SPI_AK12076374_Rev-D_20FEB2009.pdf

PDF 40 KB Posted Nov 13, 2019

Attached to: Cylinder Assembly, Actuating, Linear Federal contract opportunity
Solicitation number: SPRDL1-20-R-0004
Issued by: Defense Logistics Agency Land and Maritime

About this file

Written by GovTribe AI · Dec 27, 2023

This document includes a special packaging instruction and a related federal contract opportunity solicitation. The special packaging instruction provides preservation and packaging requirements for a cylinder assembly actuating linear part number 6-372-002506 from cage code 12361. The related solicitation seeks offers for 40 each of the specified cylinder assemblies, with an option for an additional 40 each. Offerors must be the approved source or an authorized distributor to be considered. The solicitation includes a reverse auction provision and has a close date of December 16, 2019. The contracting agency is the Defense Logistics Agency Land and Maritime.

View the file

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

FORM APPROVED

OMB No. 0704-0188

3040-01-2076374 02/20/09

AK12076374

4. NATIONAL STOCK NO.

2. CAGE 3. SPI NO.

6. REVISION 5. DATE

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE

-SW

WEATHERIS

SPECIAL PACKAGING INSTRUCTION

6-372-002506 (12361) CYLINDER 19207

A. QUALITY ASSURANCE PROVISIONS, PRESERVATION: INSPECT THE PRESERVATION, UNIT PACK, AND PACKING IN

ACCORDANCE WITH MIL-STD-2073-1D.

B. PRESERVATIVE: PRESERVE INTERNALLY WITH OPERATIONAL LUBRICANT. CYLINDER RODS FULLY RETRACTED.

THOROUGHLY DRAIN EXCESS.

C. PRESERVATIVE: APPLY TO BARE, UNPLATED, UNPAINTED METALLIC SURFACES.

D. WRAP: SINGLE WRAP REQUIRED. COMPUTE SIZE IN ACCORDANCE WITH MIL-STD-2073-1D. SECURE WRAP WITH

TAPE.

E. PACKING: THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

1 EACH NONE 0293.0 0005.900

MIL-STD-2073-1D, METHOD 20

MIL-STD-2073-1D

10. UNIT PACK CU. (CU. FT.) 11. UNIT PACK SIZE (IN)

12. MILITARY PRESERVATION

17. NOTES / DRAWING

15. PACKING

14. DRYING

13. CLEANING

7. QUP 8. ICQ 9. UNIT PACK WT. (LB)

20.

DESCRIPTION

18.

STEPS

19.

REQ'D

MIL-STD-2073-1D, SEE NOTE E

NOT APPLICABLE

MIL-STD-129

095.2 010.5 010.2X X

b. LEVEL B

16. MARKING

a. LEVEL A

1B 2C 3D 4E

A/R A/R

PRESERVATIVE: MIL-PRF-2104.

PRESERVATIVE: MIL-PRF-16173, GR 4.

WRAP: MIL-PRF-121, TY I, SIZE A/R.

CONTAINER: ASTM-D6880, ST 1,

SIZE 92-1/4 X 8-3/4 X 6, SEE PAGE 2.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages