SS 3053100_1001_Redacted.pdf

JUSTIFICATION FOR SOLE SOURCE ($5k-$250k) Ref: FAR 13.106(b)

The service or material listed on (Document number)_30531000 & 30531001_ is sole source and competition must be restricted to one source, or to only one brand name for reasons indicated below. There are no substitutes available for this material.

Restricted to the following source or brand name. Provide original manufacturer's name.

(If a sole source manufacturer distributes via dealers, ALSO provide dealer information.)

Manufacturer: _Teledyne Marine___________________________________________ Manufacturer POC & Phone Nr._Tara Reischl, (603)760-5611_________________ Mfr. Address_162 Corporate Drive Suite 100, Portsmouth, NH 03801_________ Manufacturers Dealer/Rep_SAME____________________________________________ Dealer/Rep Address/Phone Number_SAME_____________________________________

_X_Description of the item or service required, the estimated cost, and required delivery date.

4 EACH, IN-LINE CONNECTOR RECEPTACLE ASSEMBLY 41#20 PIN PATTERN 120 KEYING, P/N 1280171- 101, TOTAL COST: ________________________________________________________________

_X_Specific characteristics of the material or service that limit the availability to a sole source or particular brand name (unique features, function of the item, etc.).

Describe in detail why only this suggested source can furnish the requirements to the exclusion of other sources.

Teledyne Marine is the OEM for these In-Line Connector Assemblies. These In-Line Connector Assemblies were designed and constructed by Teledyne Marine as stated in associated vendor drawings. Teledyne Marine has all of the available equipment, parts, and drawings required to construct this within the time frame required. Part numbers given in related drawings correlate to Teledyne Marine parts and do not cross to outside vendors.

_X_The requested material or service represents the minimum requirements of the Government.

CHECK & FILL IN ALL APPLICABLE BLANKS BELOW

_X_The material/service must be compatible in all aspects (form, fit and function) with existing systems presently installed. Justi Describe the equipment you have now and how the new item/service must coordinate, connect, or interface with the existing system.

Teledyne Marine is the OEM for these In-Line Connector Assemblies. As the OEM they designed and manufactured the previous assemblies. The In-Line Connector Assemblies will fit into the original location with no installation problems and will allow existing equipment connectivity.

_X_A patent, copyright, or proprietary data limits competition. The proprietary data is:

Part numbers given in assembly drawings are Teledyne Marine part numbers and cannot be crossed to other vendors.

for existing brand name equipment.

____Other information to support a sole-source buy:

I CERTIFY THAT STATEMENTS CHECKED, AND INFORMATION PROVIDED ABOVE, ARE COMPLETE AND CORRECT TO THE BEST OF MY KNOWLEDGE AND DO NOT CONTAIN CLASSIFIED INFORMATION. I UNDERSTAND THAT THE PROCESSING OF THIS SOLE-SOURCE JUSTIFICATION PRECLUDES THE USE OF FULL AND OPEN

COMPETITION.

Contracting Officer Signature Date _________________

DLA Maritime Puget Sound Justification for Sole Source 05/21/2018