EDR.pdf
PDF 108 KB Posted
- Attached to
- JTE Radar Transmitters Federal contract opportunity
- Solicitation number
- SPRHA5-20-R-1498
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a pulse magnetron transmitter (JTE) as part of a federal contract opportunity with the Defense Logistics Agency Aviation. Key details include the part number (A9070-060702) and National Stock Number (5840016564618FD) for the transmitter. Manufacturing must comply with the specifications and standards listed, including applying unique identification per MIL-STD-130 with human and machine readable tags including cage code, part number, and serial number. Deviations from control drawings require prior engineering approval.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPIRES.pdf | ||
| SPRHA520R1498.pdf | ||
| CDRL.pdf | ||
| SQSforsolicitation.pdf | ||
| EDL.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
PULSE MAGNETRON TRANSMITTER (JTE)
2. PART NUMBER:
A9070-060702
3. NATIONAL STOCK NUMBER:
5840016564618FD
PREPARED BY:
ROGER FONG
OFFICE SYMBOL:
415 SCMS/GUMBB
DATE:
20190207
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE
DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL‐STD‐130 IN LIEU OF FPS‐3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL‐STD‐130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .