SPRDL120Q0093-0003.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. Contract ID Code Page Of

2. Amendment/Modification No.

3. Effective Date

4. Requisition/Purchase Req No.

5. Project No. (If applicable)

6. Issued By Code 7. Administered By (If other than Item 6) Code

8. Name And Address Of Contractor (No., Street, City, County, State and Zip Code)

9A. Amendment Of Solicitation No.

9B. Dated (See Item 11)

10A. Modification Of Contract/Order No.

10B. Dated (See Item 13) Code Facility Code

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in item 14. The hour and date specified for receipt of Offers is extended, is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing items 8 and 15, and returning ____________ copies of the amendments: (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. Accounting And Appropriation Data (If required)

13. THIS ITEM ONLY APPLIES TO MODIFICATIONS OF CONTRACTS/ORDERS

It Modifies The Contract/Order No. As Described In Item 14.

A. This Change Order is Issued Pursuant To: The Changes Set Forth In Item 14 Are Made In

The Contract/Order No. In Item 10A.

B. The Above Numbered Contract/Order Is Modified To Reflect The Administrative Changes (such as changes in paying office, appropriation data, etc.) Set

Forth In Item 14, Pursuant To The Authority of FAR 43.103(b).

C. This Supplemental Agreement Is Entered Into Pursuant To Authority Of:

D. Other (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return _______________ copies to the Issuing Office.

14. Description Of Amendment/Modification (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

Except as provided herein, all terms and conditions of the document referenced in item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. Name And Title Of Signer (Type or print)

16A. Name And Title Of Contracting Officer (Type or print)

15B. Contractor/Offeror 15C. Date Signed 16B. United States Of America 16C. Date Signed

By (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITIONS UNUSABLE

30-105-02 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA FAR (48 CFR) 53.243

SEE SCHEDULE

X

Firm Fixed Price

0003 2020JUN08

SPRDL1

DLA LAND WARREN

WARREN, MI 48397-5000

NICHOLAS M. ZANE

EMAIL: NICHOLAS.M.ZANE.CIV@MAIL.MIL

SPRDL1-20-Q-0093

2020MAR19

X

X 2020JUN12 11:30pm

/SIGNED/

2 signed

SEE SECOND PAGE FOR DESCRIPTION

1 18

CONTINUATION SHEET

Reference No. of Document Being Continued Page of

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

SUPPLEMENTAL INFORMATION

Buyer Name: NICHOLAS M. ZANE

Buyer Office Symbol/Telephone Number: ZGAA/(586)461-1238

Type of Contract 1: Firm Fixed Price

Kind of Contract: Supply Contracts and Priced Orders

*** End of Narrative A0000 ***

The purpose of amendment 0003 to solicitation SPRDL1-20-Q-0093 is to incorporate the following into the RFQ:

1) To extend the closing date from 28 May 2020 @ 1130 PM EST to 12 Jun 2020 @ 1130 PM EST.

2) The new closing date is 12 Jun 2020 @ 1130 PM EST.

3) To amend the basic quantity of CLIN 0001AA from 5 units to 10 units.

4) To remove option CLIN 0002AA.

5) To change FOB from Destination to Origin with updated clasuses and narritives to reflect so.

6) All other terms and conditions of the basic contract remain unchanged and in full force and effect.

*** END OF NARRATIVE A0004 ***

2 18

SPRDL1-20-Q-0093

PIIN/SIIN

Page of

Name of Offeror or Contractor:

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

Reference No. of Document Being Continued

MOD/AMD

SUPPLIES OR SERVICES AND PRICES/COSTS

0001 POWER SUPPLY

NSN: 6130-01-627-2487

Mfr CAGE: 19207

Mfr Part Number: 12522783

0001AA Production Quantity 10 EA $ $ ___________________ ______________ __________________

COMMODITY NAME: POWER SUPPLY

CLIN CONTRACT TYPE:

