EDR.pdf

PDF 15 KB Posted

Attached to
Receiver Sub assembly Federal contract opportunity
Solicitation number
SPRHA5-20-R-0122
Issued by
Defense Logistics Agency Aviation

About this file

Written by GovTribe AI ·

This solicitation requests offers for a receiver subassembly and counterfeit prevention plan. The government seeks three receiver subassemblies identified as national stock number 5840016602373FD with part number A1056-000002. Offers are due by June 1, 2021 for delivery to Hill Air Force Base. Offerors must also provide a counterfeit prevention plan within 30 calendar days of award. The solicitation was issued through the Defense Logistics Agency Aviation and is being distributed electronically to Amherst Systems, Inc. and SRC, Inc. All responsible sources may submit a proposal for consideration by the agency.

View the file

Other files for this federal contract opportunity

Other files attached to Receiver Sub assembly, newest first.
File Type Posted
MQR.pdf PDF
SPI.pdf PDF
EDL.pdf PDF
CDRL.pdf PDF
SOW.pdf PDF
SPRHA520R0122.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

RECEIVER SUBASSEMBLY

2. PART NUMBER:

A1056-000002

3. NATIONAL STOCK NUMBER:

5840-01-660-2373FD

PREPARED BY:

LEVI ALLERY

OFFICE SYMBOL:

415 SCMS/GUEA

DATE:

20191112

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA

WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING

ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL

BY THE COGNIZANT ENGINEERING ACTIVITY.

7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.

8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY

UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.

9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:

A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:

1. CAGE (17V)

2. P/N (1P)

3. SERIAL NUMBER (1S)

B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO

INCLUDE:

1. CAGE (17V)

2. P/N (1P)

3. SERIAL NUMBER (1S)

C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE

REPLACED.

D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING

LABEL.

E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.

File details come from the government source that posted it. Updated .