SPI - AM9380400.pdf
PDF 439 KB Posted
- Attached to
- BACK UP SIGHT Federal contract opportunity
- Solicitation number
- SPRDL1-20-Q-0124
About this file
This document provides a special packaging instruction and related federal contract opportunity for backup sights. The special packaging instruction specifies how to clean, wrap, cushion, bag, and containerize the backup sights for shipment and long-term storage. The related federal contract opportunity is a total small business set-aside solicitation issued by the Defense Logistics Agency Land and Maritime to procure 24 backup sights per line item, with an option for 100% more within 365 days. Technical data is available, and the solicitation allows for the use of a reverse auction pricing technique. Offerors must be registered in the reverse auction system to participate if an auction is held.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL120Q0124.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
9380400 BACK UP SIGHTS 19200 AM9380400
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
6650-01-313-8946 200211 B / L20K2062
7. QUP / UNIT OF ISSUE 8. ICQ 9. UNIT PACK WT. (LB) (0.0) 10. UNIT PACK CU (CU.
FT.)(0.000)
11. UNIT PACK SIZE (INCHES)(00.0)
1 / EA 74.0 2.63 19.6 X 16.1 X 14.4
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1, METHOD 42 1 1 BAG: MIL-DTL-117, TYPE III, CLASS B (SEE NOTE G)
13. CLEANING 2 AR WRAP: A-A-50177, TYPE II, (SEE NOTES E & H)
* AND SEE NOTES A-D 3 AR TAPE: ASTM D6123/D6123M
14. DRYING 4 AR CUSHIONING: (SEE NOTE J)
* AND SEE NOTES A-D 5 36 DESICCANT: MIL-D-3464, TYPE I (SEE NOTE K)
15. PACKING
6 1 CONTAINER: ASTM D5118/D5118M, RSC, GR 200, DOM
7 AR CLOSURE: ASTM D1974/D1974M, SEALING METHOD B
a. LEVEL A 8 1 BAG: MIL-DTL-117, TYPE I, CLASS E
MIL-STD-2073-1 9 1 CONTAINER: ASTM D5118/D5118M, RSC, V3c
b. LEVEL B 10 AR CLOSURE: ASTM D1974/D1974M, SEALING METHOD B
MIL-STD-2073-1
16. MARKING
MIL-STD-129
17. NOTES/DRAWINGS
18.
SPECIFICATIONS, STANDARDS AND DRAWINGS LISTED HEREIN WHICH ARE IN EFFECT ON THE DATE OF THE SOLICITATION FORM A PART OF THIS PACKAGING INSTRUCTION. THE APPLICABLE GENERAL AND REFERENCED REQUIREMENTS OF SPECIFICATION MIL-STD-2073-1 FORM PART OF THESE INSTRUCTIONS. UNLESS OTHERWISE SPECIFIED, MATERIALS WILL BE MINIMUM SIZE IN ACCORDANCE WITH MIL-STD-2073-1. WEIGHTS AND SIZES ARE ESTIMATED AND MAY VARY SLIGHTLY. INTERMEDIATE PACKAGING AND PACKING WILL BE IN ACCORDANCE WITH
SPECIFICATION MIL-STD-2073-1 OR AS OTHERWISE SPECIFIED HEREIN.
TOLERANCES SHALL BE IN ACCORDANCE WITH MATERIAL SPECIFICATIONS. QUALITY PERFORMANCE AND TESTING REQUIREMENTS SHALL BE IN CONFORMANCE WITH MIL-STD-2073-1, OR AS OTHERWISE SPECIFIED.
* UNLESS OTHERWISE SPECIFIED, CLEANING AND DRYING SHALL BE IN ACCORDANCE WITH PARAGRAPH 5.2.1 OF MIL-
STD-2073-1.
A. LOOSE PARTICLES OF DUST SHALL BE REMOVED FROM THE SURFACE OF THE OPTICAL ELEMENTS WITH A
CAMEL HAIR BRUSH.
B. THE SURFACES SHALL BE WIPED WITH A CIRCULAR MOTION USING COTTON, LENS TISSUE PAPER OR FRESHLY
LAUNDERED CHEESECLOTH WHICH IS SATURATED WITH ALCOHOL.
CAUTION: ONLY LENS TISSUE PAPER OR BATISTE CLOTH SHALL BE USED TO CLEAN PLASTIC ELEMENTS. THE SURFACES SHALL BE DRIED BY WIPING WITH CLEAN COTTON, LENS PAPER OR FRESHLY LAUNDERED CHEESECLOTH.
C. A SWAB SHALL BE MADE BY WRAPPING ONE PIECE OF LENS TISSUE PAPER AROUND THE END OF AN ORANGE STICK OR EQUAL. ONE OR TWO DROPS OF ALCOHOL SHALL BE ADDED ON THE TIP OF THE SWAB. THE SWABBING OPERATION SHALL BEGIN AT THE CENTER OF THE POLISHED SURFACES. A LIGHT DOWNWARD PRESSURE SHALL BE EXERTED ON THE SWAB END AND WITH A CIRCULAR MOTION GRADUALLY INCREASE THE RADIUS OF AREA BEING CLEANED UNTIL THE ENTIRE SURFACE HAS BEEN SWABBED. THIS OPERATION SHALL
BE REPEATED UNTIL NO TRACE OF DIRT, LINT OR SMEARS ARE PERCEPTIBLE.
WSC: MM ITEM SIZE: 19.5 X 16.1 X 14.4 ITEM WEIGHT: 67.0 APPROVED: JEFFREY VAN DERVEER
DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 1 of 5 Pages
SPECIAL PACKAGING INSTRUCTION (CONTINUATION SHEET)
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and
Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
9380400 BACK UP SIGHTS 19200 AM9380400
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
6650-01-313-8946 200211 B / L20K2062
17. NOTES/DRAWINGS
D. A RUBBER SYRINGE SHALL BE USED AS A BELLOWS TO REMOVE ANY RESIDUAL DUST OR LINT THAT MAY REMAIN
ON THE CLEANED SURFACES.
E. COVER OPTICAL SURFACES WITH A DOUBLE THICKNESS OF LENS TISSUE AND SECURE WITH TAPE. DO NOT
ALLOW TAPE TO COME IN CONTACT WITH LENS SURFACE.
F. WRAP ITEM IN TWO LAYERS OF CUSHIONING (CELLULAR PLASTIC FILM CUSHIONING, PPP-C-795, CLASS 1; OR OPEN CELL PLASTIC CUSHIONING, A-A-3129; OR POLYPROPYLENE FOAM CUSHIONING, PPP-C-1797) AND SECURE
WITH TAPE. DO NOT ALLOW TAPE TO COME IN CONTACT WITH ITEM.
G. REMOVE RUBBER EYE CUP AND PLACE INTO BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE III, CLASS B, SIZE 4 X
4. SECURE BAG TO ITEM WITH TAPE IN ACCORDANCE WITH ASTM D6123/D6123M.
H. COVER EYELENS AND HEAD WINDOW WITH FOUR (4) LAYERS OF LENS TISSUE SIZE 5 X 5, CUSHION BOTH ITEMS
WITH CUSHIONING IN ACCORDANCE WITH A-A-1898, SIZE 6 X 6 AND SECURE WITH TAPE.
J. FOR DETAILS OF CUSHIONING, BLOCKING AND PLACEMENT OF ITEM WITHIN CONTAINER, SEE SHEETS 3-5.
K. 36 UNITS OF DESICCANT SHALL BE UTILIZED WITHIN THE PACKAGE.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 2 of 5 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
9380400 BACK UP SIGHTS 19200 AM9380400
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 3 of 5 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
9380400 BACK UP SIGHTS 19200 AM9380400
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 4 of 5 Pages
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information
Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subjected to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.
1. PART OR DRAWING NO. NOMENCLATURE 2. CODE IDENT 3. SPI NO.
9380400 BACK UP SIGHTS 19200 AM9380400
4. NATIONAL STOCK NO. 5.DATE OF
DRAWING/SPI(YYMMDD)
6. REVISION / ERR NO.
NOTES:
1. PLYWOOD: A-A-55057, STD INTERIOR W/ EXTERIOR GLUE.
2. FIBERBOARD: ASTM D4727/D4727M, TYPE CF, GRADE 275, CLASS DOM, VARIETY DW.
3. LAMINATE PADS WITH ADHESIVE CONFORMING TO A-A-59692.
4. COAT HARDWARE WITH PRESERVATIVE: MIL-PRF-16173, GRADE 4.
DD Form 2169, JUN 1997 Previous editions are obsolete Page 5 of 5 Pages
File details come from the government source that posted it. Updated .