Firm Fixed Price

PRON: EH0C0300EH PRON AMD: 02

Description/Specs./Work Statement _________________________________

TOP DRAWING NR: 12522783

DATE: 22-JAN-2020

Packaging and Marking _____________________

PACKAGING/PACKING/SPECIFICATIONS:

SEE SPECIAL PACKAGING INSTRUCTIONS

INTERMEDIATE PACK: 001

LEVEL PRESERVATION: Military

LEVEL PACKING: B

Inspection and Acceptance _________________________

INSPECTION: Origin ACCEPTANCE: Origin

Deliveries or Performance _________________________

DOC SUPPL

REL CD MILSTRIP ADDR SIG CD MARK FOR TP CD ______ ________ ______ ______ ________ _____

001 W56HZV9343052Z W562RP J 2

DEL REL CD QUANTITY DAYS AFTER AWARD __________ ______________ ________________

001 10 0530

FOB POINT: Origin

SHIP TO:

(W562RP) SR ARMY GENERAL SUPPLY LMP STOCK RE

DLA DISTRIBUTION ANNISTON

7 FRANKFORD AVE 362

ANNISTON,AL,36201-4199

0002AA DELETED _______

3 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

DELIVERIES OR PERFORMANCE

Status Regulatory Cite Title Date Status Regulatory Cite Title Date _______ _______________ ______________________________________________________________________ ____________ _______ _______________ ______________________________________________________________________ ____________

1 ADDED 52.247-29 F.O.B. ORIGIN FEB/2006

2 DELETED 52.247-48 F.O.B. DESTINATION--EVIDENCE OF SHIPMENT FEB/1999

3 ADDED 52.247-58 LOADING, BLOCKING, AND BRACING OF FREIGHT CAR SHIPMENTS APR/1984

4 ADDED 52.247-59 F.O.B. ORIGIN--CARLOAD AND TRUCKLOAD SHIPMENTS APR/1984

5 ADDED 52.247-65 F.O.B. ORIGIN, PREPAID FREIGHT--SMALL PACKAGE SHIPMENTS JAN/1991

F.1 Delivery Schedule_____________________

(a) Delivery under this contract must conform to the required schedule specified below, unless acceleration is acceptable.

(b) DEFINITIONS:

(1) DAYS means the number of days after the date of contract award when you must deliver the stated quantity (QTY) of supplies.

(2) DELIVERY is defined as follows:

FOB Origin - Contractor is required to deliver its shipment as provided in FAR 52.247-29(a)(1)-(4) by the time specified in the individual contract; or

FOB Destination - Contractor is required to deliver its shipment as provided in FAR 52.247-34(a)(1)-(2) by the time specified in the individual contract. The contractor must take into consideration the length of time necessary to deliver its shipment to the destination designated in the contract, to ensure that the item reaches its destination by the time reflected in the contract.

(c) The Government requires delivery to be made according to the following schedule:

(1) GOVERNMENT REQUIRED DELIVERY SCHEDULE WITH FIRST ARTICLE TEST (FAT)

ITEM NO. QTY WITHIN DAYS AFTER DATE OF CONTRACT AWARD

N/A N/A N/A

(2) GOVERNMENT REQUIRED DELIVERY SCHEDULE IF THERE IS NO FIRST ARTICLE TEST (FAT), OR IF FAT IS WAIVED

ITEM NO. QTY WITHIN DAYS AFTER DATE OF CONTRACT AWARD

0001AA 10 Ea. 530 Days

(d) Accelerated delivery schedule IS acceptable.

