SPI - AK15815781.pdf

PDF 235 KB Posted

Attached to
Axle Assembly, Automotive Federal contract opportunity
Solicitation number
SPRDL1-24-Q-0090
Issued by
Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI ·

This document is a Special Packaging Instruction (SPI) for Axle Assembly, Rear - Rear (NSN 2520-01-581-5781). It provides detailed specifications and instructions for the preservation, packaging, and marking of this item.

The SPI outlines the required cleaning, preservative application, barrier materials, blocking and bracing, container type, and markings. It includes specific details on the dimensions and quantity of the wooden blocking and bracing components, as well as the required hardware. The packaging is designed to meet Military Standard (MIL-STD) 2073-1D and other applicable military specifications. This reusable shipping container must be marked as such and have instructions for opening. The SPI is dated October 22, 2020 and is revision A.

View the file

Other files for this federal contract opportunity

Other files attached to Axle Assembly, Automotive, newest first.
File Type Posted
SPRDL1-24-Q-0090 (Amendment 0003).pdf PDF
SPRDL1-24-Q-0090 Conformed 3.0.pdf PDF
SPRDL1-24-Q-0090 (Amendment 0002).pdf PDF
SPRDL1-24-Q-0090 Conformed 2.0.pdf PDF
SPRDL1-24-Q-0090 (Amendment 0001).pdf PDF
SPRDL1-24-Q-0090 Conformed.pdf PDF
SPRDL1-24-Q-0090.pdf PDF

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

SW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 2212.0 76.290 91.3 X 38.3 X 37.6

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-C A/R PRESERVATIVE: MIL-G-10924

MIL-STD-2073-1D & NOTE B 2-D A/R CAPS/PLUGS: NAS 847

14. DRYING 3-E A/R PRESERVATIVE:MIL-PRF-16173, GRADE 4

MIL-STD-2073-1D & NOTE B 4-F 7 BARRIER: MIL-PRF-121, TYPE II,

15. PACKING

5-G 29 BLOCKING AND BRACING: ASTM-D6199

6-H 1 CONTAINER:MIL-C-104, TYPE II, CLASS 2, STYLE A,

a. LEVEL A SIZE: 89 X 36 X 27

MIL-STD-2073-1D & NOTE I

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE J

17. NOTES/DRAWING

A. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1D AND ANY

APPLICABLE CONTAINER SPECIFICATIONS.

B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PRESERVATIVE AND

PACKAGING MATERIALS.

C. PRESERVATIVE: APPLY PRESERVATIVE THROUGH ALL ZERK (GREASE) FITTINGS..

D. SEAL ALL OPENINGS TO INTERIOR OF AXLE WITH CAPS/PLUGS OF APPROPRIATE SIZE.

E. PRESERVATIVE: APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED EXTERIOR METALLIC SURFACES.

F. BARRIER: APPLY BARRIER MATERIAL TO ALL AREAS AXLE COMES IN CONTACT WITH CONTAINER

LUMBER, 7 PLACES TOTAL, SECURE WITH TAPE ASTM-D6123.

G. SEE PAGES 2 – 6.

H. CLOSURE: CLOSE CONTAINER ACCORDING TO THE APPLICABLE CONTAINER SPECIFICATION(MIL-C-104).

I. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

J. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM ½ INCH HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION THE TOP SHALL BE MARKED “REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER”, USING MINIMUM ½ INCH HIGH BLACK LETTERS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 6 Pages Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188 SW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 6 Pages

TTOOPP HHOOLLDD--DDOOWWNN EENNDD HHOOLLDD--DDOOWWNN EENNDD HHOOLLDD--DDOOWWNN

SSUUPPPPOORRTT AASSSSYY ##11 SSUUPPPPOORRTT AASSSSYY ##11

SSUUPPPPOORRTT

AASSSSYY ##22

BBLLOOCCKKIINNGG

IITTEEMM ““AA””

BBLLOOCCKKIINNGG

IITTEEMM ““BB””

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

ITEM SIZE QTY ADDITIONAL NOTES:

