Attachments.pdf
PDF 1 MB Posted
- Attached to
- Amendment 0001 Federal contract opportunity
- Solicitation number
- SPRHA1-23-R-0213
- Issued by
- Defense Logistics Agency Aviation
About this file
This is a combined Request for Information and Synopsis for a shimmy damper (NSN 1620-00-267-1046, P/Ns 68A450900-1015) for the F-15 aircraft. The Defense Logistics Agency Aviation is seeking information from potential sources to determine their capability and commercial availability of the item. Interested parties should contact Rocky Tello by 8 February 2023. The estimated quantity is 5 units with a delivery schedule of 12 months from award. The contracting office is DLA Aviation at Hill AFB. Incumbent sources for the item or related components include Heroux-Devtek, Goodrich, Parker Hannifin, Boeing, and Moog. The requirement is not expected to be set aside for small businesses.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA123R0213_______0001.pdf | ||
| SPRHA123R0213.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
For the best experience, open this PDF portfolio in
Acrobat X or Adobe Reader X, or later.
Get Adobe Reader Now!
http://www.adobe.com/go/reader
DD FORM 1423-1, FEB 2001
CONTRACT DATA REQUIREMENTS LIST
(1 Data Item)
PREVIOUS EDITION MAY BE USED.
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.
A. CONTRACT LINE ITEM NO. B. EXHIBIT C. CATEGORY:
TDP ________ TM _______ OTHER
D. SYSTEM/ITEM E. CONTRACT/PR NO. F. CONTRACTOR
1. DATA ITEM NO. 2. TITLE OF DATA ITEM 3. SUBTITLE
4. AUTHORITY (Data Acquisition Document No.) 5. CONTRACT REFERENCE 6. REQUIRING OFFICE
7. DD 250 REQ
8. APP CODE
9. DIST STATEMENT
REQUIRED
10. FREQUENCY
11. AS OF DATE
12. DATE OF FIRST SUBMISSION
13. DATE OF SUBSEQUENT
SUBMISSION
14. DISTRIBUTION
a. ADDRESSEE
b. COPIES
Draft Final
Reg Repro
15. TOTAL
16. REMARKS
17. PRICE GROUP
18. ESTIMATED
TOTAL PRICE
G. PREPARED BY H. DATE I. APPROVED BY J. DATE
Page of Pages
1_DATA_ITEM_NO: A001
2_TITLE_OF_DATA_ITEM: Test/Inspection Reports
3_SUBTITLE: Government Testing
4_AUTHORITY_Data_Acquisit: DI-NDTI-80809B
5_CONTRACT_REFERENCE:
6_REQUIRING_OFFICE: 417 SCMS/CL
7_DID_250_REQ: LT
8_APP_CODE:
DIST_STATEMENT: B
10_FREQUENCY: 1
11_AS_OF_DATE: Per contract reqs
12_DATE_OF_FIRST_SUBMISSI: Per contract reqs
13_DATE_OF_SUBSEQUENT_SUB:
addressee1: Preferred method of draft1:
reg1: 1 repro1:
draft13:
reg13:
repro13:
addressee14:
draft14:
reg14:
repro14:
addressee15:
draft15:
reg15:
repro15:
addressee16:
draft16:
reg16:
repro16:
addressee17:
draft17:
reg17:
repro17:
addressee18:
draft18:
reg18:
repro18:
addressee19:
draft19:
reg19:
repro19:
addressee20:
draft20:
reg20:
repro20:
addressee21:
draft21:
reg21:
repro21:
addressee22:
draft22:
reg22:
repro22:
addressee23:
draft23:
reg23:
repro23:
addressee24:
draft24:
reg24:
repro24:
addressee25:
draft25:
reg25:
repro25:
addressee26:
draft26:
reg26:
repro26:
addressee27:
draft27:
reg27:
repro27:
addressee28:
draft28:
reg28:
repro28:
addressee29:
draft29:
reg29:
repro29:
addressee30:
draft30:
reg30:
repro30:
addressee31:
draft31:
reg31:
repro31:
addressee32:
draft32:
reg32:
repro32:
addressee33:
draft33:
reg33:
repro33:
addressee34:
draft34:
reg34:
repro34:
addressee35:
draft35:
reg35:
repro35:
addressee36:
draft36:
reg36:
repro36:
addressee37:
draft37:
reg37:
repro37:
addressee38:
draft38:
reg38x:
repro38:
total_draft: 0 total_repro: 0
16_REMARKS: 1. BLOCK 4: Contractor format acceptable. Paragraph 10.2.3.3 of DI-NDTI-80809B is clarified as follows:
a. All dimensions and tolerances specified on the manufacturing data shall be listed in one column with the actual corresponding reading obtained from the inspection of the parts listed in another column.
b. Materials utilized in the manufacture of the "First Article" item shall be identified and certified along with a copy of material purchase requests as conforming to applicable data requirements.
c. Material processing, including finish requirements (plating, heat treatment, welding, inspecting, anodize, painting, etc.) utilized in the manufacture of the "First Article" item shall be identified and certified as conforming to applicable requirements. A copy of the purchase order certifying the process accomplished at other than contractor facility shall be included.
d. Other requirements as called out with the Technical Data Package.
2. BLOCK 9: Distribution authorized to U.S. Government Agencies only, test and evaluation, 21 Jun 2021. Other requests for this document shall be referred to 417 SCMS.
3. BLOCKS 10, 11, 12, and 13: Report to assist in the "First Article" testing by the Air Force shall be submitted concurrently with the "First Article" item.
FOB: DESTINATION
INSPECTION/ACCEPTANCE: DESTINATION
17_PRICE_GROUP: NSP
ESTIMATED_TOTAL_PRICE: 0
G_PREPARED_BY: Lori Grygier Lead IM, 417 SCMS/GUMD
H_DATE: 20210621
J_DATE: 20210621
Page: 1 reg38t: 1
A_CONTRACT_LINE_ITEM_NO:
B_EXHIBIT: A
TDP:
TM:
OTHER:
DSYSTEMITEM: First Article
E_CONTRACTPR_NO: FD20202300213
FCONTRACTOR:
of_pages: 1
Reset:
addressee13:
addressee12:
addressee11:
addressee10: 84056-5713 addressee9: Hill AFB, UT addressee8: Non Accountable Bay addressee7: Bldg. 849 Attn:
addressee6: 809 MXSS/MXDEB addressee5: FB2029 addressee4: container:
addressee3: report in First Article addressee2: shipping to include test
2017-03-08T08:31:48-0700
MARTIN.BRAD.H.1256609564
ENGINEERING DATA LIST
DATE:
16 JUL 2020
REVISION: 13 *HISTORY*
CAGE:
76301
PAGE:
NSN:
1620002671046
DATA TECH:
Smith, Cordell D
END ITEM:
F-15 LANDING GEAR
ORGANIZATION/OFFICE SYMBOL:
429 SCMS GUMACB/
MANUFACTURER NAME:
THE BOEING COMPANY
REFERENCE NUMBER:
68A450900-1015
NOUN:
DAMPER,SHIMMY
LINE/
SUB CAGE
ENG DRAWING NUM/ ACCOMP
DOC NUM REV
NR
SHEETS
FURN
CODE
DIST
CODE NOUN REMARKS
L 76301 68A450900 G S D DAMPER, SHIMMY - NOSE
WHEEL STEERING
S 98747 13C0393-H S D ENGINEERING ORDER
S 76301 29EO S D ENGINEERING ORDER
L 76301 PL68A450900 G S D PARTS LIST
S 98747 13C0394-H S D ENGINEERING ORDER
S 98747 14C0580-H S D ENGINEERING ORDER
S 98747 18A6534-H S D AESO
S 98747 20A1886-H S D AESO
L 76301 68A450901 C S D HOUSING - SHIMMY DAMPER,
NOSE WHEEL STEERING
S 98747 13C0395-H S D ENGINEERING ORDER
S 98747 20A1887-H S D AESO
L 76301 PL68A450901 C S D PARTS LIST
S 98747 13C0396-H S D ENGINEERING ORDER
S 98747 20A1888-H S D AESO
L 76301 68B458014 A S D RESRICTOR UNIT, FLUID
FLOW-NOSE WHEEL STEERING
S 76301 A150042 S D ENGINEERING ORDER
L 76301 PL68B458014 A S D PARTS LIST
S 98747 20A1890-H S D AESO
L 76301 68A450903 B S D PISTON - NOSE WHEEL
STEERING
S 98747 16A6138-H S D AESO
L 76301 PL68A450903 B S D PARTS LIST
S 98747 16A6075-H S D AESO
L 76301 68A450904 S D RETAINER, PISTON- NOSE
WHEEL STREERING
L 76301 PL68A450904 S D PARTS LIST
S 98747 17A6362-H S D AESO
L 76301 68A450905 B S D RING,EXTERNALLY
THREADED-NOSE WHEEL STEE
L 76301 PL68A450905 B S D PARTS LIST
C - CLASSIFIED DOCUMENT.
S - FURNISHED WITH SOLICITATION.
M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH
CONTRACT AWARD.
X - DATA SUPPLIED (NOT IN JEDMICS).
R - FURNISHED BY PCO UPON REQUEST.
P - PARTIAL DOCUMENT FURNISHED.
V - VENDOR DRAWING; (NOT PROVIDED).
G - GOV'T DOCUMENT.
O - OTHERS, CONTRACTOR MUST ACQUIRE.
A- DATA NOT AVAILABLE.
FURNISHED METHOD CODE LEGEND:
Page 1 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 20A1891-H S D AESO
L 76301 68A450906 A S D COLLAR, RETAINING NOSE
L 76301 PL68A450906 A S D PARTS LIST
S 98747 20A1892-H S D AESO
L 76301 68A450907 S D ARM FEEDBACK,SPLINED
S 98747 17A6042-H AESO
L 76301 PL68A450907 S D PARTS LIST
S 98747 17A6043-H S D AESO
L 76301 68A450908 B S D SHAFT,FEEDBACK-NOSE
L 76301 PL68A450908 B S D PARTS LIST
S 98747 20A1893-H S D AESO
L 76301 68A450909 A S D BUSHING, FEEDBACK SHAFT -
L 76301 PL68A450909 A S D PARTS LIST
S 98747 20A1894-H S D AESO
L 76301 68A450910 A S D RING, EXTERNALLY
THREADED - RETAINER,
FEEDBACK, NO
L 76301 PL68A450910 A S D PARTS LIST
S 98747 20A1895-H S D AESO
L 76301 68A450911 S D WASHER, FLAT-TEFLON, NOSE
L 76301 PL68A450911 S D PARTS LIST
S 98747 20A1896-H S D AESO
L 76301 68A450912 A S D TURNBUCKLE BODY-
FEEDBACK, NOSE WHEEL
L 76301 PL68A450912 A S D PARTS LIST
S 98747 20A1897-H S D AESO
L 76301 68A450913 S D ARM, FEEDBACK- NOSE
Page 2 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 20A1898-H S D AESO
L 76301 PL68A450913 S D PARTS LIST
S 98747 20A1899-H S D AESO
L 76301 68A450916 B S D PIN, PIVOT - NOSE WHEEL
L 76301 PL68A450916 B S D PARTS LIST
S 98747 20A1900-H S D AESO
L 76301 68A450917 S D LINK,SUMMING-RATIO
CHANGER NOSE WHEEL
S 76301 1EO S D ENGINEERING ORDER
L 76301 PL68A450917 S D PARTS LIST
S 98747 18A6418-H S D AESO
L 76301 68A450918 S D SPACER, STEPPED - NOSE
L 76301 PL68A450918 S D PARTS LIST
S 98747 20A1901-H S D AESO
L 76301 68A450919 A S D RETAINER, PACKING - RATIO
CHANGER, NOSE WHEEL STEE
L 76301 PL68A450919 S D PARTS LIST
S 98747 20A1902-H S D AESO
L 76301 68A450920 A S D SHAFT - SHOULDERED INPUT,
L 76301 PL68A450920 A S D PARTS LIST
S 98747 20A1903-H S D AESO
L 76301 68A450921 B S D HOUSING ASSY INPUT - NOSE
S 98747 20A1904-H S D AESO
L 76301 PL68A450921 B S D PARTS LIST
S 98747 20A1905-H S D AESO
L 76301 68A450923 B S D CAM ASSY - NOSE WHEEL
L 76301 PL68A450923 B S D PARTS LIST
Page 3 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 19A6749-H S D AESO
L 76301 68A450924 B S D HOUSING, CAM - NOSE WHEEL
L 76301 PL68A450924 B S D PARTS LIST
S 98747 19A6750-H S D AESO
L 76301 68A450925 A S D CRANK, CAM - NOSE WHEEL
L 76301 PL68A450925 A S D PARTS LIST
S 98747 19A6751-H S D AESO
L 76301 68A450926 D S D CAM - NOSE WHEEL STEERING
L 76301 PL68A450926 D S D PARTS LIST
S 98747 19A6752-H S D AESO
L 76301 68A450927 A S D PIN, DRIVE - NOSE WHEEL
L 76301 PL68A450927 A S D PARTS LIST
S 98747 19A6753-H S D AESO
L 76301 68A450928 B S D WASHER, RECESSED - NOSE
L 76301 PL68A450928 B S D PARTS LIST
S 98747 19A6754-H S D AESO
L 76301 68A450929 A S D WASHER, SLOTTED - NOSE
L 76301 PL68A450929 A S D PARTS LIST
S 98747 19A6755-H S D AESO
L 76301 68A450992 S D SPRING, CAM NOSE WHEEL
L 76301 PL68A450992 S D PARTS LIST
S 98747 19A6756-H S D AESO
L 76301 68B458016 A S D BEARING, BALL, ANNULAR -
L 76301 PL68B458016 A S D PARTS LIST
L 76301 68A450932 S D PIN,LOCATING NOSE WHEEL
Page 4 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
L 76301 PL68A450932 S D PARTS LIST
S 98747 20A1906-H S D AESO
L 76301 68A450933 A S D RETAINER, SEAL, RETURN -
L 76301 PL68A450933 A S D PARTS LIST
S 98747 20A1907-H S D AESO
L 76301 68A450934 S D LINK, SUMMING-INPUT-
OUTPUT, NOSE WHEEL
L 76301 PL68A450934 S D PARTS LIST
S 98747 20A1908-H S D AESO
L 76301 68A450935 C S D SLEEVE & PLUNGER
ASSY,CONTROL VALVE-NOSE
L 76301 PL68A450935 C S D PARTS LIST
S 98747 20A1909-H S D AESO
L 76301 68A450936 S D SEAT,SPRING,VALVE-NOSE
L 76301 PL68A450936 S D PARTS LIST
S 98747 20A1910-H S D AESO
L 76301 68A450937 A S D PACKING NUT - VALVE, NOSE
L 76301 PL68A450937 A S D PARTS LIST
S 98747 20A1911-H S D AESO
L 76301 68A450938 S D RETAINER, VALVE, CONTROL-
NOSE WHEEL
L 76301 PL68A450938 S D PARTS LIST
S 98747 20A1912-H S D AESO
L 76301 68A450939 S D SEAT-SPRING,VALVE,INNER
NOSE WHEEL STEER
L 76301 PL68A450939 S D PARTS LIST
S 76301 20A1913-H S D AESO
L 76301 68A450940 S D RETAINER-THREADED,ANTI-
CAVITATION VALVE
L 76301 PL68A450940 S D PARTS LIST
Page 5 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 20A1914-H S D AESO
L 76301 68A450941 A S D PACKING NUT -
COMPENSATOR VALVE - NOSE
WHEEL STEER
L 76301 PL68A450941 A S D PARTS LIST
S 98747 20A1915-H S D AESO
L 76301 68A450942 S C RETAINER, SPRING - NOSE
L 76301 PL68A450942 S C PARTS LIST
S 98747 20A1916-H S C AESO
L 76301 68A450943 A S D PISTON,COMPENSATOR-NOSE
L 76301 PL68A450943 A S D PARTS LIST
S 98747 20A1917-H S D AESO
L 76301 68A450944 S D RETAINER, SPRING,POPPET-
NOSE WHEEL STRG
L 76301 PL68A450944 S D PARTS LIST
S 98747 20A1668-H S D AESO
L 76301 68A450945 S D POPPET COMPENSATOR, NOSE
L 76301 PL68A450945 S D PARTS LIST
S 98747 20A1918-H S D AESO
L 76301 68A450946 B S D VALVE ASSEMBLY,
COMBINATION- NOSE WHEEL
L 76301 PL68A450946 B S D PARTS LIST
S 98747 18A6372-H S D AESO
L 76301 68A450922 A S D SEAT, SPRING-VALVE, RELIEF,
L 76301 PL68A450922 A S D PARTS LIST
S 98747 18A6373-H S D AESO
L 76301 68A450947 S D GUIDE,SPRING-NOSE WHEEL
L 76301 PL68A450947 S D PARTS LIST
S 98747 18A6374-H S D AESO
Page 6 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
L 76301 68A450948 A S D CYLINDER-TIMED DELAY
L 76301 PL68A450948 A S D PARTS LIST
S 98747 18A6375-H S D AESO
L 76301 68A450949 S D RETAINER - COMBINATION
VALVE, NOSE WHEEL
L 76301 PL68A450949 S D PARTS LIST
S 98747 18A6376-H S D AESO
L 76301 68A450950 B S D VALVE, RELIEF AND BYPASS-
L 76301 PL68A450950 B S D PARTS LIST
S 98747 18A6377-H S D AESO
L 76301 68A450951 S D PISTON-TIMED DELAY, NOSE
L 76301 PL68A450951 S D PARTS LIST
S 98747 18A6378-H S D AESO
L 76301 68A450952 B S D VALVE- TIMED DELAY, NOSE
L 76301 PL68A450952 B S D PARTS LIST
S 98747 18A6379-H S D AESO
L 76301 68A450953 A S D SEAT, SPRING-TIMED DELAY,
L 76301 PL68A450953 A S D PARTS LIST
S 98747 18A6380-H S D AESO
L 76301 68A450954 A S D SPRING, HELICAL
COMPRESSION-RELIEF VALVE,
NOSE WHE
L 76301 PL68A450954 A S D PARST LIST
S 98747 18A6381-H S D AESO
L 76301 68A450955 A S D SPRING, HELICAL
COMPRESSION-SPOOL
RETURN, NOSE WHE
L 76301 PL68A450955 A S D PARTS LIST
Page 7 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 18A6382-H S D AESO
L 76301 68A900017 C S D NOSE WHEEL STEERING
SHIMMY DAMPER
L 76301 68A450957 A S D PACKING NUT-
SOLENOID,NOSE WHEEL
L 76301 PL68A450957 A S D PARTS LIST
S 98747 20A1919-H S D AESO
L 76301 68A450958 A S D UNIVERSAL ASSY,MALE-NOSE
L 76301 PL68A450958 A S D PARTS LIST
S 98747 19A6311-H S D AESO
L 76301 68A450960 A S D YOKE ASSY DRIVE, INPUT-
L 76301 PL68A450960 A S D PARTS LIST
L 76301 68A450961 A S D BLOCK, INPUT, SPLINED- NOSE
WHEEL STRG
L 76301 PL68A450961 A S D PARTS LIST
S 98747 19A6313-H S D AESO
L 76301 68A450962 B S D BLOCK, BEARING-NOSE
S 98747 18C0752-H S D AESO
L 76301 PL68A450962 B S D PARTS LIST
S 98747 18C0753-H S D AESO
L 76301 68A450964 A S D PIN, SHEAR, HOLLOW - NOSE
L 76301 PL68A450964 A S D PARTS LIST
S 98747 17A6135-H S D AESO
L 76301 68A450966 A S D YOKE ASSY,MALE INPUT
DRIVE-NOSE WHEEL
L 76301 PL68A450966 A S D PARTS LIST
L 76301 68A450968 A S D SPIDER, UNIVERSAL JOINT-
L 76301 PL68A450968 A S D PARTS LIST
Page 8 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 18A6529-H S D AESO
