2579468_CDRL1_REPORT_EDA.PDF

ITEM UNIQUE IDENTIFICATION (IUID) CHECKLIST

I. IUID DETAILS: DFARS 252.211.7003

SECTION (c) (1) (ii) APPLIES TO THE FOLLOWING:

ITEM REQUIRING IUID MARKING

NSN

2840011911809PR

VERSION NUMBER

NOUN

RING,MOUNT

INITIATOR

Renegar, Andrew S

ORGANIZATION CODE / OFFICE SYMBOL

AFLCMC / LPSEBB

COMMERCIAL PHONE

405-736-2008

DSN PHONE

336-2008

CAGE / REFERENCE NUMBER

MARKING IS TO BE PERFORMED IN ACCORDANCE WITH THE LATEST VERSION OF MIL-STD-130

MARKING GUIDANCE

Recommended Marking Instruction

ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE

Bag/Tag

MARKING METHOD

BAG/TAG

DESCRIPTION / LOCATION

BAG/TAG

REMARKS

ATTACHMENT(S)

II. EMBEDDED ITEMS

SECTION (c) (1) (iii) APPLIES TO THE FOLLOWING:

NSN NOUN

CAGE / REFERENCE NUMBER

ITEM IS AN EMBEDDED ITEM FOR NSN / PSEUDO NSN: 2840011911809PR

MARKING GUIDANCE ENGINEERING DRAWING / ECP / ECO NUMBER

MARKING TYPE MARKING METHOD

DESCRIPTION / LOCATION

ATTACHMENT(S)

Page 1 of 1IUID Version 1Generated by PRPS using Jasper Reports on 15 Oct 2018

TECHNICAL DATA PACKAGE - ENGINEERING NOTES (ENs)

OF 4 PAGES

NATIONAL STOCK NUMBER PART NUMBER

2840-01-191-1809PR 9530M56G13 20 FEB 2015

X WHEN CHECKED BELOW OR LISTED IN THESE NOTES, DEFINITIONS APPLICABLE TO

THIS PRODUCT ARE OR HAVE:

(A) ENGINEERING CRITICAL IN APPLICATION: An item which requires special manufacturing process, controls, and testing of material or end items.

Because of its use or application, failure to maintain the highest reliability of such an item could be catastrophic resulting in loss of life or serious injury, loss of a weapon system or extensive secondary damage, with direct impact on the capability to respond to a national emergency or to achieve wartime sustainability.

(B) COMPLEX: Items having quality characteristics not wholly visible (hidden characteristics), in the end product for which contractual conformance must be established progressively through precise measure-ments, tests or controls applied during purchasing, manufacturing, performance, assembly and functional operation either as an individual item or in conjunction with other items [FAR SUBPART 46.203(b)].

(c) COMMERCIAL: Described in commercial catalogs, drawings or industrial standards [FAR SUBPART 46.203(a),(1)].

(D) CRITICAL CHARACTERISTICS: Characteristics which, when defective, are likely to result in hazardous or unsafe conditions for individuals using, maintaining or depending upon the product; or, are likely to prevent per-formance of the tactical function of a major end item such as an aircraft, missile, space vehicle, engine or a major part thereof. (Derived from

MIL-STD-1916).

(E) MAJOR CHARACTERISTICS: Characteristics (other than critical or minor), which, when defective, are likely to result in failure or to reduce the usability of the product or a major end item for its intended purpose.

(Derived from MIL-STD-1916).

(F) MINOR CHARACTERISTICS: All characteristics not designated as critical or major but for which full conformity is required.

THIS PRODUCT HAS BEEN DETERMINED TO BE OR CONTAINS (AS CHECKED BELOW):

X Engineering critical in application.

Critical characteristics.

X Major characteristics.

X Minor characteristics, all excepting critical and major.

Complex.

Available as a commercial product.

AFLC FORM 2559 (COMPUTER GENERATED) PREVIOUS EDITION WILL BE USED

_X_ When materials, processes or components are to be obtained from directed sources as indicated herein or in the specifications, alternate sources may only be utilize upon prior approval by the contracting officer of this procuring activity as a deviation.

_X_ Bidders are requested to notify the contracting officer in writing as soon as is practicable of any drawing, specification, standard or other required technical data which is of more current date/revision than that shown on the Engineering Data List.

_X_ Contractor is authorized to the extent specified herein to use standards, specifications, and other required technical data which are of a more current date/revision than those shown on the Engineering Data List. Proposed changes to revision-in-use other than those allowed by this paragraph must be submitted in writing to the contracting officer for approval by the cognizant engineering authority.

a. VENDOR DRAWINGS, VENDOR MASTER DRAWINGS (MYLARS), AIRFOIL DATA, CONTOUR DATA, AND PERFORMANCE DATA: (e.g. 1234m56, 658972, AD658972, IC658972, IF-658972) Revisions specified on the ENGINEERING DATA LIST are the revisions to be used for manufacturing. Requests to use later revisions must be submitted for approval in writing to the contracting officer, along with the newer revision document, for approval by the cognizant engineering authority.

b. VENDOR SPECIFICATIONS, VENDOR STANDARDS, INSPECTION PHOTOGRAPHS: (e.g. P1TF3, PWA360, EPS14500) The revisions specified on the Engineering Data List form a baseline minimum revision status, and are the most recent revisions the government can provide. No revision before that shown in the Engineering Data List will be used. Revisions later than those specified in the Engineering Data List may be used provided:

1. The contractor notifies the contracting officer in writing of the revision to be used, and

2. The new revision does not and will not affect form, fit, or function of the part, process, or material being manufactured and/or supplied, and

3. Use of the new revision will not increase the cost to the government of compensation for the product being supplied, and

4. The Engineering Notes do not contain a clause specifically excluding the allowances of this paragraph.

c. INDUSTRY SPECIFICATIONS/STANDARDS, MILITARY

SPECIFICATIONS/STANDARDS, QUALIFIED PRODUCT LIST (QPL):

(e.g. AMS 5613, ANSI Y14.5, MIL-STD-130, QPL 25135) The revision to be used will be the revision in effect on the dates of opening of solicitation. Later revisions of these documents are approved for use provided:

1. The new revision does not and will not affect form, fit, or function of the part, processes, or material being manufactured and/or supplied and

2. Use of the new revision will not increase the cost to the government of compensation for the product being supplied.

_X_ Lower tier specifications listed in or referenced by first tier specifi-cations may not be shown on the data lists or engineering notes accom-panying this contract but are nonetheless required by this contract for compliance. Exceptions would occur only when such lower tier requirements have been specifically waived or substitute specifications/requirements are designated herein.