(e) If an accelerated delivery schedule is not acceptable, the required delivery schedule above will apply. If it is acceptable, you may propose an accelerated delivery schedule at no additional cost; fill in the appropriate information here:

(1) OFFERORS PROPOSED ACCELERATED DELIVERY SCHEDULE WITH FIRST ARTICLE TEST (FAT)

ITEM NO. QTY WITHIN DAYS AFTER DATE OF CONTRACT AWARD

(2) OFFERORS PROPOSED ACCELERATED DELIVERY SCHEDULE WITHOUT FIRST ARTICLE TEST (FAT), or IF FAT IS WAIVED

ITEM NO. QTY WITHIN DAYS AFTER DATE OF CONTRACT AWARD

************ End of Narrative F.1 ************

4 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

F.2 Guaranteed Shipping Characteristics_______________________________________

(a) The offeror is requested to complete subparagraph (a)(1) of this clause, for each part or component which is packed or packaged separately. This information will be used to determine transportation costs for evaluation purposes. If the offeror does not furnish sufficient data in subparagraph (a)(1) of this clause, to permit determination by the Government of the item shipping costs, evaluation will be based on the shipping characteristics submitted by the offeror whose offer produces the highest transportation costs or in the absence thereof, by the Contracting Officers best estimate of the actual transportation costs. If the item shipping costs, based on the actual shipping characteristics, exceed the item shipping costs used for evaluation purposes, the Contractor agrees that the contract price shall be reduced by an amount equal to the difference between the transportation costs actually incurred, and the costs which would have been incurred if the evaluated shipping characteristics had been accurate.

(1) To be completed by the offeror:

(i) Type of container: Wood Box ___, Fiber Box ___, Barrel ___, Reel ___, Drum ___, Other (Specify) _________;

(ii) Shipping configuration: Knocked-down ___, Set-up ___, Nested ___, Other (specify) _____________;

(iii) Size of container: ____ (Length), x ___ (Width), x ___ (Height) = ___ Cubic Ft;

(iv) Number of items per container ________ each;

(v) Gross weight of container and contents ____ Lbs;

(vi) Palletized/skidded ___Yes ___ No;

(vii) Number of containers per pallet/skid ______;

(viii) Weight of empty pallet bottom/skid and sides _______ Lbs;

(ix) Size of pallet/skid and contents _______ Lbs Cube ________;***

(***For item (ix), use the following to calculate the data:

a. To calculate Lbs in item (ix) above: [(v) x (vii)] + (viii)

b. To calculate Cube in item (ix) above: provide length, width and height of loaded pallet in inches. This should be greater than item (iii).)

(b) The guaranteed shipping characteristics requested in subparagraph (a)(1) of this clause do not establish actual transportation requirements, which are specified elsewhere in this solicitation. The guaranteed shipping characteristics will be used only for the purpose of evaluating offers and establishing any liability of the successful offeror for increased transportation costs resulting from actual shipping characteristics which differ from those used for evaluation in accordance with paragraph (a) of this clause.

************ End of Narrative F.2 ************

F.5 DEPOT ADDRESS FOR THE APPLICABLE MODE OF SHIPMENTS: IN-THE-CLEAR ADDRESSES______________________________________________________________________________

Rail/ Motor SPLC*: 206721 and 209405

MILSTRIP Address Code: W2561U

Rail Ship to: Transportation Officer

Defense Dist. Depot

Susquehanna

New Cumberland, PA

Motor Ship to: Transportation Officer

Defense Dist. Depot

Susquehanna

New Cumberland, PA

Parcel Post Mail to: Transportation Officer

5 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Defense Dist. Depot

Susquehanna

New Cumberland, PA 17070-5001

NOTE: All deliveries to New Cumberland MUST be scheduled at least 10 days prior to the delivery date. The carrier or contractor must call the New Cumberland DDSP customer service number, 800-307-8496 and provide the following information: contract number, item name, National Stock Number, total weight and cube, and vendor. All shipments to this MILSTRIP address code (W25G1U) are for mission stock and they will need to know that as well, but if you have instructions from the Contracting Officer to use MILSTRIP address code W25N14 instead, you must inform the appointment-taker that the delivery is for Consolidation and Containerization Point (CCP) stock.

Appointments for FOB Origin shipments should be coordinated with DCMA Transportation.

Rail/ Motor SPLC*: 875670 and 875675

MILSTRIP Address Code: W62G2T

Rail Ship to: Transportation Officer

XU Def Dist. Depot

San Joaquin

2600 S. Chrisman Rd.

Rec Whse 10

Tracy, CA 95376-5000

Motor Ship to: Transportation Officer

XU Def Dist. Depot

San Joaquin

2600 S. Chrisman Rd.

Rec Whse 10

Tracy, CA 95376-5000

Parcel Post Mail to: Transportation Officer

Dist. Depot San Joaquin

P.O. Box 96001

Stockton, CA 95296-0130

Rail/ Motor SPLC*: 471995 and 471996

MILSTRIP Address Code: W31G1Z

Rail Ship to: Transportation Officer

Anniston Army Depot

Bynum, AL

Motor Ship to: Transportation Officer

Anniston Army Depot

Bynum, AL

Parcel Post Mail to: Transportation Officer

Anniston Army Depot

Bynum, AL 36201-5021

Rail/ Motor SPLC*: 209741 and 209770

MILSTRIP Address Code: W25G1R

Rail Ship to: Transportation Officer

Letterkenny Army Depot

Culbertson, PA

Motor Ship to: Transportation Officer

Letterkenny Army Depot

Chambersburg, PA

6 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

Parcel Post Mail to: Transportation Officer

Letterkenny Army Depot

Chambersburg, PA 17201-4150

Rail/ Motor SPLC*: 661136 and 661157

MILSTRIP Address Code: W45G19 and W562RM

Rail Ship to: Transportation Officer

Red River Army Depot

Defense, TX

Motor Ship to: Transportation Officer

Red River Army Depot

Texarkana, TX

Parcel Post Mail to: Transportation Officer

Red River Army Depot

Texarkana, TX 75507-5000

NOTE: Drivers must schedule an appointment for delivery at least 24 hours in advance. Deliveries will be scheduled for Monday-Friday, 0700-1300. E-mail or fax the PCO at CML (903)334-2208 or CML (903)334-2881. POC's are available Monday-Saturday, 0700-1730 with the exception of government holidays. For directions, please call CML (903)334-3060. Trucks enter through the commercial carrier route entrance and report to building 23 Truck Control 30 minutes prior to their scheduled appointment. Carriers that arrive at Truck Control without appointments will be placed at the end of the day's schedule unless there is an earlier opening and will be worked/unloaded as soon as possible.

POCs: ddrt-appt@dla.mil, Randy Cox, CML (903)334-2945, "mailto:Randy.Cox@dla.mil "

Angela Carr, CML (903)334-4950 "mailto:Angela.Carr@dla.mil "

Jane Haley, CML (903)334-4671 "mailto:Jane.Haley@dla.mil "

Darlene Phelps, CML (903)334-3818 "mailto:Darlene.Phelps@dla.mil " .

Rail/ Motor SPLC*: 764538 and 764535

MILSTRIP Address Code: W67G23

Rail Ship to: Transportation Officer

Tooele Army Depot

Warner, UT

Motor Ship to: Transportation Officer

Tooele Army Depot

Warner, UT

Parcel Post Mail to: Transportation Officer

Tooele Army Depot

Warner, UT 84074-5003

*** SPLC indicates Standard Point Locator Code.

NOTE: The following is applicable only when so specified in an individual order or delivery increment:

This requirement is a depot replenishment buy, a portion of which is or may be required to fill Direct Support System (DSS) requisitions. Shipment shall be made, as specified, to one or more of:

New Cumberland Army Depot

Red River Army Depot

Sharpe Army Depot

7 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

prior to shipments to any other depots as may be designated. When more than one depot is designated for DSS shipments, priority shipments will be made equally to each of the designated destinations.