L 76301 68A450969 S D SPACER, BEARING-NOSE
L 76301 PL68A450969 S D PARTS LIST
S 98747 18A6530-H S D AESO
L 76301 68A450976 B S D SHAFT-
DRIVE,INPUT,MALE,NOSE
L 76301 PL68A450976 B S D PARTS LIST
S 98747 19A6315-H S D AESO
L 76301 68A450959 A S D WASHER, LOCKING, ROD END -
L 76301 PL68A450959 A S D PARTS LIST
S 98747 18A6646-H S D AESO
L 76301 68A450963 A S D PIN, STRAIGHT, HEADLESS -
L 76301 PL68A450963 A S D PARTS LIST
S 98747 14C0454-H S D ENGINEERING ORDER
S 98747 20A1920-H S D AESO
L 76301 68A450970 S D SPRING,COMPENSATOR-NOSE
L 76301 PL68A450970 S D PARTS LIST
S 98747 20A1921-H S D AESO
L 76301 68A450971 S D SPRING, POPPET- NOSE WHEEL
L 76301 PL68A450971 S D PARTS LIST
S 98747 20A1922-H S D AESO
L 76301 68A450972 S D SPRING, SERVO, INNER-NOSE
L 76301 PL68A450972 S D PARTS LIST
S 98747 17A6675-H S D AESO
L 76301 68A450973 S D SPRING, SERVO,OUTER-NOSE
L 76301 PL68A450973 S D PARTS LIST
Page 9 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
S 98747 20A1923-H S D AESO
L 76301 68A450989 A S D BRACKET, RIGGING- NOSE
L 76301 PL68A450989 A S D PARTS LIST
S 98747 20A1924-H S D AESO
L 76301 68A450995 C S D PISTON, RATIO CHANGER-
NOSE WHL STRG
L 76301 PL68A450995 C S D PARTS LIST
S 98747 20A1925-H S D AESO
L 76301 68A450996 A S D BOLT, SPECIAL NOSE WHEEL
L 76301 PL68A450996 A S D PARTS LIST
S 98747 18A6578-H S D AESO
L 76301 68A890031 C S D PLATE, IDENTIFICATION, NOSE
S 76301 3EO S D ENGINEERING ORDER
S 76301 4EO S D ENGINEERING ORDER
L 76301 PL68A890031 C S D PARTS LIST
S 98747 20A1926-H S D AESO
L 76301 68B458005 B S D BEARING, PLAIN ROD END
L 76301 PL68B458005 B S D PARTS LIST
S 98747 20A1927-H S D AESO
L 76301 68B458007 B S D VALVE, CHECK-ANTI-
CAVITATION, NOSE WHEEL
L 76301 PL68B458007 B S D PARTS LIST
S 98747 19A1120-H S D AESO
L 76301 68B458008 S D SET-SEAL, PISTON RING AND
EXPANDER-NOSE WHEEL STEE
S 76301 1EO S D ENGINEERING ORDER
L 76301 PL68B458008 S D PARTS LIST
S 98747 20A1928-H S D AESO
Page 10 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
L 76301 68B458009 A S D PACKING, PERFORMED-CAP
STRIP, OD SEAL, DYNAMIC,
NW
S 76301 A397843 S D ENGINEERING ORDER
L 76301 PL68B458009 A S D PARTS LIST
L 76301 68B458010 A S D PACKING, PREFORMED-CAP
STRIP, ID SEAL, DYNAMIC, NW
L 76301 PL68B458010 A S D PARTS LIST
L 76301 68B458011 A S D VALVE, SOLENOID -
HYDRAULIC, NOSE WHEEL
L 76301 PL68B458011 A S D PARTS LIST
S 98747 20A1929-H S D AESO
L 76301 68B458012 A S D PACKING, PREFORMED-CAP
STRIP, OD SEAL, STATIC, NWS
L 76301 PL68B458012 A S D PARTS LIST
L 76301 68B458013 B S D FILTER, ELEMENT, FLUID,
PRESSURE-INLET, NOSE
WHEEL
L 76301 PL68B458013 B S D PARTS LIST
S 98747 20A1935-H S D AESO
L 76301 68A450990 A S D BUSHING, SLEEVE - INPUT
HOUSING, NOSE WHEEL
STEERI
L 76301 PL68A450990 A S D PARTS LIST
S 98747 20A1930-H S D AESO
L 76301 68A900018 S D ACCEPTANCE TEST
PROCEDURE BENCH, NOSE
WHEEL STEERI
L 76301 68A900029 M S D FASTEREN SUBSTITUTION
L 76301 4M65 AA S A WASHER, FLAT-SHIM STOCK,
SPECIAL
L 76301 6M191 A S A PLATE, IDENTIFICATION PER
MIL-STD-130 AND/OR AFSCM
Page 11 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
L 76301 6M192 A S D PLATE, IDENTIFICATION-PER
MIL-STD-130
L 76301 9M188 D S D RING, RETAINING - INTERNAL,
SPIROLX
L 76301 PS12040 AA S D CLEANING, ABRASIVE
L 76301 PS14016 L S D PANELS, ILLUMINATED,
PLASTIC AS7788
L 76301 PS14018 N S D FABRICATION OF METAL
NAMEPLATES (INCLUDING
FOIL TY
L 76301 PS14180 H S D MACHINING, ELECTRICAL
DISCHARGE
L 76301 PS17004 Y S D SAFETYING PRACTICES
L 76301 PS17100 AP S D WIRING, ELECTRICAL,
AIRCRAFT, FABRICATION AND
INST
L 76301 PS17023 P S D ASSEMBLE, TEST AND STORE
L 76301 PS17042 E S D PLUGS, PIN TYPE:
INSTALLATION OF
L 76301 PS17149 G S D ADAPTERS, ROSAN, FLUID
SYSTEM
L 76301 PS17169 AF S D BONDING AND GROUNDING;
ELECTRICAL
L 76301 PS17204.1 A S C EMBEDDING OF WIRE WOUND
TOROID
L 76301 PS19000 W S D INSTALL FASTENERS
L 76301 PS19260 G S D INSERTS, HELICAL COIL,
INSTALLATION OF
L 76301 PS20018 F S D SURFACE FINISH
REQUIREMENTS FOR ROUND
HOLES
L 76301 PS23041 U S D MACHINED PARTS, RQMTS &
ACCPT. CRITERIA
Smith, Cordell D 16 JUL 2020
USE REV U, V IS PROPRIETARY
NAME: DATE:
L 76301 PS23600 AU S D AGE/SHELF LIFE CONTROL
REQUIREMENTS
Page 12 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
L 76301 ST4M127 C S D BEARING, SLEEVE - FLANGED,
TFE LINED, FOR USE UP T
L 76301 ST7M141 F S D PLUG SET - PERMANENT,
EXPANSION TYPE
L 76301 ST4M148 H S A WASHER, SPRING TENSION -
BELLEVILLE
L 76301 ST4M152 C S D BEARING, ROLLER, ROD END,
EXTERNAL THREAD, SELF AL
L 76301 ST4M155 D S A BEARING,BALL,ANNULAR-
FLANGED
L 76301 ST7M200 H S D ADAPTER, STRAIGHT TUBE TO
BOSS-FLUID
L 76301 ST7M293 B S D CAP, PROTECTIVE, DUST AND
MOISTURE SEAL - DYNATUBE
L 76301 ST3M404 T S A NUT - PLAIN, SLOTTED
HEXAGON, SHEAR
L 98747 200827953 A S D LABEL UNIQUE
IDENTIFICATION (UID)
L 98747 201416605 C S D LANDING GEAR
REQUIREMENTS DOC.
