMPEST approved products list.

4. Ordering Table

INSERT YOUR TABLE OF REQUIRED EQUIPMENT HERE

LINE ITEM RP-2 EBW Detonator QTY 150 DESCRIPTION P/N 167-4379

5. Technical Contractual Requirements

5.1 Technical Refresh

In order to ensure new design enhancements and technological updates or advances, the contractor shall offer, under this DO, hardware and software components available to the contractor's commercial customers. Furthermore, the contractor shall make available any commercially available updates to the hardware and software provided under this DO. If such updates are available to other customers without charge, then they shall also be made available to the Government without additional charge. The contractor will ship these updates to existing customers who have acquired the hardware/software being updated under this DO. Vendor commercial product offerings shall include “state of the art” technology, i.e., the most current proven level of development available in each product category.

5.2 Trade Agreement Act (TAA)

All proposed products must be compliant with the Trade Agreements Act of 1979 (TAA) and related clauses in Section I of this contract. In accordance with DFARS 252.225-7021, the Trade Agreements Certificate at DFARS 252.225-7020 shall be provided for each end item defined and specified in a solicitation that exceeds the TAA threshold subject to the waivers and exceptions provided in FAR 25.4, and DFARS 225.4 offered in response to any RFQ issued under this contract. Please note that Federal Acquisition Regulation (FAR) paragraph 25.103(e) includes an exemption from the Buy American Act (BAA) for acquisition of information technology that is commercial items.

5.3 Authorized Resellers

The contractor may be an authorized reseller of new and refurbished/remanufactured equipment for OEMs proposed under this DO. The contractor may also procure directly from the OEM or utilize other legitimate distribution channels to provide the required products in accordance with the OEM’s policies on reselling. Any contractor’s channel relationships with their OEM partners (gold, silver, etc.) will be represented in the best pricing offered. If the contractor is not an OEM reseller, the contractor shall clearly identify this on the submitted proposal and list the OEM resell partner’s registered relationship with the OEM. DOs may restrict the use of authorized resellers, specific OEMs, or identify required OEMs. The contractor shall ensure all products are genuine and eligible for any OEM warranties, maintenance agreements and licensing as offered. Genuine products are those products the OEM, by their policy, considers not “secondary”, destroyed, stolen or scrapped.

5.4 Remanufactured/Refurbished Products

Remanufactured/Refurbished products are not allowed for this application.

5.5 Items on Backorder

In their response to a Request for Quote (RFQ), the contractor shall provide notification, if applicable, that a particular item is on backorder, the expected lead-time to fulfill the order, etc.

It shall be implicit that a response to an RFQ with no items identified on backorder is a declaration that the items are available at the time of quote submission.

5.6 Warranty

The contractor shall provide any OEM pass through warranty and standard commercial warranties applicable to the products being purchased at no cost. This shall apply to new, refurbished and remanufactured equipment.

6. Delivery Requirements 16 weeks ARO

6.1 Timeframes

See Request for Quote for delivery dates.

6.2 Shipping Information

All products shall be shipped to:

2605 Perimeter Rd Suite 112 Building 1226 Eglin AFB FL 32542 (DODAAC FV2823)

Inspection/Acceptance: The following Government officials are responsible for receiving the products and performing inspection: