SPRMM1-20-R-RA35.pdf

252.204-7001 BE FURNISHED

SECTION A - COVER SHEET

(See Section L of the Table of Contents in

You are cautioned to note the "Certification of Non-Segregated Facilities" in the solicitation. Failure to agree to the certification will render your reply nonresponsive to the terms of solicitations involving awards of contracts exceeding $25,000 which are not exempt from the provisions of the Equal Opportunity clause.

"Fill-ins" are provided on the face and reverse of Standard Form 18 and Parts I and IV of Standard Form 33, or other solicitation documents and Sections of Table of Contents in this solicitation and should be examined for applicability.

See the provision of this solicitation entitled "Late Bids, Modifications of Bids or Withdrawal of Bids" or "Late Proposals, Modifications of Proposals and Withdrawals of Proposals."

When submitting your reply,the envelope used must be plainly marked with the Solicitation Number, as shown above and the date and local time set forth for bid opening or receipt of proposals in the solicitation document.

If NO RESPONSE is to be submitted, detach this sheet from the solicitation, complete the information requested on reverse,fold, affix postage, and mail. NO ENVELOPE IS NECESSARY.

Replies must set forth full, accurate, and complete information as required by this solicitation The penalty for making false statements is prescribed in 18 U.S.C.1001.

(X one).

a. SEALED BID

c. NEGOTIATED (RFQ)

INSTRUCTIONS

NOTE THE AFFIRMATIVE ACTION REQUIREMENT OF THE EQUAL OPPORTUNITY CLAUSE WHICH MAY APPLY TO THE CONTRACT

RESULTING FROM THIS SOLICITATION.

3. ISSUING OFFICE

(including attachments).

4. ITEMS TO BE PURCHASED

5 PROCUREMENT INFORMATION

a. THIS PROCUREMENT IS UNRESTRICTED

b. THIS PROCUREMENT IS A ______% SET-ASIDE FOR ONE OF THE FOLLOWING

1. SOLICITATION NUMBER

INFORMATION TO OFFERORS OR QUOTERS

6. ADDITIONAL INFORMATION

(1) Small Business (2) Labor Surplus Area Concerns (3) Combined Small Business/Labor Area Concerns

DD Form 1707, MAR 89 Previous editions are obsolete.

(Brief description)

(Complete mailing address, including Zip Code)

(X one) this solicitation for details of the set-aside.)

(X and complete as applicable)

461/089

2.

b. NEGOTIATED (RFP)

7. POINT OF CONTACT FOR INFORMATION

a. NAME (Last, First, Middle Initial) b. ADDRESS (Include Zip Code)

c. TELEPHONE NUMBER (Include Area Code and Extension) (NO COLLECT CALLS)

NOTE : IT IS REQUESTED THAT THE INFORMATION REQUIRED BY CLAUSES 52.204-4 AND

NOTE THE CLAUSE 52.232-25 ENTITLED "PROMPT PAYMENT" IN THE SOLICITATION.

NOTE : IT IS THE POLICY OF THE DOD TO MAXIMIZE THE NUMBER OF SMALL AND

DISADVANTAGED (SDB) CONCERNS PARTICIPATING IN DEFENSE PRIME AND SUBCONTRACTS.

IT IS REQUIRED THAT PRIME CONTRACTORS' SUBCONTRACT PLANS, WHEN REQUIRED

BY THE SOLICITATION, REFLECT A SDB GOAL OF 5% OR GREATER .

SPRMM1-20-R-RA35

X 19192-0075

DLA MARITIME - MECHANICSBURG

DLR PROCUREMENT OPS DLA-ZI

P. O. BOX 2020, 5450 CARLISLE PIKE

MECHANICSBURG PA 17055-0788

SEE SCHEDULE

* THIS PROCUREMENT IS SET-ASIDE FOR SMALL BUSINESSES

L.B. STROHECKER ZIBA1

DLA MARITIME - MECHANICSBURG

(717) 550-3372 MECHANICSBURG PA 17055-0788

I I I I I

KKKKKKKKKKKKKKKKKKKJ

KKKKKKKKKKKKKKKKKKKJ

e. OTHER

8. REASONS FOR NO RESPONSE

DD Form 1707 Reverse, MAR 89

(1) Typed or Printed Name

d. DO NOT REGULARLY MANUFACTURE OR SELL THE TYPE OF ITEMS INVOLVED

b. CANNOT MEET DELIVERY REQUIREMENT

c. UNABLE TO IDENTIFY THE ITEM(S)

a. CANNOT COMPLY WITH SPECIFICATIONS

9. MAILING LIST INFORMATION

WE DESIRE TO BE RETAINED ON THE MAILING LIST FOR FUTURE PROCUREMENT OF THE TYPE OF ITEM(S) INVOLVEDYES NO

10. RESPONDING FIRM

a. COMPANY NAME b. ADDRESS

c. ACTION OFFICER

(4) Date Signed

AFFIX

STAMP

HERE

(X all that apply)

FROM

DATE (YYMMDD)

SOLICITATION NUMBER

LOCAL TIME TO

(Last, First, Middle Initial) (YYMMDD)

(2) Title (3) Signature

FOLDFOLD

FOLD FOLD

(Specify)

(X one)

(INCLUDE ZIP CODE)

SPRMM1-20-R-RA35

2020 MAR 120 04:00 P.M.

I I

I I I or if handcarried, in the depository located in until local time (Date)

9. Sealed offers in original and copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, IV

III

III

INSTRS., CONDS., AND NOTICES TO OFFERORS

21. ACCOUNTING AND APPROPRIATION20. AMOUNT19. ACCEPTED AS TO ITEMS NUMBERED

SOLICITATION

M

M

M

Prescribed by GSA FAR (48 CFR) 53.214(c)

EVALUATION FACTORS FOR AWARD

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

LIST OF ATTACHMENTS

CONTRACT CLAUSES

M L

K

J

I

SEC. DESCRIPTION PAGE(S)

SPECIAL CONTRACT REQUIREMENTS

CONTRACT ADMINISTRATION DATA

DELIVERIES OR PERFORMANCE

INSPECTION AND ACCEPTANCE

H G F E D C B A

PACKAGING AND MARKING

DESCRIPTION/SPECS./WORK STATEMENT

SUPPLIES OR SERVICES AND PRICES/COSTS

SOLICITATION/CONTRACT FORM

14. ACKNOWLEDGMENT OF AMENDMENTS

opposite each item, delivered at the designated point(s), within the time specified in the schedule.

from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set

(60 calendar days unless a different12. In compliance with the above, the undersigned agrees, if this offer is accepted within ______ calendar days

CODE

(Signature of Contracting Officer)

10. FOR INFORMATION

CALL:

(Type or print)

11. TABLE OF CONTENTS

33-132

(If other than Item 7)24. ADMINISTERED BY

CODE

STANDARD FORM 33

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

25. PAYMENT WILL BE MADE BY

(If other than Item 7)8. ADDRESS OFFER TO

NSN 7540-01-152-8064

PREVIOUS EDITION NOT USABLE

7. ISSUED BY

RATING PAGE OF

PAGESSOLICITATION, OFFER AND AWARD

2. CONTRACT NO. 5. DATE ISSUED 6. REQUISITION/PURCHASE NO.4. TYPE OF SOLICITATION

A. NAME B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

15A. NAME

AND

ADDRESS

OF

OFFEROR

16. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN OFFER

(TYPE OR PRINT)

18. OFFER DATE17. SIGNATURE15B. TELEPHONE NO. (Include areacode) 15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE

27. UNITED STATES OF AMERICA 28. AWARD DATE

AWARD

(Hour)

NEGOTIATED (RFP)

CODE CODE

FACILITY

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

26. NAME OF CONTRACTING OFFICER

13. DISCOUNT FOR PROMPT PAYMENT

3. SOLICITATION NO.

period is inserted by the offeror)

(See Section I, Clause No. 52-232-8)

(The offeror acknowledges receipt of amendments to the SOLICITATION for offerors and related doc-uments numbered and dated:

10 CALENDAR DAYS 20 CALENDAR DAYS 30 CALENDAR DAYS CALENDAR DAYS

AMENDMENT NO. DATE AMENDMENT NO. DATE

SEC. PAGE(S)DESCRIPTION

(To be completed by Government)

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 350)

SEALED BID (IFB)

NOTE: In sealed bid solicitations "offer" and "offeror": mean "bid" and "bidder".

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-10. All offers are subject to all terms and conditions contained in this solicitation.

(REV. 4-85)

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

M ITEM23. SUBMIT INVOICES TO ADDRESS SHOWN IN(4 copies unless otherwise specified)41 U.S.C. 253(c)( )10 U.S.C. 2304(c)( )

OFFER (Must be fully completed by offeror)

PART - THE SCHEDULE PART - CONTRACT CLAUSES

PART - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACH.

PART - REPRESENTATIONS AND INSTRUCTIONS

DO-A3 1 51

SPRMM1-20-R-RA35 X 2020 JAN 30 19192-0075

SPRMM1

DLA MARITIME - MECHANICSBURG

DLR PROCUREMENT OPS DLA-ZI

P. O. BOX 2020, 5450 CARLISLE PIKE

MECHANICSBURG PA 17055-0788

BLDG.410, SOUTH END, CODE N7, BAY B-29 04:00PM 2020 MAR 02

L.B. STROHECKER ZIBA1 (717) 550-3372

X 1 X 11 X 2 X 3 X 29

X 5 X 8

X 9 X 29 X 9 X 49

X 50

I I I I

□ I

I I

I I I

I □ I

I

I I

PAGES

OFPAGEREFERENCE NO. OF DOCUMENT BEING CONTINUED

NAME OF OFFEROR OR CONTRACTOR

CONTINUATION SHEET

ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

SPRMM1-20-R-RA35 2 51

0001 NSN 7HH 5830-01-625-9732

PUBLIC ADDRESS SET SHELF LIFE 0-00

FOR REFERENCE ONLY

1K3W7 LRAD-1000XI-DM-NAVY

1Q3Z9 LRAD-1000XI-DM-NAVY

SEE TECHNICAL REQUIREMENTS IN SECTIONS C, D, E, AND ATTACHMENTS

HM QUP ICQ PMT CD PM WM CUD CT UC LP IC UCL SP MK PACK UNIT PKWT UNIT PKCU OPI

N 001 000 10 1 00 00 00 0 ED A 00 O 24 EQQ 0.0 0.000 O

PACKAGING IS IN ACCORDANCE WITH MIL-STD-2073

SHIP TO

0001AA N00104-19-X-C306 EA

TP: 3

INSPECTION AT ORIGIN

ACCEPTANCE AT ORIGIN

POC FAX: (717) 550-3231

POC EMAIL: LARRY.STROHECKER@DLA.MIL

TBD

I

CONTINUATION SHEET

SPRMM1-20-R-RA35

Page 2A of 51

(PLEASE NOTE THAT SECTIONS B THROUGH H MAY NOT BE IN ALPHABETICAL ORDER.

PLEASE READ SOLICITATION IN ITS ENTIRETY).

SECTION A - GENERAL INFORMATION FOR OFFERORS

1. The purpose of this solicitation is to establish an indefinite-delivery type contract for the supplies listed in

Section B, that will provide stock coverage for customers both overseas and in the United States, including

Alaska and Hawaii, and our possessions.

2. Under this solicitation, the resulting contract will be a Firm-Fixed-Price, Indefinite-Quantity Contract issued under FAR Part 15, with three (2) one year base periods and two (1) one year option periods. The total contract period will be three years. The terms “year” or “contract year,” as used in this solicitation, mean a period of 365 days beginning on the contract start date and every 365 days thereafter, except for a leap year, in which the contract year shall be 366 days.

3. The method used to place orders under this contract will be: Delivery Orders placed by DLA Maritime at

Mechanicsburg (DLA-Mech). DLA-Mech will issue delivery orders with the awardee for the supplies cited in Section B. This contract is not obligating any funds. Funding will be provided on each delivery order placed under the contract.

4. The proposals received in response to this solicitation will be evaluated under “Lowest Price Technically

Acceptable” procedures as described in Section M of this solicitation.

5. Some clauses/provisions may not appear in the correct section (D-M), due to system constraints.

6. The stated contract minimum and maximum is as follows:

a. Stated Contract Minimum: $57,600.00

b. Stated Contract Maximum: $4,320,000.00

The minimum value is calculated as ten (10) percent of the estimated annual demand value (ADV) for this item. The maximum value is calculated as seven hundred and fifty (750) percent of the estimated ADV.

*Note: Contract period as defined in this clause means the extended contract shall be inclusive of any/all option periods.

SECTION B – SCHEDULE OF SUPPLIES

This solicitation is for the acquisition of items manufactured per stated. Award will be made on an all or nothing basis.

1. Offerors shall provide their prices in the Section B Pricing Spreadsheet found below.

2. Section B – Pricing Spreadsheet.

CLIN NSN ADQ Quantity Ranges

FROM

Quantity Ranges

TO

Base Year

Base Year

Option Year

0001 To Be Assigned 16 1 10

11 20

21 30

31+

ADQ: Estimated Annual Demand Quantity

Quantity Ranges: Self-Explanatory (Offeror is authorized to quote alternate quantity ranges considered to be more advantageous to the Government)

Base Year One – Option Year One: Offeror shall fill in each base year and each option year unit price for each quantity range. All unit prices shall be priced as FOB Origin. Unit prices proposed shall not include shipping costs.

4. Please identify the following, if different from your facility/cage. If locations are the same as offeror’s address, offeror can indicate “SAME”.

CAGE for performance: ________________

CAGE for inspection: ________________

CAGE for acceptance: ________________

SECTION F – DELIVERIES

1. Place of Delivery: The place of delivery for all items to be acquired hereunder will be specified in individual delivery orders issued under the resultant Indefinite-Delivery Indefinite-Quantity contract.

2. Desired/Required Delivery:

DLA desires delivery of a quantity range up to 16 units to be delivered within 90 days after receipt of a delivery order.

If the offeror is unable to meet the desired delivery schedule stated above, it may, without prejudicing evaluation of its offer, propose a delivery schedule below. However the offeror’s proposed delivery schedule must not extend the delivery beyond the time for delivery in the Government’s required delivery schedule as follows:

DLA requires delivery of a quantity range up to 16 units to be delivered within 120 days after receipt of a delivery order.

Contractor’s proposed delivery schedule: _______________________________________________

CONTINUATION SHEET

Page 2B of 51

CONTINUATION SHEET

Page 2C of 51

1. ACCELERATED DELIVERIES: Accelerated deliveries in advance of the specified delivery schedule are authorized. Any accelerated delivery will be at no additional expense to the Government, unless specifically authorized by the Procuring or Administrative Contracting Officer.

2. PARTIAL SHIPMENTS: Shipments of item quantities less than each line item quantity specified in the delivery order schedule are authorized. Multiple shipments to one destination are authorized. Any partial shipment will be at no additional expense to the Government, unless specifically authorized by the Procuring or Administrative Contracting Officer.

SPRMM1-20-R-RA35 PAGE 3 OF 51

PART I - THE SCHEDULE

SECTION B

SUPPLIES OR SERVICES AND PRICES/COSTS

52.212-1

INSTRUCTIONS TO OFFERORS-COMMERCIAL ITEMS (AUG 2018)(DEVIATION 2018-O0018)

WSSTERMBZ04

IMPORTANT NOTICE REGARDING HAZARDOUS MATERIAL

FAR clause 52.223-3, Hazardous Material Identification and Material Safety Data, is incorporated by reference in Section I in this solicitation ad required offerors to--

(1) identify any hazardous material (defined in FED STD 313 as an item or chemical which is a "health or physical hazard" per OSHA in 29 CFR 1910.1200) that will be delivered under a resultant contract, and

(2) provide a Material Safety Data Sheet meeting OSHA/FED STD 313 requirements for all hazardous material identified.

While not an all-inclusive listing of hazardous material, at a minimum, any it em with a four-digit Federal Supply Code (FSC), which correlates to the first four positions of the National Stock Number (NSN), of 6810, 6820, 6830, 6840, 6850, 7930, 8010, 8030, 8040, 9110, 9135, 9140, 9150, or 9160 is considered hazardous material and requires submission of a Material Safety Data Sheet or an appropriate representation that there is no hazardous material contained in the item.

Failure to provide the required information and documentation may render you ineligible for award. If you have questions about whether a solicited item is classified as hazardous, contact the NAVSUP WSS HAZMAT point of contact, NAVSUP WSS Code 0772, at (717)605-1361. (10-06)

PART I - THE SCHEDULE

SECTION C

DESCRIPTION/SPECIFICATIONS/WORK STATEMENT

CLIN: 0001

NIIN: 016259732 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: PUBLIC ADDRESS SET

1. SCOPE

1.1 This contract/purchase order contains the requirements for manufacture and the contract quality requirements for the PUBLIC ADDRESS SET .

2. APPLICABLE DOCUMENTS

2.1 Applicable Documents - The document(s) listed below form a part of this contract/purchase order including modifications or exclusions.

2.1.1 "Document References" listed below must be obtained by the Contractor. Ordering information is included as an attachment to this contract/purchase order.

3. REQUIREMENTS

3.1 Cage Code/Reference Number Items - The PUBLIC ADDRESS SET furnished under this contract/purchase order shall be the design represented by Cage Code(s) reference number(s). Cage _______ ref. no.

<1K3W7 LRAD-1000XI-DM-NAVY>

3.2 Marking - This item shall be physically identified in accordance with <MIL-STD-130, REV N, 16 NOV 2012> .

3.3 Changes in Design, Material Servicing, or Part Number - Except for a Code 1 change, which shall be processed as provided in the code statement shown below, no substitution of items shall be made until the NAVICP-MECH Contracting Officer has notified and approval has been given by issuance of a written change order. When any change in design, material, servicing or part number is made to replace or substitute any item to be furnished on this contract/purchase order, the Contractor shall furnish, for the substituting/replacement item, a drawing and an explanation of the reason for the change, explaining the reason therefor. If finished detail drawings are not

SPRMM1-20-R-RA35 PAGE 4 OF 51

available, shop drawings in the form used by the manufacturer will be acceptable for Government evaluation. When notifying the Procurement Contracting Officer of the reasons for making substitutions, the type of change shall be indicated by code number in accordance with one of the following statements:

Code 1: PART NUMBER CHANGE ONLY - If the Manufacturer's Part Number indicated thereon has changed, but the parts are identical in all respects, supply the item and advise NAVICP-MECH immediately of the new part number.

Code 2: Assembly (or set or kit) not furnished - Used following detail parts.

Code 3: Part not furnished separately - Use assembly.

Code 4: Part redesigned - Old and new parts are completely interchangeable.

Code 5: Part redesigned - New part replaces old. Old part cannot replace new.

Code 6: Part redesigned - Parts not interchangeable.

252.211-7005

SUBSTITUTIONS FOR MILITARY OR FEDERAL SPECIFICATIONS AND STANDARDS (NOV 2005)

(a) Definition. "SPI process," as used in this clause, means a management or manufacturing process that has been accepted previously by the Department of Defense under the Single Process Initiative (SPI) for use in lieu of a specific military or Federal specification or standard at specific facilities. Under SPI, these processes are reviewed and accepted by a Management Council, which includes representatives of the Contractor, the Defense Contract Management Agency, the Defense Contract Audit Agency, and the military departments.

(b) Offerors are encouraged to propose SPI processes in lieu of military or Federal specifications and standards cited in the solicitation. A listing of SPI processes accepted at specific facilities is available via the Internet at:

http://guidebook.dcma.mil/20/guidebook_process.htm (paragraph 4.2).

(c) An offeror proposing to use an SPI process in lieu of military or Federal specifications or standards cited in the solicitation shall

(1) Identify the specific military or Federal specification or standard for which the SPI process has been accepted;

(2) Identify each facility at which the offeror proposes to use the specific SPI process in lieu of military or Federal specifications or standards cited in the solicitation;

(3) Identify the contract line items, subline items, components, or elements affected by the SPI process;

and

(4) If the proposed SPI process has been accepted at the facility at which it is proposed for use, but is not yet listed at the Internet site specified in paragraph (b) of this clause, submit documentation of Department of Defense acceptance of the SPI process.

(d) Absent a determination that an SPI process is not acceptable for this procurement, the Contractor shall use the following SPI processes in lieu of military or Federal specifications or standards:

(Offeror insert information for each SPI process)

SPI Process:_________________________________________________________________

Facility:____________________________________________________________________

Military or Federal Specification or Standard:___________________________________________________

Affected Contract Line Item Number, Subline Item Number, Component, or Element:_______________________________________________________

(e) If a prospective offeror wishes to obtain, prior to the time specified for receipt of offers, verification that an SPI process is an acceptable replacement for military or Federal specifications or standards required by the solicitation, the prospective offeror:

(1) May submit the information required by paragraph (d) of this clause to the Contracting Officer prior to submission of an offer; but

(2) Must submit the information to the Contracting Officer at least 10 working days prior to the date specified for receipt of offers.

SPRMM1-20-R-RA35 PAGE 5 OF 51

PART I - THE SCHEDULE

SECTION D

PACKAGING AND MARKING

CLIN: 0001

NIIN: 016259732 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: PUBLIC ADDRESS SET

5. PACKAGING

5.1 Preservation, Packaging, Packing and Marking - Preservation, Packaging, Packing and Marking shall be in accordance with the Contract/Purchase Order Schedule and as specified below.

MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE

252.211-7003

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(a) Definitions. As used in this clause- "Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier; original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO)/International Electrotechnical Commission (IEC) 16022.

"Data qualifier' means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html "DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot or batch number; and the serial number.

"Enterprise" means the entity (e.g., a manufacturer or vendor) responsible for assigning unique item identifiers to items.

"Enterprise identifier" means a code that is uniquely assigned to an enterprise by an issuing agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise

SPRMM1-20-R-RA35 PAGE 6 OF 51

252.211-7003 (CONT)

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

"Lot or batch number" means an identifying number assigned by the enterprise to a designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a combination of numbers, letters, or symbols assigned by the enterprise to an item that provides for the differentiation of that item from any other like and unlike item and is never used again within the enterprise.

"Serial number within the part, lot, or batch number" means a combination of numbers or letters assigned by the enterprise to an item that provides for the differentiation of that item from any other like item within a part, lot, or batch number assignment.

"Serialization within the enterprise identifier" means each item produced is assigned a serial number that is unique among all the tangible items produced by the enterprise and is never used again. The enterprise is responsible for ensuring unique serialization within the enterprise identifier.

"Serialization within the part, lot, or batch number" means each item of a particular part, lot, or batch number is assigned a unique serial number within that part, lot, or batch number assignment. The enterprise is responsible for ensuring unique serialization within the part, lot, or batch number within the enterprise identifier.

"Type designation" means a combination of letters and numerals assigned by the Government to a major end item, assembly or subassembly, as appropriate, to provide a convenient means of differentiating between items having the same basic name and to indicate modifications and changes thereto.

"Unique item identifier" means a set of data elements marked on items that is globally unique and unambiguous. The term includes a concatenated unique item identifier or a DoD recognized unique identification equivalent.

"Unique item identifier type" means a designator to indicate which method of uniquely identifying a part has been used.

The current list of accepted unique item identifier types is maintained at http://www.acq.osd.mil/dpap/pdi/uid/uii_types.html.

(b) The Contractor shall deliver all items under a contract line, subline, or exhibit line item.

(c) Unique item identifier.

(1) The Contractor shall provide a unique item identifier for the following:

(i) Delivered items for which the Government's unit acquisition cost is $5,000 or more; except for the following line items" Contract Line, Subline, or Exhibit Line Item Number Item Description

(ii) Items for which the Government's unit acquisition cost is less than $5,000 that are identified in

SPRMM1-20-R-RA35 PAGE 7 OF 51

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

the Schedule or the following table:

Contract Line, Subline, Or Exhibit Line Item Number Item Description

(If items are identified in the Schedule, insert (See Schedule" in this table.)

(iii) Subassemblies, components, and parts embedded within delivered items, items with warranty requirements, DoD serially managed reparables and DoD serially managed nonreparables as specified in Attachment Number < > .

(iv)Any item of special tooling or special test equipment as defined in FAR 2.101 that have been designated for preservation and storagefor a Major Defense Acquisition Program as specified in Attachment Number < > .

(v) Any item not included in (i), (ii), (iii), or (iv) for which the contractor creates and marks a unique item identifier for traceability.

(2) The unique item identifier assignment and its component data element combination shall not be duplicated on any other item marked or registered in the DoD Item Unique Identification Registry by the contractor.

(3) The unique item identifier component data elements shall be marked on an item using two dimensional data matrix symbology that complies with ISO/IEC International Standard 16022, Information technology - International symbology specification - Data matrix; ECC200 data matrix specification.

(4) Data syntax and semantics of unique item identifiers. The Contractor shall ensure that --

(i) The data elements (except issuing agency code) of the unique item identifier are encoded within the data matrix symbol that is marked on the item using one of the following three types of data qualifiers, as determined by the Contractor:

(A) Application Identifiers (AIs) (Format Indicator 05 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(B) Data Identifiers (DIs) (Format Indicator 06 of ISO/IEC International Standard 15434), in accordance with ISO/IEC International Standard 15418, Information Technology - EAN/UCC Application Identifiers and Fact Data Identifiers and Maintenance and ANSI MH 10.8.2 Data Identifier and Application Identifier Standard.

(C) Text Element Identifiers (TEIs)(Format Indicator 12 of ISO/IEC International Standard 15434), in accordance with the Air Transport Association Common Support Data Dictionary; and.

(ii) The encoded data elements of the unique item identifier conform to the transfer structure, syntax, and coding of messages and data formats specified for Format Indicators 05, 06, and 12 in ISO/IEC International Standard 15434, Information Technology - Transfer Syntax for High Capacity Automatic Data Capture Media.

(5) Unique item identifier.

(i) The Contractor shall-

(A) Determine whether to-

(1) Serialize within the enterprise identifier;

(2) Serialize within the part, lot, or batch number; or

(3) Use a DoD recognized unique identification equivalent; (e.g. Vehicle Identification Number):

and

(B) Place the data elements of the unique item identifier (enterprise identifier; serial number: DoD recognized unique identification equivalent; and for serialization within the part, lot, or batch number only:

original part, lot or batch number) on items requiring marking by paragraph (c)(1) of this clause, based on the criteria provided in MIL-STD-130, Identification Marking of U.S. Military Property, latest version:

(C) Label shipments, storage containers and packages that contain uniquely identified items in accordance with the requirements of MIL-STD-129, Military Marking for Shipment and Storage, latest version; and

(D) Verify that the marks on items and labels on shipments, storage containers, and conform to the applicable standards. The contractor shall use an automatic identification technology device for this verification that has been programmed to the requirements of Appendix A, MIL-STD-130, latest version.

(ii) The issuing agency code-

(A) Shall not be placed on the item; and

(B) Shall be derived from the data qualifier for the enterprise identifier.

(d) For each item that requires item unique identification under paragraph (c)(1)(i)(ii) or (iv) of this clause, or when item unique identification is provided under paragraph (c)(1)(v) in addition to the information provided as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the Contractor shall report at the time of delivery, as part of the Material Inspection and Receiving Report, the following information:

(1) Unique item identifier.

(2) Unique item identifier type.

(3) Issuing agency code (if concatenated unique item identifier is used).

(4) Enterprise identifier (if concatenated unique item identifier is used).

(5) Original part number (if there is serialization within the original part number)

(6) Lot or batch number (if there is serialization within the lot or batch number).

SPRMM1-20-R-RA35 PAGE 8 OF 51

ITEM UNIQUE IDENTIFICATION AND VALUATION (MAR 2016)

(7) Current part number (optional and only if not the same as the original part number).

(8) Current part number effective date (optional and only if current part number is used).

(9) Serial number (if concatenated unique item identifier is used).

(10) Government's unit acquisition cost.

(11) Unit of measure.

(12) Type designation of the item as specified in the contract schedule, if any.

(13) Whether the item is an item of Special Tooling or Special Test Equipment.

(14) Whether the item is covered by a warranty.

(e) For embedded subassemblies, components, and parts that require DoD item unique identification under paragraph (c)(1)(iii) of this clause, or when item unique identification is provided under paragraph (c)(1(v), the Contractor shall report as part of the Material Inspection and Receiving Report specified elsewhere in this contract, the following information:

(1) Unique item identifier of the parent item under paragraph (c)(1) of this clause that contains the embedded subassembly, component, or part.

(2) Unique item identifier of the embedded subassembly, component, or part.

(3) Unique item identifier type.**

(4) Issuing agency code (if concatenated unique item identifier is used).**

(5) Enterprise identifier (if concatenated unique item identifier is used)**

(6) Original part number.**(if there is serialization within the original part number).**

(7) Lot or batch number.(if there is serialization within the lot or batch number).**

(8) Current part number (optional and only if not the same as the original part number).**

(9) Current part number effective date (optional and only if current part number is used).**

(10) Serial number (if concatenated unique item identifier is used**)**

(11) Description.

** Once per item.

(f) The Contractor shall submit the information required by paragraphs (d) and (e) of this clause as follows:

(1) End items shall be reported using the receiving report capability in Wide Area Work Flow (WAWF) in accordance with the clause at 252.232-7003. If WAWF is not required by this contract, and the contractor is not using WAWF, follow the procedures at http://dodprocurementtoolbox.com/site/uidregistry/.

(2) Embedded items shall be reported by one of the following methods-

(i) Use of the embedded items capability in WAWF;

(ii) Direct data submission to the IUID Registry following the procedures and formats at http:/dodprocurementtoolbox.com/site/ uidregistry/; or

(iii) Via WAWF as a deliverable attachment for exhibit line item number < > , Unique Item Identifier

Report for Embedded Items, Contract Data Requirements List, DD Form 1423.

(g) Subcontracts. If the Contractor acquires by subcontract, any item(s) for which item unique identification is required in accordance with paragraph (c)(1) of this clause, the Contractor shall include this clause, including this paragraph (g) in the applicable subcontract(s) including subcontracts for commercial items.

PART I - THE SCHEDULE

SECTION E

INSPECTION AND ACCEPTANCE

CLIN: 0001

NIIN: 016259732 ACTIVITY USE ONLY: TDP VERSION NO.: 005

ITEM NAME: PUBLIC ADDRESS SET

4. QUALITY ASSURANCE

4.1 Responsibility for Inspection - Unless otherwise specified in the contract/purchase order, the Contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract/purchase order, the Contractor may use his own or any other facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

4.2 Responsibility for Compliance - All items must meet all requirements of this contract/purchase order. The inspection set forth in this specification shall become a part of the Contractor's overall inspection system or quality program. The absence of any inspection requirements shall not relieve the Contractor of the responsibility of assuring that all products or supplies submitted to the Government for acceptance comply with all requirements of

SPRMM1-20-R-RA35 PAGE 9 OF 51

the contract/purchase order. Sampling in quality conformance does not authorize submission of known defective material, either indicated or actual, not does it commit the Government to acceptance of defective material.

4.3 Records - Records of all inspection work by the Contractor shall be kept complete and available to the Government during the performance of contract/purchase order and for a period of 365 calendar days after final delivery of supplies.

52.246-16

RESPONSIBILITY FOR SUPPLIES (APR 1984)

52.246-2

INSPECTION OF SUPPLIES--FIXED-PRICE (AUG 1996)

This clause is incorporated by reference with the same force and effect as if it were given in full text.

( < > ) Alternate I (JUL 1985) applies when a fixed-price incentive contract is contemplated.

( < > ) Alternate II (JUL 1985) applies when a fixed-ceiling-price contract with retroactive price redetermination is contemplated.

WSSTERMEZ04

INSPECTION AND ACCEPTANCE - SHORT VERSION

Supplies furnished hereunder shall be inspected at <X> contractor's and/or subcontractor's plant or < > destination. Acceptance shall be at <X> contractor's and/or subcontractor's plant or < > destination.

Manufacturing Site_ < > ______________________________________________ Address_ < >

If supplies will be packaged at a location different from the offeror address indicated on the solicitation, the offeror shall provide the name and street address of the packaging location:

Packaging House _ < > __________________________________________________Address < > __________________________________________________________ (06-02)

PART I - THE SCHEDULE

SECTION F

DELIVERIES OR PERFORMANCE

52.242-17

GOVERNMENT DELAY OF WORK (APR 1984)

52.247-29

F.O.B. ORIGIN (FEB 2006)

52.247-61

F.O.B. ORIGIN-MINIMUM SIZE OF SHIPMENTS (APR 1984)

PART I - THE SCHEDULE

SECTION G

CONTRACT ADMINISTRATION DATA

252.232-7006

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

(a) Definitions. As used in this clause--

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document Type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow

(WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

SPRMM1-20-R-RA35 PAGE 10 OF 51

252.232-7006 (CONT)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, electronic Submission of Payment Requests and Receiving Reports.

(b) Electronic invoicing. The WAWF system provides the method to electronically process vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) WAWF access. To access WAWF, the Contractor shall--

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the Webb Based Training link on the WAWF home page at https://wawf.eb.mil/

(e) WAWF methods of document submission. Document submissions may be via web entry, Electronic Data Interchange, or File Transfer Protocol.

(f) WAWF payment instructions. The Contractor shall use the following information when submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) Document type. The Contractor shall submit payment requests using the following document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items--

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

( <INVOICE AND RECEIVING REPORTS (COMBO)> )(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

( <N/A> )(Contracting Officer: Insert either Invoice 2in1 or the applicable invoicece and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial item financing, submit a commercial item financing request.

(2) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

(f) (Note: The Contractor may use a WAWF combo document type to create some combinations of invoice and receiving report in one step.)

(3)Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

SPRMM1-20-R-RA35 PAGE 11 OF 51

252.232-7006 (CONT)

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (DEC 2018)

Routing Data Table Field Name in WAWF Data to be entered in WAWF Pay Official DoDAAC ( <TBD> ) Issue By DoDAAC ( <SPRMM1> ) Admin DoDAAC ( <TBD> ) Inspect By DoDAAC ( <TBD> ) Ship To Code ( <SEE SCHEDULE> ) Ship From Code ( <TBD> ) Mark For Code ( <SEE SCHEDULE> ) Service Approver (DoDAAC) ( < > ) Service Acceptor (DoDAAC) ( <TBD> ) Accept at Other DoDAAC ( < > ) LPO DoDAAC ( < > ) DCAA Auditor DoDAAC ( < > ) Other DoDAAC(s) ( < > )

(Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert See Schedule or Not applicable.)

(Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) Payment request. The Contractor shall ensure a payment request includes documentation appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) Receiving report. The Contractor shall ensure a receiving report meets the requirements of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activitys WAWF point of contact.

( < > )(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

PART II - CONTRACT CLAUSES

SECTION I

CONTRACT CLAUSES

252.226-7001

UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC ENTERPRISES, AND NAT

IVE HAWAIIAN SMALL BUSINESS CONCERNS (APR 2019)

52.204-7

SYSTEM FOR AWARD MANAGEMENT (OCT 2018)

52.215-8

ORDER OF PRECEDENCE--UNIFORM CONTRACT FORMAT (OCT 1997)

52.222-26

EQUAL OPPORTUNITY (SEP 2016)

This clause is incorporated by reference (IBR) with the same force and effect as if it were given in full text.

If checked, the alternate below applies:

SPRMM1-20-R-RA35 PAGE 12 OF 51

52.222-26 (CONT)

EQUAL OPPORTUNITY (SEP 2016)

( < > ) Alternate I (Feb 1999). As prescribed in 22.810(e), add the following as a preamble to the clause

Notice: The following terms of this clause are waived for this contract < > (Contracting Officer shall list terms).

252.215-7008

ONLY ONE OFFER (JUN 2019)

(a) Cost or pricing data requirements. After initial submission of offers, if the Contracting Officer notifies the Offeror that only one offerwas received, the Offeror agrees to--

(1) Submit any additional cost or pricing data that is required in order to determine whether the price is fair and reasonable or to comply withthe statutory requirement for certified cost or pricing data (10 U.S.C. 2306a and FAR 15.403-3); and

(2) Except as provided in paragraph (b) of this provision, if the acquisition exceeds the certified cost or pricing data threshold and an exception to the requirement for certified cost or pricing data at FAR 15.403-1(b)(2) through (5) does not apply, certify all cost or pricing data in accordance with paragraph (c) of DFARS provision 252.215-7010, Requirements for Certified Cost or Pricing Data and Data OtherThan Certified Cost or Pricing Data, of this solicitation.

(b) Canadian Commercial Corporation. If the Offeror is the Canadian Commercial Corporation, certified cost or pricing data are not required. If theContracting Officer notifies the Canadian Commercial Corporation that additional data other than certified cost or pricing data are required in accordance with DFARS 225.870-4(c), the Canadian Commercial Corporation shall obtain and provide the following:

(1) Profit rate or fee (as applicable).

(2) Analysis provided by Public Works and Government Services Canada to the Canadian Commercial Corporation to determine a fair and reasonable price (comparable to the analysis required at FAR 15.404-1).

(3) Data other than certified cost or pricing data necessary to permit adetermination by the U.S. Contracting

Officer that the proposed price is fair and reasonable (U.S. Contracting Officer to provide description of the data required in accordance with FAR 15.403-3(a)(1) with the notification).

(4) As specified in FAR 15.403-3(a)(4), an offeror who does not comply with a requirement to submit data that the U.S. Contracting Officer has deemed necessary to determine price reasonableness or cost realism is ineligible for award unless the head of the contracting activity determines that it is in the best interest of the Government to make the award to that offeror.

(c) Subcontracts. Unless the Offeror is the Canadian Commercial Corporation, the Offeror shall insert the substance of this provision, including this paragraph (c), in all subcontracts exceeding the simplified acquisition threshold defined in FAR part 2.

252.232-7003

ELECTRONIC SUBMISSION OF PAYMENT REQUESTS & RECEIVING REPORTS (DEC 2018)

52.215-18

REVERSION OR ADJUSTMENT OF PLANS FOR POSTRETIREMENT BENEFITS (PRB) OTHER THAN

PENSIONS (JULY 2005)

252.225-7001

BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM -BASIC (DEC 2017)

52.222-35

EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

(a) Definitions. As used in this clause--

"Active duty wartime or campaign badge veteran," "Armed Forces service medal veteran," "disabled veteran," "protected veteran," "qualified disabled veteran,' and "recently separated veteran" have the meanings given at FAR 22.1301.

(b) Equal opportunity clause. The Contractor shall abide by the requirements of the equal opportunity clause at 41 CFR 60-300.5(a), as of March 24, 2014. This clause prohibits discrimination against qualified protected veterans, and requires affirmative action by the Contractor to employ and advance in employment qualified protected veterans.

If checked, the alternate below applies:

(c) Subcontracts. The Contractor shall insert the terms of this clause in subcontracts of $150,000 or more unless exempted by rules, regulations, or orders of the Secretary of Labor. The Contractor shall act as specified by the Director, Office of Federal Contract Compliance Programs, to enforce the terms, including action for noncompliance. Such necessary changes in language may be made as shall be appropriate of identify properly the parties and their undertakings.

SPRMM1-20-R-RA35 PAGE 13 OF 51

52.222-35 (CONT)

EQUAL OPPORTUNITY FOR VETERANS (OCT 2015)

( < > ) Alternate I (Jul 2014) As prescribed in 22.1310(a)(2), add the following as a preamble to the clause:

Notice: The following term(s) of this clause are waived for this contract: List term(s).

252.232-7010

LEVIES ON CONTRACT PAYMENTS (DEC 2006)

252.225-7012

PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (DEC 2017)

252.244-7000

SUBCONTRACTS FOR COMMERCIAL ITEMS (JUN 2013)

(a) The Contractor is not required to flow down the terms of any Defense Federal Acquisition Regulation Supplement (DFARS) clause in subcontracts for commercial items at any tier under this contract, unless so specified in the particular clause.

(b) While not required, the Contractor may flow down to subcontracts for commercial items a minimal number of additional clauses necessary to satisfy its contractual obligation.

(c) The Contractor shall include the terms of this clause, including this paragraph (c), in subcontracts awarded under this contract, including su bcontracts for the acquisition of commercial items.

52.219-28

POST-AWARD SMALL BUSINESS PROGRAM REREPRESENTATION (JUL 2013)

(a) Definitions. As used in this clause- "Long-term contract" means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, OPTION TO EXTEND SERVICES, OR

OTHER APPROPRIATE AUTHORITY.

"Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contract, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this…