(ENGINEERING NOTES)
STANDARD ENGINEERING TEXT
Smith, Cordell D 17 JUL 2020
RELEASE OF THIS DATA TO A FOREIGN OWNED, CONTROLLED OR INFLUENCED COMPANY IS DEPENDENT UPON THE APPROVAL OF THE FOREIGN DISCLOSURE OFFICE.NOTE TO ALL SUPPLY CHAIN PERSONNEL: THE ENGINEERING NOTES ARE PROVIDED ON AIR FORCE DRAWING 201416605, CAGE CODE 98747, AND ADVANCED ENGINEERING SUPPLEMENTAL ORDER(S) (AESO'S). THE HILL AFB FORM 462, ENGINEERING DATA REQUIREMENTS (ATTACHMENT A / ENGINEERING INSTRUCTIONS) ARE NO LONGER UTILIZED FOR LANDING GEAR AND WILL NOT BE PROVIDED. ALL PREVIOUS LANDING GEAR VERSIONS OF THE HILL AFB FORM 462 FOR THIS NATIONAL STOCK NUMBER (NSN) HAVE BEEN SUPERSEDED AND WILL NOT BE UTILIZED FOR MANUFACTURE OF THIS
COMPONENT/ASSEMBLY.
NAME: DATE:
Page 13 of 13EDL Version 13Generated by PRPS using Jasper Reports on 13 Dec 2022
Statement of Work March 2021
PRESERVATION, PACKAGING & MARKING REQUIREMENTS
The contractor shall develop, implement and maintain the preservation, packaging and packing of all items to be delivered under the terms of this contract. Packaging procedures will be established in accordance with AFMCI 24-201, specifically Paragraph 3.7 and MIL-STD-2073-1, Standard Practice for Military Packaging, Packaging requirements are identified in the AFMC Form 158, Packaging Requirements submitted by the responsible packaging specialist. All “markings and labeling” of shipments shall conform to MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage. The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
(ISPM 15) REQUIREMENTS
The contractor shall use the wood packaging material regulation for international trade which describes Phytosanitary (including treatments) that have been approved for wood packaging material and provides for the approval of new or revised treatments. Use the latest revision of (ISPM 15), and the following statement complies with the United Nations-implemented restrictions on wood packaging material (WPM).
“This requirement is specifically concerned with invasive species such as pinewood nematode. WPM is defined as wood pallets, skids, load boards, pallet collars, wooden boxes, reels, dunnage, crates, frames, and cleats. The statement below cites the requirements in detail and covers lumber for building containers and pallets used for deliveries resulting in worldwide shipments (direct vendor deliveries, Air Logistics complex (ALC), Container Consolidation Points (CCP), Aerial Ports, Water Ports, or other DoD installations).
ELECTROSTATIC MATERIAL (When Applicable) The Contractor shall apply provisions of MIL-STD-2073-1, when identifying all solid-state devices and modules containing diodes, translators, integrated circuits and/or other microelectronic components sensitive to electrostatic forces. All such items shall be packaged IAW MIL-STD-2073-1 in conjunction with ANS/ESD S20.20, using electrostatic free barrier materials and shall clearly bear “Electrostatic Sensitive Device” labels IAW MIL-STD-129, Department of Defense Standard Practice Military Marking for Shipment and Storage.
PALLETIZED UNIT LOADS
The Contractor shall apply provisions and methods of MIL-STD-147, Palletized Unit Loads to contracts requiring the preparation and shipment of bonded palletized unit loads for DoD facilities when applicable.
SPECIALIZED SHIPPING CONTAINERS
The contractor shall apply provisions of MIL-STD-648, Department of Defense Design Criteria Standard, Specialized Shipping Containers. This standard establishes general design guidelines and associated tests for specialized shipping containers used by the Department of Defense. Definitive requirements for specific containers will be defined by the individual specification, acquisition, or task order. This standard is intended to be used as the basic reference document in all specifications and standards prescribing performance requirements to be applied to a specialized shipping container. Compliance with this intent is expected through normal application of the specification or standard preparation and revision processes.
Statement of Work (Cont)
HAZARDOUS MATERIALS (When Applicable) The contractor shall ensure Hazardous shipments comply with International Civil Aviation Organization (ICAO), U.S. Code of Federal Regulations (CFR) Title 49, International Air Transport Association (IATA) Dangerous Goods Regulation, International Maritime Dangerous Goods Code (IMDG, Annex 1), and AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments. Packaging shall meet “DOT specification or a United Nation (UN) specification ” manufactured in accordance with 49 CFR, Part 178 and the final packages assembled IAW 49 CFR, Parts 100-185 as applicable. A Competent Authority Approval (CAA) shall be acquired from the responsible Associate Administrator or other designated Department official to perform a function requiring prior consent under the Hazardous Material Regulation (HMR). Package(s) shall be marked IAW MIL-STD-129, DoD Standard Practice, Military Marking for Shipment and Storage.
The contractor shall affix a completed DD Form 1574, Serviceable Tag-Materiel or DD Form 1574-1, Serviceable Label- Materiel to each unit pack or intermediate container and prime outer container(s). The tag or label will indicate the condition(s) of the materiel and to identify the individual article or contents, bundle, container to which they are securely attached. If a symbol is used to represent the manufacturer or the approval agency certifying compliance with 49 CFR 178, subparts L and M, the symbol must be registered with the U.S. Department of Transportation. A copy of the Contractor’s Test Report and signed certification that the package configuration meets both CFR and UN requirements shall be made available to the procuring contract office, as required, prior to acceptance or shipment of any portion of the product IAW Contract Data Requirements List (CDRL DI-PACK-81059B) (Reference AFMC Form 158). Safety Data Sheets (SDS) are required for known hazardous items and applicable items shown in FED-STD-313, Tables I and II. The SDS shall have any applicable identification number, such as National Stock Number or Special Item Number. A copy of the SDS shall be mailed or e-mailed no later than five (5) days prior to contractual delivery of items:
FAR clause 52.223-3, Hazardous Material Identification and Material Safety Data
SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM
(SPIRES)
Contractors may request the use of SPIRES website to view item packaging requirements or search for Special Packaging Instruction drawings via the following website: https://spires.wpafb.af.mil/
REUSABLE CONTAINERS
The contractor shall safeguard all received reusable shipping containers that meet the requirements of the AFMC Form 158 and are suitable for return shipment of serviceable assets. The contractor shall dispose of and replace unserviceable containers with new containers that meet requirements of the AFMC Form 158.
