EDR.pdf

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

DOOR ASSY - NOSE LANDING GEAR (F-16)

2. PART NUMBER:

16L060-5

3. NATIONAL STOCK NUMBER:

1560-01-283-0913WF

PREPARED BY:

1ST LT TORIN QUICK

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

06/06/2017

HILL AFB FORM 462 Page 1 of 2

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA

WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY OO-ALC ENGINEERING

7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE

COMPLIED WITH PER MIL-STD-130

8. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.

A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY

DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.

B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).

C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.

D. IUID MARKING MUST BE PERMANENT.

E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418

F. IUID MARKING SPECIFICATIONS.

1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:

A. CAGE (17V)

B. P/N (1P)

C. SERIAL NUMBER (IS)

2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE

A. CAGE (17V)

B. P/N (1P)

C. SERIAL NUMBER (IS)

9. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16L060-7 FOR MANUFACTURE.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

DOOR ASSY - NOSE LANDING GEAR (F-16)

2. PART NUMBER:

16L060-5

3. NATIONAL STOCK NUMBER:

1560-01-283-0913WF

PREPARED BY:

1ST LT TORIN QUICK

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

06/06/2017

HILL AFB FORM 462 Page 2 of 2

10. SUGGESTED FOR THE FOLLOWING FORGINGS ARE:

A. FORGING SOURCE, CONTROL OF FORGING DIES, AND THE LOCATION OF THE DIES:

FORGING PART NUMBER: 16L025-7

FORGING DIE:

CONTROL OF FORGING DIE: ALUMINUM PRECISION PRODUCTS INC

3333 W WARNER AVENUE

SANTA ANA, CA 92704-5316

CAGE: 94790

FORGING PART NUMBER 16L-028-13

FORGING DIE:

CONTROL OF FORGING DIE: CONTNENTAL FORGE CO.

412 E El Segundo Blvd

COMPTON, CA 90222-2317

CAGE: 56333