SPI 444.pdf

PDF 209 KB Posted Dec 7, 2020

Attached to: Inertial Navigation Federal contract opportunity
Solicitation number: SPRDL120R0125
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 28, 2023

This document provides special packaging instructions and a bill of materials for an inertial navigation unit. It specifies cleaning, preservation, packing, and marking requirements according to various military standards for the part, which is identified as a Honeywell HG9740BA4 inertial navigation system with national stock number 5895-01-657-0981. The unit is to be packaged using various materials including caps, greaseproof wrap, cushioning pads of defined sizes, containers, bags, and exterior boxes or crates. The Defense Logistics Agency Land and Maritime will solicit this item through a presolicitation notice for quantity of 25 each with an option for 100% more. The solicitation number will be SPRDL120R0125 and is expected to be posted on or around December 1, 2020.

View the file

Other files for this federal contract opportunity

Other files attached to Inertial Navigation, newest first.
File	Type	Posted
SPRDL120R0125-0001.pdf	PDF	Dec 8, 2020
SPRDL120R0125.pdf	PDF	Dec 7, 2020

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

XCC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12546254 (19207) INERTIAL NAV UNIT 19207 AK16750981

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5895-01-675-0981 05/01/2019 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE *24.0 *5.456 *22.9 X *21.9 X *18.8

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 41

13. CLEANING

MIL-STD-2073-1

14. DRYING

MIL-STD-2073-1

SEE NOTES

15. PACKING

a. LEVEL A

MIL-STD-2073-1 AND NOTE I

b. LEVEL B

MIL-STD-2073-1 AND NOTE I

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

* UNIT PACK WEIGHT, CUBE AND SIZES ARE ESTIMATED AND ARE PROVIDED FOR INTERNAL GOVERNMENT

PLANNING PURPOSES ONLY.

A. ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE SPECIFIED.

B. PLACE CAPS, ITEM 1, ON CONNECTORS. IF PART IS RECEIVED WITH CAPS ALREADY INSTALLED, THEN THIS

STEP MAY BE ELIMINATED.

C. WRAP PART WITH GREASEPROOF WRAP, ITEM 2, AND SECURE WITH TAPE.

D. PLACE CUSHIONING, ITEM 3, INTO CONTAINER, ITEM 4, AND ADD WRAPPED PART IN MIDDLE OF

CUSHIONING AS SEEN ON PAGE 2.

E. CLOSE CONTAINER, ITEM 4, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

F. PLACE CONTAINED PART INTO BAG, ITEM 5, AND CLOSE BY HEAT SEALING.

G. PLACE CUSHIONING, ITEM 6, INTO CONTAINER, ITEM 7, AND ADD BAGGED CONTAINER IN MIDDLE OF

CUSHIONING AS SEEN ON PAGE 3.

H. CLOSE CONTAINER, ITEM 7, IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

I. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B: PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

J. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKAGING IN ACCORDANCE WITH

MIL-STD-2073-1 AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

CHART A:

(2 PLACES)

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12546254 (19207) INERTIAL NAV UNIT 19207 AK16750981

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5895-01-675-0981 05/01/2019 -

PAD SIZE QTY

A 17-1/2 X 13 X 4-1/2 2 B 13 X 7-1/2 X 4-1/2 2 C 8-1/2 X 7-1/2 X 4-1/2 2

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

CHART B:

(2 PLACES)

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12546254 (19207) INERTIAL NAV UNIT 19207 AK16750981

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5895-01-675-0981 05/01/2019 -

PAD SIZE QTY

D 22 X 17-1/2 X 2 2 E 17-1/2 X 17 X 2 2 F 18 X 17 X 2 2

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

-CC

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12546254 (19207) INERTIAL NAV UNIT 19207 AK16750981

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

5895-01-675-0981 05/01/2019 -

BILL OF MATERIALS

ITEM

NUMBER

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

CAP

WRAP

CUSHIONING

CONTAINER

BAG

CUSHIONING

CONTAINER

A/R 32 X 16

SEE CHART A

17-1/2 X 16-1/2 X 13

36 X 36

SEE CHART B

22-1/2 X 21-1/2 X 18

NAS831 OR EQUIVALENT

MIL-PRF-121, TYPE I

MIL-PRF-26514, TYPE I, CLASS 2,

GRADE B

ASTM-D5118, TYPE CF, CLASS D,

STYLE RSC, VARIETY SW, GRADE 200

MIL-DTL-117, TYPE II, CLASS E, STYLE 1

A-A-59136, CLASS 1, GRADE A,

TYPE I, 2 LB

ASTM-D5118, TYPE CF, CLASS WR,

STYLE RSC, VARIETY SW, GRADE W5c

A/R

File details come from the government source that posted it. Updated Dec 7, 2020.