Contact the Product Support Manager and Administering Contracting Office (ACO) for disposition instructions and replacement when Long Life Reusable Container(s) are received in an unserviceable condition.
https://spires.wpafb.af.mil/
REPORTING DISCREPANCIES
The contractor shall use Web Supply Discrepancy Report (WebSDR) to submit/reply to a Supply Discrepancy Report (SDR), when improperly packed assets are received/shipped in other than the contracted packaging requirements (coded data or Special Packaging Instructions (SPI) drawings) from Department of Defense (DoD) components or contractor activities. The contractor shall request a WebSDR account via the following website: https://www.transactionservices.dla.mil/daashome/homepage.asp
(See Defense Logistics Management (DLM) 4000.25-M, Volume 2, Supply Standard and Procedures, Chapter 17, Supply Discrepancy Reporting) http://www.dla.mil/HQ/InformationOperations/DLMS/
Exceptions when no damage has occurred are as follows:
- Items packaged before the current SPIdate.
- An alternate pack may be used, provided the prime Air Force Sustainment Complex, Packaging Office at the Air Logistics Complex (ALC) approves and issues a waiver, deviation number, which would be annotated on the exterior container on the lower right hand portion of the identification side of thecontainer.
- In accordance with Technical Order (TO) 00-85B-3, How to Package Air Force Spares, the contractor may substitute the next larger size fast pack, of the type I or type II to ship transportation priorities 1 and 2 shipments as long as there is no decrease in any of the container dimensions without the requirement of a waiver deviation. TO 00- 85B-3, para 4.2 can be accessed via the website:
- https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf
ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions The contractor shall use the ASSIST website to access specification, standards, data item descriptions documents listed in this contract solicitation:
FAR 52-211-2 Availability of Specifications, Standards, and Data Item Descriptions listed in the Acquisition Streamlining and Standardization Information System https://quicksearch.dla.mil/
AFSC
406 SCMS/GULAA
Attn:
DSN:
COMM:
E-mail:
https://www.transactionservices.dla.mil/daashome/homepage.asp http://www.dla.mil/HQ/InformationOperations/DLMS/ https://www.tinker.af.mil/Portals/106/Documents/Technical%20Orders/AFD-082416-00-85B-3.pdf https://quicksearch.dla.mil/%23/
APPLICABLE GOVERNMENT PACKAGING DOCUMENTS
NOTE: UTILIZE THE MOST RECENT REVISION
AFI 24-602V2_AFGM2018-01, Preparation and Movement of Air Force Cargo
AFMAN 24-604, Preparing Hazardous Materials for Military Air Shipments
DLMS 4000.25, Defense Logistics Management Systems, Volume 2, Change 10, Supply Standards and Procedures, Chapter 17, Supply Discrepancy Reporting
DOT Title 29, Occupational Safety and Health Administration, Labor
DOT Title 49, Code of Federal Regulations (49 CFR), Transportation
International Civil Aviation Organization (ICAO) Technical Instructions
International Air Transport Association (IATA) Dangerous Goods Regulation
International Maritime Dangerous Goods (IMDG) Code
ISPM 15, International Standard Phytosanitary Measure Note: Marking Requirements may be found in the American Lumber Standards Committee, Incorporated Wood Packaging Material Enforcement Regulations dated November 07, 2014 and ISPM 15.
MIL-STD-2073-1E, Change 4, Standard Practice, for Military Packaging
MIL-STD-129R, Change 1, Department of Defense Standard Practice Military Marking for Shipment and Storage
MIL-STD-648E, Department of Defense Design Criteria Standard, Specialized Shipping Containers
MIL-STD-147E, Change 1, Palletized Unit Loads
MIL-HDBK-773B, Electrostatic Discharge Protective Packaging
TO 00-85B-3, How to Package Air Force Spares
FED-STD-313E, Federal Standard: Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities
Statement of Work (Cont)
HAZARDOUS MATERIALS (When Applicable)
SPECIAL PACKAGING INSTRUCTIONS RETRIEVAL & EXCHANGE SYSTEM (SPIRES)
REUSABLE CONTAINERS
Statement of Work (Cont)
REPORTING DISCREPANCIES
Exceptions when no damage has occurred are as follows:
ASSIST Documents for Specifications Listed in the GSA Index of Federal Specifications, Standards and Commercial Item Descriptions
AFSC
Statement of Work (Cont)
DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO DEPARTMENT OF DEFENSE AND U.S. DOD CONTRACTORS ONLY, ADMINISTRATIVE OR OPERATIONAL USE, 30 AUGUST 2018. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO 406
SCMS/GULAA, (PACKAGING DIVISION), HILL AFB, UTAH 84056.
DESTRUCTION NOTICE: FOLLOW THE PROCEDURES IN DOD 5220.22-M, NATIONAL INDUSTRIAL SECURITY PROGRAM OPERATING MANUAL (NISPOM), SECTION 5-705, OR DOD 5200.1-R, INFORMATION SECURITY PROGRAM, CHAPTER VI. FOR UNCLASSIFIED, LIMITED DOCUMENTS, DESTROY BY ANY METHOD THAT WILL PREVENT DISCLOSURE OF CONTENTS OR RECONSTRUCTION OF THE DOCUMENT.
AutoCAD SHX Text
20 LBS
ITEM WT.
2169 MOD
MARCH 87
DD
FORM
LEVEL B:
LEVEL A:
CLOSURE
IAW: ASTM D1974
IAW: ASTM D6251
COMPUTER GENERATED
SPI NO. F00-267-1046
CODE ID
98747
DESIGN FRAGILITY G
SPEC STYLE TYPE CL VRTY GR TR
AS SPECIFIED BELOW AND BILL OF MATERIALS
ILL.
NATIONAL STOCK NO.
PART OR DRAWING NO.
CURRENT
SPECIAL MARKINGS:
A) SPI NO. F00-267-1046
PRESERVATIVE: N/A
UNSERVICEABLE METHOD: 10
CLEANING & DRYING: IAW MIL-STD-2073
MILITARY PRESERVATION IAW MIL-STD-2073
B) REUSABLE CONTAINER & DUNNAGE DO NOT DESTROY.
MARKING IAW MIL-STD-129
QUP
ICQ
CNTR O.D.
ITEM DIM
CNTR I.D.
GROSS WT LBS
ITEM NOMENCLATURE
PACKING
LEVEL
GROSS CU FT
B
A
ASTM D5118
ASTM D6251
REV
DATE
ORIGINAL
CHK.
AUTH.
P.S.
SPECIAL PACKAGING INSTRUCTION
18 3/8
20 3/4
20 3/4
18 3/8
14 5/8
10 3/4
7 3/4
LENGTH WIDTH DEPTH
18 3/4
18 3/4
LEVEL A LEVEL B
3.239
III
2.100
SPI NO. (TPO)
SHEET 1 OF 5
D. NAY W. MONSON K. RESTORFF N. CORONADO
1620-00-267-1046
DAMPER, SHIMMY
F00-267-1046
V3c
RSC
N
72298
REVISIONS
DESCRIPTION
LTR
DATE
MARK THE SPI NUMBER ON THE IDENTIFICATION SIDE OF CONTAINER.
SERVICEABLE METHOD: 10
N
ADDEED DISTRIBUTION STATEMENT AND DESTRUCTION NOTICE, CHANGED DIMENSIONS
18256
REQD
P/N
QTY
SIZE: (INCHES UNLESS SPECIFIED) TOLERANCES ON FRAC. ± , 18, DECIMAL ± .10, ANGLES ± 1°
DESCRIPTION
NOMENCLATURE OR
SPECIFICATION
MATERIAL
A/R 1 1 1 1 1
TAPE WRAP SLEEVE CUSHION PAD STIFFENER PAD
3 X AS REQUIRED 46 X 30 37 5/8 X 5 1/2 X 1/4 7 3/4 X 6 X 2 17 7/8 X 17 7/8 X 1/2 17 7/8 X 17 7/8 X 4
ASTM D5486 TYPE I OR V A-A-3174 TYPE I, CLASS 1, GRADE A, FINISH 1 ASTM D4727 CF, DOM, DW, GR. 200 A-A-59136 CLASS 1, GRADE A ASTM D4727 CF, DOM, TW, GRADE 200 MIL-PRF-26514 TYPE I, CLASS 2, GRADE B
-6 -5 -4 -3 -2 -1
C
2169C MOD
SHEET 2 OF 5
CAUTION NOTICES
NOTICE 1: ASSETS PACKAGED IN ACCORDANCE WITH PREVIOUS EDITIONS OF THIS SPI DO NOT REQUIRE
REPACKAGING IF THE INTEGRITY OF THE SPI IS MAINTAINED.
NOTICE 2: SEE SPIRES FOR A COMPLETE LISTING OF NSN's ASSIGNED TO THIS SPI.
NOTICE 3: PACKAGING MATERIAL MAY BE SUBSTITUTED IF IT MEETS THE REQUIREMENTS OF MIL-STD-2073, PROVIDES EQUAL OR BETTER PROTECTION AND THERE IS NO INCREASED COST TO THE GOVERNMENT.
NOTICE 4: FOR LEVEL A PACKAGING REQUIREMENTS, LEVEL B PACKS SHALL BE OVERBOXED IN A LEVEL A SPECIFIED
CONTAINER SHOWN ON PAGE 1 UNDER PACKAGING LEVEL A.
NOTICE 5: OVERSEAS AND FMS PACKAGING MUST MEET THE REQUIREMENTS OF LEVEL A PACKAGING.
NOTES
1. PLACE PAD, REF.-1, INTO BOTTOM OF CONTAINER.
2. PLACE STIFFENER, REF.-2, ON TOP OF PAD.
3. PLACE CUSHION PAD, REF.-3, DOWN INTO CUTOUT.
4. WRAP ITEM IN REF.-5 AND SECURE IN PLACE WITH TAPE REF.-6.
5. PLACE WRAPPED ITEM INTO CONTAINER ON TOP OF REF.-1, -2, AND -3.
6. SECURE ENDS OF SLEEVE TOGETHER WITH TAPE, REF.-6, PLACING OVER ITEM.
INTERNATIONAL STANDARDS FOR PHYTOSANITARY MEASURES
REVISION OF ISPM NO. 15
REVISION OF WOOD PACKAGING MATERIAL FOR INTERNATIONAL TRADE
THE FOLLOWING STATEMENT IS IN COMPLIANCE WITH THE UNITED NATIONS-IMPLEMENTED RESTRICTIONS ON WOOD
PACKAGING MATERIAL (WPM). THIS REQUIREMENT IS SPECIFICALLY CONCERNED WITH INVASIVE SPECIES SUCH AS THE
PINEWOOD NEMATODE. WPM IS DEFINED AS WOOD PALLETS, SKIDS, LOAD BOARDS, PALLET COLLARS, WOODEN BOXES, REELS, DUNNAGE, CRATES, FRAMES, AND CLEATS. THE STATEMENT BELOW CITES THE REQUIREMENTS IN DETAIL AND
COVERS LUMBER FOR BUILDING CONTAINERS AND PALLETS USED FOR DELIVERIES, RESULTING IN SHIPMENTS WORLDWIDE
(DIRECT, OR THROUGH AIR LOGISTICS CENTERS (ALC), CONTAINER CONSOLIDATION POINTS (CCP), OR OTHER BASES).
WOODEN LUMBER, WOODEN PALLET AND PACKAGING/CONTAINER STATEMENT:
ALL WOODEN LUMBER, WOODEN PALLETS, AND WOODEN CONTAINERS PRODUCED ENTIRELY OR IN PART OF WOOD
PACKAGING MATERIAL (WPM) SHALL BE CONSTRUCTED FROM DEBARKED WOOD IN ADDITION TO THE APPLICATION OF
HEAT-TREATED (HT) MATERIAL (HT TO 56 DEGREES CENTIGRADE OR 133 DEGREES FAHRENHEIT FOR 30 MINUTES).
CERTIFICATION/MARKING IS REQUIRED BY AN ACCREDITED AGENCY RECOGNIZED BY THE AMERICAN LUMBER STANDARDS
COMMITTEE (ALSC). FOR REFERENCE DOCUMENTATION, SEE LATEST REVISION OF "INTERNATIONAL STANDARDS FOR
PHYTOSANITARY MEASURES (ISPM NO. 15), "REGULATION OF WOOD PACKAGING MATERIAL IN INTERNATIONAL TRADE."