************ End of Narrative F.5 ************

F.6 FOB Point_____________

Delivery on F.O.B. origin offers will be F.O.B. Carrier's equipment, wharf, or freight station, at the Government's option, at or near:

(1) Contractor's Plant:

(City) (State) (ZIP) (County)

(2) Subcontractor's Plant:

(City) (State) (ZIP) (County)

************ End of Narrative F.6 ************

F.9 Transportation Data for FOB Origin Offers_____________________________________________

(a) Provide the following information for us to use in selecting the most favorable mode of shipment. We'll also use this information in our evaluation of transportation costs.

Offeror represents that: ________________________

(1) Facilities for shipping by rail

[ ] are

[ ] are not available at the F.O.B. point(s) stated in this solicitation.

(2) If rail facilities are not available at the F.O.B. point(s), the name and location of the nearest team track is:

NAME) (LOCATION)

(3) Facilities for shipping by water

[ ] are

[ ] are not available at the F.O.B. point(s) stated in this solicitation.

(4) Facilities for shipping by motor

[ ] are

[ ] are not available at the F.O.B. point(s) stated in this solicitation.

(5) If there is a Contractor Reimbursable Loading Charge and you didn't include it in the offered unit price in Section B, please indicate it below, per unit:

RAIL: /Unit MOTOR: /Unit __________ __________

WATER: /Unit __________

8 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CAUTION: GIVE THE COST OF REIMBURSABLE LOADING CHARGE (NOT ALREADY IN THE OFFERED UNIT PRICE) ON A PER UNIT BASIS. THE UNIT

OF MEASURE IS AS INDICATED ON THE SCHEDULE PAGE, SECTION B, UNDER THE UNIT COLUMN.

(b) We will consider any charge listed above in the overall transportation evaluation of this solicitation. Unless you fill-in the above information for loading charges, we will consider all costs associated with loading to be included in the item price offered in Section B. These costs include: (i) loading, (ii) blocking, (iii) bracing, (iv) drayage, (v) switching, or (vi) any other service necessary to effect delivery F.O.B. carrier's equipment you've indicated as available and we specify at time of shipment.

(c) If rail facilities aren't available at the designated F.O.B. point(s), rail won't be used unless directed by the

Administrative Contracting Officer (ACO). If the ACO tells you rail facilities will be used, we'll adjust the contract price by adding the loading charge filled in above for transportation to the nearest rail facility.

(d) IF YOU DO NOT FILL IN AN ADDITIONAL CHARGE FOR RAIL SHIPMENT ABOVE, YOU AGREE THAT THE CONTRACT PRICE ALREADY INCLUDES ALL

CHARGES FOR SUCH SHIPMENTS. THEREFORE, SHIPMENT BY RAIL WILL NOT COST US ANY MORE.

************ End of Narrative F.9 ************

F.11 Shipment of Supplies and Detention of Carriers Equipment_____________________________________________________________

(a) Unless otherwise directed, shipment items under this contract in following order of priority:

(1) Government/Commercial Bill(s) of Lading or US Postal Services;

(2) Prepaid Commercial Bill(s) of Lading with transportation charges entered as a separate item on the invoice; or

(3) As otherwise instructed when the contract prohibits use of Government funds for transportation costs.

(b) The Contractor will request:

(1) Government Bills of Lading and

(2) Routing and other instructions, including Defense Transportation Regulation (DTR), DOD Regulation 4500.9-R-Part 2 Cargo

Movement, as to the methods of shipment to be followed by the Contractor, or

(c) The Contractor and subcontractor(s) must allow prompt and convenient access of carrier's equipment to loading docks or platforms where the contract items supplies will be loaded. Any charges for detention of carrier's equipment shall be for the account of the Contractor, except when the detention is required or caused by the Government.

************ End of Narrative F.11 ************

*** END OF NARRATIVE F0001 ***

9 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT ADMINISTRATION DATA

G.2 Transportation Account Code (TAC) for FOB Origin Shipment_____________________________________________________________

DCMA: The TAC to use in GBL preparation for shipments made under this contract is AUER.