A 4 X 4 X 17-1/2 1 SEE PAGE 5

B 4 X 4 X 12-1/2 1 SEE PAGE 5

C 4 X 4 X 34-1/2 3 END & TOP HOLD-DOWN

D 4 X 4 X 7-1/4 2 END HOLD-DOWN

E 2 X 12 X 34-1/2 2 END HOLD-DOWN

F 2 X 4 X 22 1 TOP HOLD-DOWN

G 2 X 10 X 18 3 SUPPORT ASSY #2

H 2 X 6 X 9-1/4 2 SUPPORT ASSY #2

J 2 X 6 X 21 12 SUPPORT ASSY #1

K 2 X 6 X 8-1/4 2 SUPPORT ASSY #1

L 1/2 X 16 CARRIAGE BOLT 4 SUPPORT ASSY #1

M 1/2 X 18 CARRIAGE BOLT 2 SUPPORT ASSY #1

N 1/2 X 10 CARRIAGE BOLT 4 SUPPORT ASSY #2

O 3/8 X 4 LAG SCREW 8 END HOLD-DOWN

P 3/8 FLAT WASHER 8 END HOLD-DOWN

Q 1/2 INCH HARDWARE SET 10 HARDWARE SET INCLUDES:

1- ½ NUT, 1- ½ FLAT WASHER,

1- ½ SPLIT WASHER

NOTES: ALL LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED.

HARDWARE SHALL BE PAINTED, PLATED OR PRESERVED WITH MIL-PRF-16173, GRADE 4.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 6 Pages

Designed using Perform Pro, WHS/DIOR, Jun 97

SSEECCUURREE EENNDD BBLLOOCCKKIINNGG

FFRROOMM EEXXTTEERRIIOORR OOFF

CCOONNTTAAIINNEERR UUSSIINNGG 33//88 XX 44

LLAAGG SSCCRREEWWSS && WWAASSHHEERRSS,,

QQTTYY 44 EEAACCHH

SSEECCUURREE EENNDD

BBLLOOCCKKIINNGG FFRROOMM

EEXXTTEERRIIOORR OOFF

CCOONNTTAAIINNEERR

UUSSIINNGG 33//88 XX 44

LLAAGG SSCCRREEWWSS &&

WWAASSHHEERRSS,, QQTTYY 44

EEAACCHH

TTOOPP HHOOLLDD--DDOOWWNN

IISS LLOOCCAATTEEDD IINN

TTHHEE CCEENNTTEERR,,

EEQQUUAALL

DDIISSTTAANNCCEE FFRROOMM

EEAACCHH EENNDD

PPAANNEELL.. SSEECCUURREE

TTOO IINNTTEERRIIOORR OOFF

TTOOPP PPAANNEELL

UUSSIINNGG

NNAAIILLSS//SSTTAAPPLLEESS

CCOONNFFOORRMMIINNGG TTOO

AASSTTMM--FF11666677..

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

SUPPORT ASSEMBLY #1, QTY 1

SUPPORT ASSEMBLY #2, QTY 2

NOTE: ASSEMBLE BLOCKING USING NAILS/STAPLES CONFORMING TO ASTM-F1667.

ALL DRILL HOLES ARE 1/2 INCH DIAMETER.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 6 Pages

Designed using Perform Pro, WHS/DIOR, Jun 97

IITTEEMM ““GG””

IITTEEMM ““HH””

IITTEEMM ““KK””

IITTEEMM ““JJ””

IITTEEMM ““NN””

IITTEEMM ““NN””

IITTEEMM ““MM””

IITTEEMM ““LL””

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

NOTE: ASSEMBLE BLOCKING USING NAILS/STAPLES CONFORMING TO ASTM-F1667.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 5 of 6 Pages

EENNDD HHOOLLDD--DDOOWWNN,, QQTTYY 22 TTOOPP HHOOLLDD--DDOOWWNN,, QQTTYY 11

BBLLOOCCKKIINNGG IITTEEMM ““AA””,, QQTTYY 11

IITTEEMM ““CC””

IITTEEMM ““EE””

IITTEEMM ““DD”” IISS

LLOOCCAATTEEDD IINN TTHHEE

CCEENNTTEERR OOFF ““EE””

IITTEEMM ““CC””

IITTEEMM ““FF””

BBLLOOCCKKIINNGG IITTEEMM ““BB””,, QQTTYY 11

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12512474 (19207) AXLE ASSEMBLY, REAR - REAR 19207 AK15815781

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-581-5781 10-22-2020 A

BASE WITH BLOCKING (TOP VIEW)

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 6 of 6 Pages

Designed using Perform Pro, WHS/DIOR, Jun 97

SSUUPPPPOORRTT AASSSSEEMMBBLLYY ##11

SSUUPPPPOORRTT AASSSSEEMMBBLLYY ##22

IITTEEMM ““AA””

IITTEEMM ““BB””

SSUUPPPPOORRTT AASSSSEEMMBBLLYY ##22

SSEECCUURREE BBLLOOCCKKIINNGG TTOO BBAASSEE

UUSSIINNGG NNAAIILLSS//SSTTAAPPLLEESS

CCOONNFFOORRMMIINNGG TTOO AASSTTMM--

FF11666677..

File details come from the government source that posted it. Updated .