SPI AK16692754.pdf
PDF 160 KB Posted
- Attached to
- Shipping Container Federal contract opportunity
- Solicitation number
- SPRDL1-20-R-0110
About this file
This document contains special packaging instructions for a container to hold an engine. The container is identified as National Stock Number 8145-01-669-2754, with a unit pack weight of 1293.5 pounds and dimensions of 70.3 x 49.0 x 60.3 inches. The container is to be preserved in accordance with Military Standard 2073-1E, Method 55, and is to include 104 units of desiccant packaged according to Military Standard 3464, Type I. Markings must be applied to the container data plate and exterior per Military Standards 129 and the document notes.
The related federal contract opportunity is a pre-solicitation notice seeking storage containers identified by National Stock Numbers 8145-01-669-2754, 8145-01-669-2742, and 8145-01-669-2746. The solicitation is expected to be released on or around February 11, 2020 through FedBizOpps, with a closing date of approximately March 12, 2020. The requiring activity is the Defense Logistics Agency Land and Maritime. Technical data is available for this procurement.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPI AK16692746.pdf | ||
| SPI AK16692742.pdf | ||
| SPRDL120R0110.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CL
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12573239 (19207) CONTAINER, ENGINE 19207 AK16692754
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
8145-01-669-2754 03/18/2019 -
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA. NONE 1293.5 120.206 70.3 X 49.0 X 60.3
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1E, METHOD 55 1-B DESICCANT: MIL-D-3464, TY I (104 UNITS)
13. CLEANING
MIL-STD-2073-1E
14. DRYING
MIL-STD-2073-1E
15. PACKING
a. LEVEL A
MIL-STD-2073-1E AND NOTE D
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE C
17. NOTES / DRAWING
A. QUALITY ASSURANCE PROVISIONS:
1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.
2. INSPECT THE CONTAINER IN ACCORDANCE WITH A-A-52462, INCLUDING THE FIRST ARTICLE
INSPECTION REQUIREMENT.
B. PLACE 104 UNITS OF DESICCANT INTO CONTAINER DESICCANT BASKET.
C. SPECIAL MARKINGS SHALL BE APPLIED AS FOLLOWS:
1) THE FOLLOWING INFORMATION SHALL BE MARKED ON THE CONTAINER DATA PLATE FOR
ALL CONTAINERS:
a) CONTAINER SPECIFICATION
b) CONTAINER CONTRACT NUMBER
c) CONTAINER NATIONAL STOCK NUMBER
2) ALL THE DATA PLATE INFORMATION WILL BE MARKED ON THE CONTAINER DATA PLATE FOR
THOSE CONTAINERS GOING TO AN ENGINE CONTRACTOR WITH THE FOLLOWING
INFORMATION FOR THE DATA PLATE:
a) ENGINE MODEL NUMBER
b) ENGINE NATIONAL STOCK NUMBER
c) ENGINE WITH CONTAINER NATIONAL STOCK NUMBER
3) “CARC” SHALL BE MARKED WITH PAINT CONFORMING TO MIL-DTL-53039 OR MIL-DTL-64159, COLOR BLACK, IN 1-INCH LETTERS IN AN AREA AS NEAR AS PRACTICAL TO THE NAMEPLATE.
4) “REUSABLE CONTAINER: DO NOT DESTROY” SHALL BE MARKED WITH PAINT CONFORMING
TO MIL-DTL-53039 OR MIL-DTL-64159, COLOR BLACK, IN ½-INCH LETTERS IN AN AREA ON THE
LOWER CONTAINER SECTION ON THE SAME END AS THE NAMEPLATE.
D. THE UNIT CONTAINER SHALL BE THE SHIPPING CONTAINER.
File details come from the government source that posted it. Updated .