_X_ Reports, process sheets, inspection methods sheets and all other documents required by specifications imposed by this contract for contractor compli-ance which were previously required to be submitted to a prime design con-tractor shall be held at that facility for review by government personnel.

_X_ When prime design source specifications require or provide for participa-tion by that prime source quality, manufacturing, laboratory or engineering support services, these requirements or provisions do not apply when the contract was issued by this procuring activity. For these services or direction pertaining thereto, contact the cognizant government contract administration office or this procuring activity for assistance.

_X_ The contractor is responsible for assuring that all dimensions, conditions, tests and test results identified in these engineering notes, applicable drawings, specifications and contract quality requirements are met by themselves and their suppliers. This requirement applies to all character-istics whether those characteristics have been specifically designed as being critical, major or are those minor characteristics not specifically designated as such.

_X_ Prior to beginning of manufacture, the contractor will notify the engineering office of this procuring activity of all manufacturing processes and processing procedures intended for use in production of this product. Once these processes are established, no changes shall be made without prior approval of the engineering office of this procuring activity.

__ Serialization of each part/assembly (contract end item)is required.

NATIONAL STOCK NUMBER PART NUMBER DATE

2840-01-191-1809PR 9530M56G13 20 FEB 2015

GENERAL NOTES

1. PARTS SHALL BE IDENTIFED PER MIL-STD-130 USING THE METHODS SPECIFIED BY

GE SPEC P23TF3 AND THE APPLICABLE DRAWING(S).

2. THIS PART CONTAINS TITANIUM MATERIAL WHICH IS DIFFICULT TO MACHINE.

ONLY THOSE FAMILIAR WITH THE PRODUCTION PRACTICES OF TITANIUM MATERIAL

SHOULD BE CONSIDERED AS APPROVED SOURCES.

3. DRAWING J970 IS A SOURCE CONTROL DRAWING. PROCURE FROM THE

SOURCE(S) IDENTIFIED ON THE DRAWING.

4. THIS SYMBOL Ө DENOTES MAJOR CHARACTERISTICS.

5. USE P23TF3 IN LIEU OF P23TF2.

CONTROLLED PROCESSES

A. MATERIAL

B. FPI

C. RADIOGRAPHIC INSP

D. WELDING

E. CLEANING OF TITANIUM

F. METALLOGRAPHIC INSPECTION

AFLC FORM 2559 (COMPUTER GENERATED) PREVIOUS EDITION WILL BE USED

TRANSPORTATION DATA FOR SOLICITATIONS

COMMODITY: See Continuation

PURCHASE INSTRUMENT NUMBER:

FD20301900113-00

DATE INITIATED:

13 AUG 2018

STOCK NUMBER: See Continuation

X ORIGIN DESTINATION OTHER X DATA / FIRST ARTICLE F.O.B. DESTINATION(Specify)

F.O.B. TERMS RECOMMENDED AS BEST SUITED FOR THIS PROCUREMENT

TRANSPORTATION PROVISIONS / CLAUSES FAR CITATION

F.O.B. Origin 52.247-29 F.O.B. Destination 52.247-34 Freight Classification Description 52.247-53 Contact DCMA Transportation Contact DCMA Transportation on ALL "DCMA Administered" contracts prior to shipment for shipping instructions using the DCMA Shipment Instruction Request (SIR) eTool System, at http://www.dcma.mil <http://www.dcma.mil/> for ALL FOB:

Origin, Foreign Military Sales (FMS), and FOB: Destination OCONUS/Export movements to obtain the appropriate DOD regulatory clearances, shipping documentation and instructions from your cognizant DCMA Transportation Office. If you are new to DCMA, and do not already have a SIR eTool account, you will first need to request an account via DCMA External Web Access Management (EWAM) application which can be accessed at http://www.dcma.mil. If you need additional assistance, email DCMA Transportation Group at: Transportation.Division@dcma.mil. Do not move any freight to a water or aerial port prior to contacting DCMA or it will become frustrated. Failure to contact the responsible DCMA may result in vendor incurring additional expenditures.

Vendor Transportation Instructions

IAW Basic Contract FD20301900113-00

TACRN:

AAA

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 648 47GT 15F16N 01N000 00000 000000 503000 F03000 FSR: 013352 PSR: K15282

First Destination Transportation Account Code:

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

FOB Destination

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 2840011911809PR

Purchase Instrument Line Item Number: 0002

Ship to (DoDAAC / MAPAC): tbdtbd

Mark For: fa mont

Ship To (Address):

WPOD:

APOD:

BBP / CCP:

RIC:

Requisition Number:

Supplemental Address:

FMS Case:

Ship To (Remarks):

Page 1 of 3DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 15 Oct 2018

NSN / Pseudo NSN: 2840DTH18029EPR

Purchase Instrument Line Item Number: 0003

Ship to (DoDAAC / MAPAC): tbdtbd

Mark For: fa mont

Ship To (Address):

RIC:

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

TACRN:

AAB

TRANSPORTATION FUNDS INFORMATION:

Purchase Instrument Line LOA: 97X4930.FC04 648 47GT 15F16N 01N000 00000 000000 503000 F03000 FSR: 013352 PSR: K15282

First Destination Transportation Account Code: FRS2

Miscellaneous Obligation / Reimbursement Document:

Second Destination Transportation Account Code:

FMS LOA:

Additional Funding Information:

ITEM / SHIP TO(s):

NSN / Pseudo NSN: 2840011911809PR

Purchase Instrument Line Item Number: 0001

Ship to (DoDAAC / MAPAC): SW3211

Mark For: Acct 09

Ship To (Address): DLA DISTRIBUTION DEPOT OKLAHOMA

TINKER AFB OK 73145-8000

73145 - 8000

USA

RIC: 1

3301 F AVE CEN REC BLDG 506 DR 22

EVALUATION OF PORT BID OR PROPOSAL:

SOLICITATION DATA NOTES:

OTHER TRANSPORTATION DATA:

Page 2 of 3DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 15 Oct 2018

NAME

Little, Phillip D

ORGANIZATION / OFFICE

SYMBOL

406 SCMS / GULAA

COMMERCIAL / DSN

PHONE

478-327-6350 / 497-6350

SIGNATURE

//SIGNED//Little, Phillip D

DATE

Page 3 of 3DD FORM 1653 Version 2Generated by PRPS using Jasper Reports on 15 Oct 2018

Contract Data Requirements List (CDRL)

(DD Form 1423)

Supplemental Section

Data Request Control Number

SCMG-5-11-128

DISTRIBUTION ADDRESSES

639 ACSG/PEC

ATTN: CEMS Monitor

6285 Hilltop Road Bldg 4008

Tinker AFB, OK 73145-2720

SCMG-5-11-128

C O N T R A C T D A T A R E Q U I R E M E N T S L I S T (1 Data Item)

Form Approved OMB No. 0704-0188

Public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA. 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project (0704-0188), Washington, DC 20503. Please DO NOT RETURN your form to either of these addresses. Send completed form to the Government Issuing Contracting Officer for Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:

TDP ______ TM ______ OTHER _X (MISC)_____________________

D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR

F110/Ring, Mount/2840-01-191-1809PR

1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE 17. PRICE

GROUP

A001 COMPREHENSIVE ENGINE MANAGEMENT SYSTEM (CEMS)

REPORTING

4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE 18.

ESTIMATED

TOTAL PRICE

DI-MGMT-81324A 639 ACSG/PEC

7. DD 250 REQ 9. DIST STATEMENT

REQUIRED

10. FREQUENCY 12. DATE OF FIRST

SUBMISSION

14. DISTRIBUTION

NO SEE BLOCK 16 SEE BLOCK 16 b. COPIES

8. APP CODE A 11. AS OF DATE 13. DATE OF SUBSEQUENT

SUBM.

a. ADDRESSEE Draft

Final

N/A SEE BLOCK 16 SEE BLOCK 16

Reg

Repro

16. REMARKS:

Blocks: 10, 11, 12, & 13:

Contractor shall provide CEMS reporting for all Engine Parts that have been identified as CEMS serially tracked items.

(U.S.) Contractor reporting responsibilities are described in T.O. 00-25-254-1 and update requirements are described in T.O. 00-25-254-2. CEMS reporting should be accomplished by contractor no later than Close of Business of the next business day following the date/time of the occurrence. Contractor shall obtain AF Portal and CEMS access. The contractor shall complete the forms required to obtain CEMS access per the New Contractor CEMS Access Process. All forms and instructions can be found on the CEMS web page.

https://cews.tinker.af.mil/

Once access is granted, the contractor shall update all serially tracked assets whether repaired or new production into CEMS.

Program Manager for the Contract:

Name:_________________________________ Phone #: _______________________________

(Overseas) contractor shall e-mail or fax an AF Form 1534 (CEMS CDB Report), or on a spreadsheet with the pertinent data to CEMS.PMO.HELPDESK@TINKER.AF.MIL or fax to 405-734-0666.

All forms and Documents can be found on the CEMS web page:

https://cews.tinker.af.mil/

CII: _______________________________

ES Coordination: ________________________________

639 ACSG/PEC

0 1

15. TOTAL -----------> 0 1 0

G. PREPARED BY H. DATE I. APPROVED BY J. DATE

Donna D. Lovern/848 SCMG Data Management Officer

10 May 11

DD Form 1423-1, 1 Jun 90 Previous Editions are Obsolete Page _1_ of _1_ Pages

INSTRUCTIONS FOR COMPLETING DD FORM 1423

(See DoD 5010.12M for detailed instructions.)

FOR GOVERNMENT PERSONNEL

Item A. Self-explanatory.

Item B. Self-explanatory.

Item C. Mark (X) appropriate category: TDP - Technical Data Package; TM - Technical Manual; Other - other category of data, such as 'Provisioning', 'Configuration Management', etc.

Item D. Enter name of system/item being acquired that data will support.

Item E. Self-explanatory (to be filled in after contract award).

Item F. Self-explanatory (to be filled in after contract award.

Item G. Signature of preparer.

Item H. Date CDRL was prepared.

Item I. Signature of CDRL approval authority.

Item J. Date CDRL was approved.

Item 1. See DoD FAR Supplement Subpart 4.71 for proper numbering.

Item 2. Enter title as it appears on data acquisition document cited in item 4.

Item 3. Enter subtitle of data item for further definition of data item (optional entry).

Item 4. Enter Data Item Description (DID) number, military specification number, or military standard number Listed in DoD 5010.12-L (AMSDL), or one-time DID number, that defines data content and format requirements.

Item 5. Enter reference to tasking in contract that generates requirement for the data item (e.g. Statement of Work paragraph number).

Item 6. Enter technical office responsible for ensuring adequacy of the data item.

Item 7. Specify requirement for inspection/acceptance of the data item by the Government.

Item 8. Specify requirement for approval of a draft before preparation of the final data item.

Item 9. For technical data, specify requirement for contractor to mark the appropriate distribution statement on the data (ref DoDD 5230.24).

Item 10. Specify number of times data items are to be delivered.

Item 11. Specify as-of date of data item, when applicable.

Item 12. Specify when first submittal is required.

Item 13. Specify when subsequent submittals are required, when applicable.

Item 14. Enter addresses and number of draft/final copies to be delivered to each addressee. Explain reproducible copies in item 16.

Item 15. Enter total number of draft/final copies to be delivered.

Item 16. Use for additional/clarifying information for items 1 through 15. Examples are: Tailoring of documents cited in Item 4;

Clarification of submittal dates in Items 12 and 13; Explanation of Reproducible copies in Item 14; Desired medium for delivery of the data item.

FOR THE CONTRACTOR

Item 17. Specify appropriate price group from one of the following groups of effort in developing estimated prices for each data item Listed on the DD Form 1423.

a. Group I. Definition - Data which is not otherwise essential to the contractor's performance of the primary contracted effort (production, development, testing and administration) but which is required by DD Form 1423.

Estimated Price - Costs to be included under Group I are those applicable to preparing and assembling the data item in conformance with Government requirements, and the administration and other expenses related to reproducing and delivering such data items to the Government.

b. Group II. Definition - Data which is essential to the performance of the primary contracted effort but the contractor is required to perform additional work to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, or quality of the data item.

Estimated Price - Costs to be included under Group II are those incurred over and above the cost of the essential data item without conforming to Government requirements, and the administrative and other expenses related to reproducing and delivering such data item to the Government.

c. Group III. Definition - Data which the contractor must develop for his internal use in performance of the primary contracted effort and does not require any substantial change to conform to Government requirements with regard to depth of content, format, frequency of submittal, preparation, control, and quality of the data item.

Estimated Price - Costs to be included under Group III are the administrative and other expenses related to reproducing and delivering such data item to the Government.

d. Group IV. Definition - Data which is developed by the contractor as part of his normal operating procedures and his effort in supplying these data to the Government is minimal.

Estimated Price - Group IV items should normally be shown on the DD Form 1423 at no cost.

Item 18. For each data item, enter an amount equal to that portion of the total price which is estimated to be attributable to the production or development for the Government of that item of data. These estimated data prices shall be developed only from those costs which will be incurred as a direct result of the requirement to supply data, over and above those costs which would otherwise be incurred in performance of the contract if no data were required. The estimated data prices shall not include any amount for rights in data. The Government's right to use data shall be governed by the pertinent provisions of the contract.

ENGINEERING DATA LIST

DATE:

REVISION: 11 *HISTORY*

CAGE:

07482

PAGE:

NSN:

DATA TECH:

Logan, Jamie

END ITEM:

F110100

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

GENERAL ELECTRIC COMPANY

REFERENCE NUMBER:

9530M56G13

NOUN:

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 07482 9530M56 AL 0000 S MOUNT, RING TURBINE

FRAME

L 07482 PL 9530M56 L 0000 S PARTS LIST

L 07482 J970 AF 0000 S INSERT

L 07482 P1TF3 0000 S INTERP DWG Logan, Jamie 13 AUG 2018

REVISION S34

NAME: DATE:

L 07482 P1TF9 0000 S MACHINED FEATURES Logan, Jamie 13 AUG 2018

REVISION S14

L 07482 P3TF2 0000 S FPI Logan, Jamie 13 AUG 2018

REVISION S29

L 07482 P3TF5 0000 S RADIOGRAPHIC INSP Logan, Jamie 13 AUG 2018

REVISION S16

L 07482 P3TF19 0000 S EXAM TITANIUN Logan, Jamie 13 AUG 2018

REVISION S3

L 07482 P4TF3 0000 S CLEANING TITANIUM Logan, Jamie 13 AUG 2018

REVISION S12

L 07482 P8TF3 0000 S GAS SHIELDED WELDING Logan, Jamie 13 AUG 2018

REVISION S20

L 07482 P8TF5 0000 S ELEC BEAM WELDING Logan, Jamie 13 AUG 2018

REVISION S12

L 07482 P12TF24 0000 S INSTALL INSERTS Logan, Jamie 13 AUG 2018

REVISION S9

L 07482 P23TF3 0000 S IDENT MARKING Logan, Jamie 13 AUG 2018

REVISION S40

L 07482 P29TF7 0000 S FPI LIMITS Logan, Jamie 13 AUG 2018

REVISION S6

L 00000 MIL-STD-130 0000 O IDENTIFICATION MARKING OF

U.S. MILITARY PROPERTY

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 2EDL Version 11Generated by PRPS using Jasper Reports on 15 Oct 2018

ENGINEERING DATA LIST

REVISION: 11 *HISTORY*

CAGE:

PAGE:

NSN:

DATA TECH:

Logan, Jamie

END ITEM:

F110100

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMAC/

MANUFACTURER NAME:

GENERAL ELECTRIC COMPANY

REFERENCE NUMBER:

9530M56G13

NOUN:

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 00000 SAE AS 8879 0000 O SCREW THREADS

L 00000 SAE AMS4911 0000 O TITANIUM ALLOY, SHEET,

STRIP AND PLATE

L 00000 SAE AMS4928 0000 O TITANIUM ALLOY BARS, WIRE,

FORGINE, RINGS

L 00000 SAE AMS4954 0000 O TITANIUM ALLOY, WELDING

WIRE

L 00000 SAE AMS4956 0000 O TITANIUM WELDING WIRE

L 00000 SAE AMS5643 0000 O STEEL, CORROSION

RESISTANT, BARS, WIRE,

FORGING

L 00000 SAE AMS7498 0000 O RINGS, FLASH WELDED

TITANIUM AND TITANIUM

ALLOYS

STANDARD ENGINEERING TEXT

Logan, Jamie 13 AUG 2018

1. RELEASE OF THIS DATA TO A FOREIGN-OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE. 2. THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE DATE OF THIS CONTRACT

UNLESS OTHERWISE NOTED.

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 2 of 2EDL Version 11Generated by PRPS using Jasper Reports on 15 Oct 2018

FIRST ARTICLE REQUIREMENTS 1. DATE

17 MAY 2018(AFMCI 64-110, AFMCI 23-102 and FAR Part 9, Sub Part 9.3)(Additional Instructions on Page 3)

2. PR / MIPR NUMBER 3. CAGE / REFERENCE NUMBER

07482 / 9530M56G13

4. NSN

5. FIRST ARTICLE QUANTITY

THE FIRST ARTICLE IS 3 UNIT(S) OF LOT / ITEM each

AND WILL BE: PART OF PRODUCTION QUANTITY X IN ADDITION TO PRODUCTION QUANTITY

6. ARTICLES

WILL X WILL NOT SERVE AS A MANUFACTURING STANDARD

7. LONG LEAD TIME ITEMS

X REQUIRED NOT REQUIRED

(See FAR 52.209-3 OR -4, alternate II)

8. SPECIAL REQUIREMENT/PRODUCTION FACILITIES (See FAR 52.209-3 OR -4 Alternate I)

X REQUIRED NOT REQUIRED

"The First Article offered must be manufactured at the facilities in which that item is to be produced under the contract, or if the First Article is a component not manufactured by the contractor, such component must be manufactured at the facilities in which the component is to be produced for the contract. A certification to this effect must accompany each First Article which is offered."

9. TEST / INSPECTION REQUIREMENTS

A.

X

CONTRACTOR TESTING

GOVERNMENT TESTING

Performance or other characteristics which the First Articles must meet are specified on the part drawing, in the referenced/called out specifications, and on the engineering instruction sheet.

B. The detailed technical requirements for First Article approval tests are contained in specified on the part drawing, in the referenced/called out specifications, and on the engineering instruction sheet. A fit check may also be performed.

(Cite Spec and Para number)

C. TEST PLAN REQUIRED

Number of days for government approval / disapproval days.

D. Contractor's notification to ACO and

(Requesting Activity) of test time and location due days prior to start of testing.

E. TEST REPORT REQUIRED

(1) Forwarded to

(2) Government written notice of approval / disapproval due days after receipt of contractor's report.

F. FIRST ARTICLE DELIVERY

(1) Due within 90 calendar days from date contract.

(2) Notify 30 calendar days prior to shipment.

(3) Delivered to government at

See Remarks in Block 12

(Set Forth Consignee and Address)

(4) Government written notice of approval / disapproval within 90 days after receipt of first article package.

G. Estimated cost of government testing / inspection evaluation.

$12,700.0000

Page 1 of 3AFMC IMT 260, 20020830, V-3 Version 3Generated by PRPS using Jasper Reports on 15 Oct 2018

17 MAY 2018(AFMCI 64-110, AFMCI 23-102 and FAR Part 9, Sub Part 9.3)(Additional Instructions on Page 3)

10. DISPOSITION OF FIRST ARTICLES

X Approved First Articles will be forwarded to

USAF supply

X 1 (insert quantity) First Articles will be expended in testing. Residual components of disapproved First Articles will be returned to the contractor

X will be retained by USAF pending disposition instructions from the contractor.

First Articles will be installed on aircraft/equipment to determine proper fit/function. Approved article will remain on the aircraft/equipment and will not be forwarded to USAF Supply, but will be considered part of the contract quantity.

X Disapproved First Articles will be returned to the contractor

X will be retained by USAF pending disposition instructions from the contractor.

On purchase requests designated as direct shipments the following disposition will apply. (NOTE: Always applicable on Foreign Military Sales (FMS)).

a. Approved First Articles will be returned to the contractor for shipment with production item.

b. Disposition of disapproved First Articles will remain the same as marked above.

Other Disposition:

11. CONDITION(S) FOR WAIVER OF FIRST ARTICLE APPROVAL

a. X Offerors who have previously furnished production quantities of the same or similar article to the prime contractor for delivery to the Government, DoD, X Air Force.

b. X Offerors currently in production of the same or similar article for a Government, DoD, X Air Force contract and who have received First Article approval under the existing contract.

c. X Offerors who have previously furnished production quantities of the same or similar articles to the Government, DoD, X Air Force, provided articles thus furnished, have exhibited satisfactory performance in service in the opinion of the Air Force.

d. X Provided not more than 36 months have elapsed since completion of the contract.

e. First Article testing will not be waived.

f. X See Remarks in block 12 below.

NOTE TO BUYER: UNDER CONDITIONS A AND C ABOVE, THE COGNIZANT ENGINEERING ACTIVITY WILL DECIDE WHETHER OR NOT THE ITEM HAS EXHIBITED SATISFACTORY PERFORMANCE IN SERVICE AND PREPARE AND RETAIN SUPPORTING DOCUMENTATION TO FULLY JUSTIFY THIS DECISION. THE BUYER MUST SOLICIT DUAL PRICES (That is, both with and without requirement for first article approval) AND MUST FURNISH THE COGNIZANT ENGINEERING ACTIVITY WITH THE FOLLOWING INFORMATION ON THE PREVIOUSLY SUPPLIED ARTICLE:

A. PROCURING OFFICE B. CONTRACT NUMBER C. DATE OF CONTRACT D. SPECIFICATION NUMBER AND REVISION

12. REMARKS

Baker, Stephen JNAME: 31 MAY 2018DATE:

The integrity, fit, and function of this item is critical to safe flight and engine operation. In order to comply with drawing specified dimensional tolerances, material certifications, and process requirements, a contractor must have expertise, appropriate facilities, and be able to implement stringent quality controls. It is therefore necessary to verify the contractor's ability to produce this item. Conditions for first article waiver are as outlined in block 11 above. Engineering will determine the status of similarity for block 11. A fit check may be performed at the discretion of the cognizant engineer overseeing first article testing.

BLOCK 5: For FMS contracts, use PART OF PRODUCTION QUANTITY in lieu of IN ADDITION TO PRODUCTION

QUANTITY

BLOCK 10: For FMS contracts, approved first articles will be returned to the contractor for shipment with production item and residual components of disapproved first articles will be returned to the contractor.

DELIVER GOVERNMENT FIRST ARTICLES TO

DDOO-SOP/FIRST ARTICLES

BLDG 18, DR 16

8080 PERIMETER RD

TINKER AFB, OK 73145-8000

DODAAC: FY2303

PHONE: 405-739-8596

Mark For: FIRST ARTICLES (Ensure the words "FIRST ARTICLES" are marked on the outside of the box)

ATTN: DDOO-SOP

DO NOT POST, NON-ACCOUNTABLE; DO NOT PUT INTO SUPPLY

Page 2 of 3AFMC IMT 260, 20020830, V-3 Version 3Generated by PRPS using Jasper Reports on 15 Oct 2018

17 MAY 2018(AFMCI 64-110, AFMCI 23-102 and FAR Part 9, Sub Part 9.3)(Additional Instructions on Page 3)

DODAAC: FY2303

13. COGNIZANT ENG ORGANIZATION RESPONSIBLE FOR APPROVING TEST

(Name, Organization, Phone)

Baker, Stephen J

AFLCMC / LP S E B A

405-734-4860

884-4860

14. COGNIZANT ENG ORGANIZATION RESPONSIBLE FOR CONDUCTING

TEST (Name, Organization, Phone)

Page 3 of 3AFMC IMT 260, 20020830, V-3 Version 3Generated by PRPS using Jasper Reports on 15 Oct 2018

CONTRACT DATA REQUIREMENTS LIST Form Approved OMB No. 0704-0188(1 Data Item)

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Executive Services Directorate (0704-0188).

Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY

TDP TM OTHER X

D. SYSTEM / ITEM

F110 / Ring, Mount

E. CONTRACT / PR NO.

FD20301900113

F. CONTRACTOR

1. DATA ITEM NO.

A001

2. TITLE OF DATA ITEM

Comprehensive Engine Management System (CEMS) Reporting

3. SUBTITLE

CEMS

4. AUTHORITY

DI-MGMT-81324C

(Data Acquisition Document No.) 5. CONTRACT REFERENCE

N/A

6. REQUIRING OFFICE

AFLCMC/LPZC CEMS PMO

7. DD 250 REQ

NO

8. APP CODE

N/A

9. DIST STATEMENT

REQUIRED

A

10. FREQUENCY

See Block 16

11. AS OF DATE

12. DATE OF FIRST

13. DATE OF SUBSEQUENT

a. ADDRESSEE

Draft Final

ReproReg

b. COPIES

14. DISTRIBUTION

16. REMARKS

Zilar, Dale NNAME: 22 AUG 2018DATE:

Block D: NSN: 2840-01-191-1809PR P/N: 9530M56G13

Block 9: Distribution Statement A: Approved for public release; distribution is unlimited. Controlling DoD office is 848

SCMG/421 GUEA.

Disposal and destruction notices: Dispose of by putting it in a recycle container or regular trash receptacle.

Blocks: 10, 11, 12, & 13:

Contractor shall provide CEMS reporting for all Engines and/or Parts that have been identified as CEMS serially tracked items.

1. (U.S.) Contractor reporting responsibilities are described in T.O. 00-25-254-1 and update requirements are described in T.O. 00-25-254-2.

(a) CEMS reporting should be accomplished by contractor no later than Close of Business of the next business day following the date/time of the occurrence.

(b) Contractor shall obtain AF Portal and CEMS access. The contractor shall complete the forms required to obtain CEMS access per the New Contractor CEMS Access Process. All forms and instructions are located on the CEMS web page: https://my.af.mil/gimmsprod/cpmo/.

(c) Once access is granted, the contractor shall update all serially tracked assets whether repaired or new production into

CEMS.

(d) THE PRIME CONTRACTOR IS RESPONSIBLE FOR PROCESSING SECURITY INVESTIGATION

PACKAGES FOR SUBCONTRACTOR PERSONNEL.

2. (Foreign Military Sales) Contractor shall e-mail or fax an AF Form 1534 (CEMS CDB Report), or a spreadsheet with the pertinent data to CEMS.PMO.Helpdesk@us.af.mil for fax to 405-734- 3807. All forms and documents are located on the CEMS web page: https://my.af.mil/gimmsprod/cpmo/.

CII: PF11CF1

COORDINATORS:

AFLCMC/LPZC

CEMS Program Management Office

0 1 0

0 1 015. TOTAL

G. PREPARED BY

Zilar, Dale N

424 SCMS / GUBAA

405-736-7976

H. DATE

06 SEP 2018

I. APPROVED BY

//DIGITALLY SIGNED//

RIETCHECK.JAYME.R.1513688772

AFLCMC / LPSEB 405-734-4676 / 884-4676

J. DATE

06 SEP 2018

Page 1 of 1DD FORM 1423-1, FEB 2001 Version 1Generated by PRPS using Jasper Reports on 15 Oct 2018

PREVIOUS EDITION MAY BE USED.

PACKAGING REQUIREMENTS

PURCHASE INSTRUMENT NUMBER: FD20301900113-00 VERSION: 2

MIL-STD 129 REVISION: R MIL-STD 2073-1 REVISION: E

THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES RESULTING IN SHIPMENTS WORLDWIDE (DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES). WOODEN LUMBER, WOODEN

PALLET AND PACKAGING/CONTAINER STATEMENT:

ALL WOODEN LUMBER, WOODEN PALLET'S, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD PACKING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES). CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES" (ISPM)NO.15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."

PACRN: PACKAGING REQUIREMENT: PRESERVATION LEVEL: PACKAGING LEVEL: SPI: SPI REV: SPI DATE:

AAB MIL Long Line Packaging MIL B

ITEM(S):

2840011911809PR 2840DTH18029EPR

CODED DATA:

QUP ICQ

PRES

METH CD

PRES

MTL

WRAP

MTL

CUSH

DUNN CT

UNIT

CONT

INT

CONT UCL

SPEC

MKG

UNIT PACK

WEIGHT

LENGTH

WIDTH

DEPTH

CUBE OPI

1 000 10 1 00 GB NA F EG 00 B 00 36.00 53.8 53.8 7.6 12.730 O

ADDITIONAL PACKAGING AND CONTAINER MARKING REQUIREMENTS:

SUPPLEMENTAL PACKAGING INSTRUCTION TEXT:

VENDOR PACKAGING INSTRUCTIONS:

Military Packaging and Marking Items shall be packaged in accordance with MIL-STD-2073-1, Standard Practice for Military Packaging. Shipping and storage markings shall be in accordance with MIL-STD-129, Standard Practice for Military Marking.

Shipping Container Marking Shipping containers shall be marked meeting the following criteria: (a) MIL-STD-129, Standard Practice for Military Marking. (b) Bar code format shall conform to bar code symbology Format 3 of 9, Code 39 as specified in MIL- STD-129. (c.) Additional marking and/or bar coding requirements exceeding those of MIL-STD-129 (e.g., unit serial numbers, original equipment manufacturers (OEM) name, or OEM model number, as specified on the AFMC Form 158.

ORGANIZATION / OFFICE SYMBOL:

406 SCMS / GULAA

PACKAGING SPECIALIST:

Lee, Michael J

PHONE NUMBER:

405-582-9767 / 852-9767

SIGNATURE:

//SIGNED//Lee, Michael J

18225 - 13 AUG 2018

Page 1 of 1AFMC 158 Version 2Generated by PRPS using Jasper Reports on 15 Oct 2018

DATA ITEM DESCRIPTION

Title: Comprehensive Engine Management System (CEMS) Reporting

Number: DI-MGMT-81324A Approval Date: 20060519 AMSC Number: F7567 Limitation:

DTIC Applicable: No GIDEP Applicable: No Office of Primary Responsibility: F/OC-ALC/448EPSG PE Applicable Forms: AF Form 1534, AF Form 41, DD Form 2875 Use/relationship: CEMS reporting is used by the government to maintain a complete and accurate worldwide inventory of Air Force engines, assemblies and parts. The CEMS reporting data consists of aircraft engine and maintenance status information.

a. This Data Item Description (DID) contains the requirements, to include access to the Internet, Air Force Portal, Global Integrated Maintenance Management System (GIMMS) Application and D042 (Comprehensive Engine Management System (CEMS)) mainframe for the purpose of reporting to CEMS for engine, assembly and parts. It also contains the format and content preparation instructions for the data reporting generated by the specific and discrete task requirement as delineated in the contract.

b. This DID is applicable when contractors report engine and module status or other parts life and status tracking data to CEMS.

c. Publications referenced below are available on the CEMS web site, https://cews.tinker.af.mil, at the Oklahoma City Air Logistics Center (OC-ALC) 448 Eagle Propulsion Sustainment Group/PE (CEMS Division), Tinker AFB, OK. This is a secure web site, but can be accessed by providing information requested after clicking on

“CLICK HERE”.

d. This DID supersedes DI-MGMT-81324.

Requirements:

1. Reference documents: The applicable issue of the documents cited herein, including their approval dates and dates of any applicable amendments, notices, and revisions, shall be as specified in the contract. Definitions and/or descriptions of the various data codes authorized for entry in the specified blocks of the Air Force Form 1534 are contained in United States Air Force Technical Order (T.O.) 00-25-254-1.

2. Format. Contractor format is acceptable for electronic reporting. Manually prepared data shall be in the format outlined on AF Form 1534.

3. Content. Inputs to CEMS: In order to accomplish the required access to systems for the purpose of reporting as referenced above, the following is required:

a. A minimum of a favorable National Agency Check (NAC) is required for any contractor accessing a Department of Defense (DoD) Information System. Procedures concerning Industrial Security Clearances and Investigations can be found at http://www.dss.mil/epsq or http://www.dss.mil/isec/psc_contractors.htm.

b. An AF Form 41 must be completed and faxed to Commercial 334 416-1040 to obtain an AF Portal account. The Form 41, as well as additional information may be obtained at https://www.my.af.mil, by accessing “View Account Requirements”.

http://www.dss.mil/epsq http://www.dss.mil/isec/psc_contractors.htm https://www.my.af.mil/

c. After AF Portal access is obtained, a DD Form 2875 and a Nondisclosure Statement must be completed requesting access to CEMS and GIMMS and forwarded to the CEMS Program Office. The form and Nondisclosure Statement may be downloaded from https://cews.tinker.af.mil, by clicking on the “Forms” folder and clicking “System Access”. Instructions are included with the form.

d. In order to access GIMMS via the Internet, Port 992 must be opened on the user’s firewall. The CEMS Program Office (405) 736-7630, should be contacted for further information.

3.1. Specific Instructions. The AF Form 1534 shall contain the following:

a. Block 1 – Report Control Symbol (RCS). The RCS is HAF-LEY (AR) 3215.

b. Block 2 – Subsystem Identifier. Indicate an “S” for status reporting or “C” for configuration reporting.

c. Block 3 – Configured Item Identifier (CII) Designation. The CII of the item being reported.

d. Block 4 – Serial Number. The item serial number.

e. Block 5 – Occurrence Date/Hour. The julian date and time the status change or event being reported occurred.

f. Block 6 – Stock Record Account Number (SRAN). The SRAN assigned to the reporting activity.

g. Block 7 – Command. The applicable major command (MAJCOM) and subcommand codes or contractor command code for the reporting activity.

h. Block 8 – Organization Code. Not applicable for contractor reporting.

i. Block 9 – Engine Ownership Account. The one position engine ownership account code.

j. Block 10 – Engine Type Report. The engine type report code.

k. Block 11 – Part Number. The part number is found on the data plate.

l. Block 12 – Transaction Code. The transaction code, selected from the codes contained in this block of the AF Form 1534, which describes the action being reported.

m. Block 13 – Condition Code. The condition code, selected from the codes contained in this block of the AF Form 1534, which describes the condition code applicable to the item being reported.

n. Block 14 – To/From Command/SRAN. The shipped to/from command and the SRAN. This block is blank for reports of transfer to or from classified projects.

o. Block 15 – Type of Shipping Device. The applicable four (4) position shipping device code selected from the codes contained in T.O. 00-85-20.

p. Block 16 – Sequence Control Number. The sequential control number assigned to each report prepared.

q. Block 17 – Engine-Related How Malfunction (HOW MAL) Code. The appropriate engine-related HOW MAL code. This entry is not applicable to missile engines.

r. Block 18 – Reason for Return to Overhaul Code. The appropriate reason for return to overhaul code.

s. Block 19 – Reparable Engine Serial Number. The serial number of the reparable engine being replaced by the serviceable shipment.

t. Block 20 – Primary/Secondary HOW MAL. The HOW MAL code for a module removed from an uninstalled engine.

u. Block 21 – Security Assistance Program (SAP) number. On “K” reports for engines gain to or from a SAP country, the SAP identification number.

v. Block 22 – Document Number/National Stock Number (NSN).

(1) The debit or credit number from the document covering gain and loss transactions.

(2) A local document number is optional for transaction codes “F”, “N” and “P” for on-SRAN transfers of engines/modules.

(3) For uninstalled reimbursable account transfer (“K” type report) to a non-Air Force account (SAP, Navy, Army, Federal Aviation Agency (FAA), etc.), the requesting activity’s requisition number provided by the prime engine manager.

(4) The NSN, dashes omitted, for establishing and updating a cannibalization record for the item cannibalized (“2L” transaction code).

w. Block 23 – Engine Flying Time. Normally obtained from the AFTO Form 781J, Aerospace Vehicle Flight Document or the AFTO Form 95, Significant Historical Data.

x. Block 24 – Cycle Sortie Count. Normally obtained from the AFTO Form 781J, Aerospace Vehicle Flight Document or the AFTO Form 95, Significant Historical Data.

y. Block 25 - Error Sequence Number. The sequence number from the transaction for which an error correction is being submitted.

z. Block 26 – Type, Model, Series, Modification (TMSM). The TMSM of the engine being reported.

aa. Block 27 – Next Higher Assembly (NHA) Designator. The NHA designation of the item upon which the reported item is being installed.

bb. Block 28 – NHA Serial Number. The serial number of the NHA upon which the reported item is being installed.

cc. Block 29 – Position No. The digit indicates the position in which the engine is installed in the aircraft.

dd. Block 30 – Remarks. “AF 1557” is entered if additional forms for engine recorder device reports are attached.

4. End of DI-MGMT-81324A.

ITEM DESCRIPTION

NSN

CAGE

REFERENCE NUMBER

9530M56G17

NOUN

END ITEM TCTO NUMBER TO NUMBER

2J-F110-3-5

CRITICALITY CODE

F

DEMILITARIZATION CODE

Q

SECURITY CODE

U

MDC

AAM

ES CODE

UB

INITIATOR

NAME

JAMES.L.WILSON5

ORGANIZATION / OFFICE SYMBOL

AFLCMC / LPSBD

DSN PHONE

884-4736

COMMERCIAL PHONE

405-734-4736

ITEM DESCRIPTION DATA

LENGTH ( IN )

41.0000

WIDTH ( IN )

41.0000

HEIGHT ( IN )

3.0000

WEIGHT ( LB )

10.0000

OTHER DIMENSIONS

OVERALL DIAMETER 40.960 INCHES MINIMUM AND 41.000 INCHES MAXIMUM

ITEM MATERIAL

Titanium Alloy

ITEM FUNCTION

RING MOUNT. APPL F110-GE-100 ENGINE FOR F16 AIRCRAFT,MODELS C AND D. PROVIDES REAR ENGINE MOUNTS FOR VERTICAL SIDE AND THRUST

LOADING AND SUPPORTS THE REAR OF OUTER DUCTS. COMPONENT OF TURBINE FRAME

SAFETY CRITICAL SCREW

THREADED COMPONENT

ESD CEMS X SENSITIVE DATA

STATEMENT OF HELIUM CONTENT (%) 0 PRECIOUS METAL INDICATOR CODE

GFM REQUIRED GFE REQUIRED GFP REQUIRED

JEWEL BEARING JEWEL BEARING RELATED

LEGACY ITEM DESCRIPTION

RING MOUNT. APPL F110 ENGINE FOR F16 AIRCRAFT,MODELS C AND D. PROVIDES REAR ENGINE MOUNTS FOR VERTICAL SIDE AND THRUST LOADING AND SUPPORTS THE REAR OF OUTER DUCTS. COMPONENT OF TURBINE FRAME ASSY. DIM AND MAT CONTENT N/A DUE TO LACK OF

ENGINEERING DATA.

Page 1 of 1ITEM DESCRIPTION Version 3Generated by PRPS using Jasper Reports on 15 Oct 2018