SPI AK15700617.pdf

PDF 238 KB Posted Nov 14, 2022

Attached to: Driving Automotive Axle Assembly Federal contract opportunity
Solicitation number: SPRDL1-22-R-0106
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 27, 2023

This document provides special packaging instructions and drawings for an automotive driving axle assembly to be procured by the Defense Logistics Agency Land and Maritime. The assembly, identified by National Stock Number 2520-01-570-0617 and manufacturer CAGE code 75Q65, is to be preserved, packed, and shipped according to military standards. Specific requirements include applying preservatives, installing caps and plugs, using barriers and blocking within the unit pack and shipping container. The container is to hold the axle assembly oriented as shown in the drawings, secured with wood blocking and metal brackets attached using specified hardware.

The related pre-solicitation notice seeks bids to supply 15 axle assemblies with an option for 15 more. The solicitation will be posted on beta.SAM.gov with responses due as specified there. The contracting officer may utilize a reverse auction as a pricing technique, requiring contractors to register on the specified system and receive training to participate. The requirement is for the Defense Logistics Agency Land and Maritime.

View the file

Other files for this federal contract opportunity

Other files attached to Driving Automotive Axle Assembly, newest first.
File	Type	Posted
SPRDL122R0106-0001.pdf	PDF	Dec 8, 2022
SPRDL122R0106.pdf	PDF	Nov 14, 2022

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 11 ooff 55 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-570-0617 01/08/2016

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 2395.0 89.882 105.3 X 40.3 X 36.6

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, METHOD 20

13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-16173, GRADE 4

MIL-STD-2073-1 2-C A/R PRESERVATIVE: MIL-G-10924

14. DRYING 3-D A/R CAPS/PLUGS: NAS-847

MIL-STD-2073-1 4-E A/R BARRIER: MIL-PRF-121, TYPE II

15. PACKING

5-F A/R BLOCKING AND BRACING: ASTM-D6199

6-G 2 BRACKETS

a. LEVEL A

7-H 1 HARDWARE

MIL-STD-2073-1 & NOTE J 8-I 1 CONTAINER: ASTM-D7478, TY II, CL 2, ST A

b. LEVEL B

SIZE: 97-1/2 X 32-3/4 X 29-1/2

NOT APPLICABLE

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED EXTERNAL METALLIC SURFACES. DO NOT APPLY

ANY PRESERVATIVE TO THE INTERIOR WALLS OF WHEEL HUBS.

C. APPLY PRESERVATIVE TO ALL GREASE (ZERKS) FITTINGS.

D. SEAL ALL FITTINGS AND OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.

E. PLACE MIL-PRF-121 PAPER BETWEEN WOOD BLOCKING AND AXLE, SECURE TO BLOCKING USING TAPE.

SEE TABLE 1 FOR BARRIER SIZES AND LOCATIONS.

F. SECURE BLOCKING TOGETHER AND TO THE BASE OF THE CONTAINER USING NAILS CONFORMING TO

ASTM-F1667, SEE FIGURES 1, 3 – 5 FOR BLOCKING SIZES AND ORIENTATION.

G. BRACKETS SHALL BE FABRICATED FROM COMMERCIAL GRADE PLATE STEEL. BRACKETS SHALL BE FORMED BY BENDING AND BE PAINTED, PLATED OR PRESERVED USING MIL-PRF-16173, GR 4. ATTACH BRACKETS TO BLOCKING USING ITEM J IN TABLE 1. SEE FIGURES 2, 4 & 5 FOR BRACKET DRAWINGS

AND PLACEMENT.

H. ALL HARDWARE SHALL BE ZINC PLATED AND CONFORM TO ASTM-F2329. SEE TABLE 1 AND FIGURES 4 &

5 FOR SIZES AND LOCATIONS.

I. CONTAINER IS TO BE CONSTRUCTED WITH 3 SKIDS WITH THE MIDDLE SKID CENTERED IN THE

CONTAINER WIDTH. PLACE AXLE ASSEMBLY INTO CONTAINER AS SHOWN IN FIGURE 6. CLOSE

CONTAINER IN ACCORDANCE WITH ASTM-D7478.

J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 22 ooff 55

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 EW

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-570-0617 01/08/2016

TABLE 1 – BILL OF MATERIAL

ITEM SIZE QTY DESCRIPTION REFERENCE

2 (NOM) X 6 (NOM) X

32-3/4 OVERALL

LENGTH

10 ASTM-D6199 SEE FIGURES 4 & 5

2 (NOM) X 6 (NOM) X

14-1/2 OVERALL

LENGTH BEVEL ONE

END 45 DEGREES

2 ASTM-D6199 SEE FIGURES 1, 4 – 6

C BRACKET 2 COMMERCIAL GRADE PLATE

STEEL SEE FIGURES 2, 4 & 5

4 (NOM) X 4 (NOM) X

23-1/2 OVERALL

LENGTH

2 ASTM-D6199 SEE FIGURES 3 & 4

E 5 X 10 2 MIL-PRF-121, TYPE II

PLACE BETWEEN ITEM

D AND AXLE, NOT

PICTURED

F 8 X 12 2 MIL-PRF-121, TYPE II

PLACE BETWEEN

ITEMS A, B & C AND

AXLE, NOT PICTURED

G 3/4 X 24” HARDWARE

SET 4

HARDWARE SET CONSISTS OF:

1PC 1/2 X 20” CARRIAGE BOLT,

1PC 1/2 FLAT WASHER, 1PC 1/2

LOCK WASHER, AND 1 PC 1/2

NUT

SEE FIGURES 4 & 5

H 1/2 X 14” HARDWARE

SET 2

HARDWARE SET CONSISTS OF:

1PC 1/2 X 14” CARRIAGE BOLT,

1PC 1/2 FLAT WASHER, 1PC 1/2

LOCK WASHER, AND 1 PC 1/2

NUT

SEE FIGURES 4 & 5

I 1/2 X 15” HARDWARE

SET 2

HARDWARE SET CONSISTS OF:

1PC 1/2 X 15” CARRIAGE BOLT,

1PC 1/2 FLAT WASHER, 1PC 1/2

LOCK WASHER, AND 1 PC 1/2

NUT

SEE FIGURES 4 & 5

J 3/8 X 6” BRACKET

HARDWARE SET 4

HARDWARE SET CONSISTS OF:

1PC 3/8 X 5” LAG BOLT AND

1 PC 3/8 FLAT WASHER

ALL LAG SCREWS

LOCATIONS SHALL BE

PRE-DRILLED WITH 1/4

DIAMETER BIT, NOT

PICTURED

FIGURE 1 - ITEM B DIMENSIONS (SIDE VIEW)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 33 ooff 55

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617

FIGURE 2 – ITEM C BRACKET DIMENSIONS

FIGURE 3 – ITEM D DIMENSIONS (TOP VIEW)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 44 ooff 55

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617

FIGURE 4 – ITEM A – I LOCATIONS IN CONTAINER

FIGURE 5 - ITEM A - C AND HOLE LOCATIONS ON CONTAINER BASE (TOP VIEW)

A (2 STACKS OF 5)

C (X2)

D I (X2 AGAINST

ITEM B)

G (X4 AGAINST

ITEM D)

H (X2 AGAINST

ITEM A)

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE PPaaggee 55 ooff 55

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3831543 (75Q65) AXLE ASSEMBLY,AUTOMOTIVE,DRIVING 19207 AK15700617

FIGURE 6 – ORIENTATION OF AXLE IN CONTAINER

File details come from the government source that posted it. Updated Nov 14, 2022.