SHEET 3 OF 5
SHEET 4 OF 5
DETAIL A
DETAIL B
9 12
15 12
17 78
7 34
13 12
1 12
1 14
DETAIL C
DETAIL D
10 12
18 78
29 38
37 58
6 58
9 14
11 12
12 12
13 38
14 78
33 14
1 34
5 12
1 58
2 14
3 34
1 34
7 12
15 12
9 12
DIRECTION
FLUTE
8 34
13 12
SHEET 5 OF 5
ITEM REFERENCE
D
C
Sheets and Views
002671046-SHEET 01
002671046-SHEET 02
002671046-SHEET 03
002671046-SHEET 04
002671046-SHEET 05
MANUFACTURING QUALIFICATION REQUIREMENTS
NSN: 1620-00-267-1046
P/N: 68A450900-1015 Noun: Damper, Shimmy Nose Wheel Steering Application: F-15
30 Jun 2015 Section C 1/3
SECTION C:
1. QUALIFICATION REQUIREMENTS THAT MUST BE SATISFIED TO BECOME A QUALIFIED SOURCE
a. Prequalification Notice/Sources Sought: The offeror shall notify the appropriate government Small Business Office or, if responding to a solicitation, the contracting officer in the appropriate government contracting office, of intent to qualify as a source for this Damper, Shimmy Nose Wheel Steering.
b. Facilities, Testing, and Inspection Capabilities: The offeror must certify to the government that they have, or have access to, the required facilities and equipment to manufacture, inspect, test, package, and store the item. The offeror shall make their facilities, equipment, tooling, and personnel available for evaluation and inspection by the government.
c. Data Verification: The offeror must verify that he has a complete data package. This verification must include a complete list of all procedures, drawings, and specifications, including change possession. The offeror may also be required to produce copies of all applicable procedures, drawings, or specifications.
d. Manufacture/Process Verification: The offeror must manufacture this item to conform to the government requirements as prescribed within the approved engineering/technical data package. The offeror must show compliance with Unique Identification (IUID) requirements in accordance with DFARS 211.274 as prescribed within the approved engineering/technical data package. The offeror must provide, at their own expense; data showing the results of all quality, performance, and environmental evaluations conducted by the offeror to show compliance with the government requirements as prescribed by 417 SCMS/GUEA. The offeror shall also identify its sources for materials and its standards for internally used processes. If the item considered is a Critical Safety Item (CSI), upon request the offeror must provide evidence of a management plan for all critical characteristics and/or processes. All manufacturing, assembly, and inspection points for CSI s must be controlled by detailed procedures outlining each step or parameter of the process along with any materials, tooling, equipment, environmental control, and operator certification required that leads to the specific production of an end item. Plans should clearly identify all critical characteristics and will include identification, in accordance with contractor procedures, as to its particular revision. All process plans must clearly define sequence of operation, machine type, and accept/reject limits for the specific process or operation. Critical processes not easily verified by subsequent inspection must clearly define process-operating parameters with tolerances.
e. Test and Evaluation and/or Verification: The offeror, at their own expense, shall prepare and submit to 417 SCMS/GUEA for their prior approval, a qualification test plan/procedure detailing how they intend to verify compliance with all performance, environmental, mechanical, and quality assurance requirements identified by the approved technical data package. After completion of the approved qualification testing, the offeror shall be required to submit a complete test report of the results to 417 SCMS/GUEA for their review and approval prior to the
P/N: 68A450900-1015
30 Jun 2015 Section C 2/3 contract award. The government retains the right to exercise the option to inspect the testing processes, including on-site witnessing of any or all documented testing. To allow accomplishing this, the offeror shall notify the government at least 30 days in advance of the occurrence of any testing that will be used as a basis for qualification.
shall be made available for government inspection during these tests.
f. Qualification Article Verification: The offeror must provide, at their own expense, a pre-contract award qualification article for evaluation by the government. This article must comply with all of the requirements of the approved technical data package. This article shall be subjected to a form, fit, and function evaluation to demonstrate compatibility with the weapon system and to evaluate the manufacturing capability of the offeror. Offerors will be notified whether or not their qualification article passed or failed the required qualification testing within 700 days of submitting a product for qualification testing. Note that successful completion of the qualification testing does not guarantee any contract award. If the offeror is deemed qualified and awarded the contract, a post-contract award first article exhibit may be required to verify production capability.
g. Qualification Requirement Cost Estimate: Estimated likely costs for testing and evaluation, which will be incurred by the potential offering party to become qualified: $619,170.00.
h. Qualification Time Completion Estimate: It is the estimate of the engineering support activity that completion of this qualification effort should require 700 days. This is based on complexity of the Damper, Shimmy Nose Wheel Steering and other factors.
i. Qualification Time Limitation: An offeror may not be denied the opportunity to submit and have considered an offer for a contract if the offeror can demonstrate to the satisfaction of the contracting officer that the offeror (or its product) meets these standards for qualification or can meet them before the date specified for award of the contract. The award will not be delayed to provide the vendor with an opportunity to demonstrate its ability to meet the standards specified in this qualification requirement.
j. Evaluation of Proposals Not Previously Qualified: The offeror must be fully qualified in order to be eligible for a contract award. Therefore, the offeror must fulfill all of the requirements stated, in writing, in the qualification requirement before the date specified for award of the contract. Once all requirements are met, the offeror will be listed as an approved source for this item. Approval, however, does not guarantee subsequent contract award.
P/N: 68A450900-1015
30 Jun 2015 Section C 3/3
2. SOURCE QUALIFICATION WAIVER REQUIREMENTS
Sources who meet any of the following source Qualification Waiver Criteria (QWC) may apply for a waiver of all or part of the qualification requirements. If a waiver is granted and the offeror is awarded a contract, the offeror may still be required to provide a post-contract award first article exhibit to verify production capability:
a. QWC1: The potential source submits written certification that the articles have been supplied to the government or original equipment manufacturer (e.g., DD Form 250, Material Inspection and Receiving Report, Purchase Order invoice, etc).
b. QWC2: The potential source is qualified on the right-hand article and requests to be qualified on the left-hand article. If the right-and left-hand articles are mirror images of each other, then approval can generally be given.
c. QWC3: A source qualified to provide an assembly is usually qualified to provide subassemblies, major components, and items of that assembly.
d. QWC4: A source qualified to provide earlier dash numbers of a basic P/N may be qualified to provide other dash numbers of that same basic P/N, provided there is no increase in complexity, criticality, or other relevant requirements.
e. QWC5: A source qualified to provide a similar or like item can be qualified to provide the required item. Similar or like item source approval request packages shall be submitted and have Government evaluation completed accordance with AFMCI 23-113. The source under consideration for qualification must have a significant portion of the manufacturing capability to produce the required item. However, for approval, the engineering authority must verify that there is no increase in complexity, criticality, or other requirements over that of the similar item.
At a minimum, the source shall provide a complete set of drawings for the similar item and written proof, such as purchase orders, shipping documents, etc., to show that the similar item was provided to the original equipment manufacturer or DoD.
f. QWC6: A source previously qualified to provide an item, but which has been purchased, sold, merged, absorbed, reformed, split, etc., may qualify if it can be established that the qualification is currently with the requester and that the requester has the same or equivalent facilities, tooling, equipment, personnel, and utilizes the original forging, castings, etc., in the manufacturing process.
File details come from the government source that posted it. Updated .