************ End of Narrative G.2 ************

*** END OF NARRATIVE G0001 ***

10 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

CONTRACT CLAUSES

6 ADDED 252.247-7028 APPLICATION FOR U.S. GOVERNMENT SHIPPING DOCUMENTATION/INSTRUCTIONS JUN/2012

7 CHANGED 52.247-1 COMMERCIAL BILL OF LADING NOTATIONS FEB/2006

When the Contracting Officer authorizes supplies to be shipped on a commercial bill of lading and the Contractor will be reimbursed these transportation costs as direct allowable costs, the Contractor shall ensure before shipment is made that the commercial shipping documents are annotated with either of the following notations, as appropriate:

(a) If the Government is shown as the consignor or the consignee, the annotation shall be:

Transportation is for the DLA Land Warren and the actual total transportation charges paid to the carrier(s) by the consignor or consignee are assignable to, and shall be reimbursed by, the Government.

(b) If the Government is not shown as the consignor or the consignee, the annotation shall be:

Transportation is for the DLA Land Warren and the actual total transportation charges paid to the carrier(s) by the consignor or consignee shall be reimbursed by the Government, pursuant to cost-reimbursement contract: N/A. This may be confirmed by contacting the

Contract Administration Office (DCMA) listed in the contract.

(End of Clause)

I.3 Mandatory Use of Contractor to Government Electronic Communication______________________________________________________________________

(a) All references in the contract to the submission of written documentation shall mean electronic submission.

(b) This shall include all written unclassified communications between the Government and the Contractor except contract awards and contract modifications which shall be posted on the internet. Return receipt shall be used if a commercial application is available. Classified information shall be handled in full accordance with the appropriate security requirements.

(c) The Contractor shall designate the personnel with signature authority who can contractually bind the contractor. All binding contractor communication shall be sent from this contractor e-mail address(es).

(d) Upon award, the Contractor shall provide the Contracting Officer with a list of e-mail addresses for all administrative and technical personnel assigned to this contract.

(e) Unless exempted by the Procuring Contracting Officer in writing, all unclassified written communication after contract award shall be transmitted electronically.

************ End of Narrative I.3 ************

*** END OF NARRATIVE I0001 ***

11 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

INSTRUCTIONS, CONDITIONS, AND NOTICES TO OFFERORS

8 ADDED 52.247-46 SHIPPING POINT(S) USED IN EVALUATION OF F.O.B. ORIGIN OFFERS APR/1984

L.3 Handcarried Offers______________________

(a) Unless specifically authorized elsewhere in this solicitation, paper offers will not be accepted. The term "handcarried offers" generally refers to offers contained on electronic media, which we recognize may be delivered "by hand." Handcarried offers must be delivered to Building 255. _________

(b) Handcarried offers, including disks or other electronic media, shall be addressed to: _________

DLA Warren c/o US Army TACOM-LCMC

Contracting Center

Offer Receipt Office, Building 231, Room 1300, AMSCC-TAC-HMG

6501 East 11 Mile Road

Warren, MI. 48397-0001

(c) Offers shall not be addressed to an individual buyer. All offers must be addressed to the Offer Receipt Office at the above _____________________________________________________________________________________________________________________________ address.________

(d) The external delivery envelope or wrapper must be marked with the solicitation number and the date and time of the solicitation closing. Each envelope should contain only one offer. ___________________________________________

(e) Handcarried offers must be delivered to Building 255. Directions to TACOM: From Van Dyke Avenue, travel westbound on 11 Mile _________

Road; enter the first Arsenal gate immediately west of the railroad tracks on the north side of the street. Take an immediate right and follow security officer directions to the Receiving Dock in Building 255. The driver may need to obtain a visitors badge, and must be a

US citizen. The Government will forward the package to the Offer Receipt Office in Building 231.

(f) Offerors must ensure that the commercial carrier they use has a tracking system that can provide documentation of the date and time of delivery to the Government. For handcarried offers delivered by other than a commercial carrier, the offeror must ensure that the delivery person obtains a signature from Receiving Dock personnel on a receipt that shows the date and time of delivery to the

Government. The delivery person must provide the receipt since Receiving Dock personnel do not have them.

(g) Packages must be delivered to Building 255 between the hours of 8:00 am and 3:00 pm local time.

************ End of Narrative L.3 ************

L.4 Data and Communications Submitted to the Government Electronically________________________________________________________________________

(a) The Government often employs contractors as system administrators to operate and maintain Government computer systems. These systems include local area networks, web sites, databases, other electronic records, e-mail accounts, other electronic data transfer mechanisms and computer software. The employees of these contracted system administrators sign nondisclosure agreements obligating them not to reveal information contained in files, documents, computers or systems that they administer. However, unless such information is protected in some way, contracted system administrators do have the ability to access such information.

(b) Potential contractors as well as any other parties are thus advised to take steps needed to prevent access by contracted system administrators to information submitted electronically to the Government. Absent such steps, it is assumed that contracted system administrators are permitted the capability to access the data. The access will be limited to that which is necessary for the contract system administrator to perform its duties for the Government. The access shall be subject to the condition that third party information is not to be revealed by the contracted system administrator.

************ End of Narrative L.4 ************

L.5 Source Notes on Drawings Conform to Mil Tech Data Requirements_____________________________________________________________________

Notwithstanding the fact that ordnance drawings furnished with this solicitation may list particular manufacturer part numbers as approved sources, or as being the same as, or equivalent to, the ordnance part described on the drawing, the item to be supplied under this solicitation must conform to all specific technical requirements expressed on such drawing(s). To the extent that there may be any inconsistency between a manufacturer's part number and specific technical requirements expressed on an ordnance drawing which references the manufacturer's part number, the specific technical requirements shall control and take precedence. Offerors shall bear

12 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

the responsibility of verifying that the approved part as supplied will conform with all such specific technical requirements.

************ End of Narrative L.5 ************

L.6 Notice Regarding Required Manufacturers Part Number_______________________________________________________

(a) Please see the provision entitled ACQUISITION OF MANUFACTURER'S PART NUMBER in this solicitation. As stated there, this acquisition is restricted to the manufacturer's part number or numbers identified in the Schedule (Section B), or in the Technical Data

Package. Thus, with the exceptions described in paragraph b. below, and in the provision entitled REPRESENTATION OF INTENT TO SUPPLY A

SOURCE-CONTROLLED ITEM, offers that propose to furnish any alternative to the required manufacturer's part number(s) will not be considered for contract award. It is understood that, by submitting an offer under this solicitation, offeror agrees to supply one of the required part numbers unless he meets the conditions set forth either in paragraph (b) below or in the provision entitled

REPRESENTATION OF INTENT TO SUPPLY A SOURCE-CONTROLLED ITEM.

(b) Required Approval for Equivalent Items

(1) If a firm manufacturers an item which it believes to be totally equivalent to the required item(s), it may submit an offer based on the equivalent item if the following conditions are met:

(i) Prior to receipt of this solicitation, the firm must have received written TACOM approval of a test procedure on its _____ nonlisted item.

(ii) The firm must indicate in its offer the date of the written TACOM approval of its test procedure, and the name and title of the approving official.

(iii) The firm indicates in its offer that it is in the process of having its item independently tested per the approved test procedure to demonstrate full physical, functional, and mechanical interchangeability of its part with an already approved part cited in this solicitation, or that it is awaiting final TACOM engineering approval of the summary report furnished at the conclusion of independent testing; and

(iv) The firm must have secured final written approval of its part from TACOM engineering by the time of bid opening, (in the case of formally advertised acquisitions), or by the time of contract award, (in the case of negotiated acquisitions).

(2) Notwithstanding the foregoing, the Government expressly reserves to the Procuring Contracting Officer the right to waive the conditions set forth in paragraph (b)1 above in making an award when it is clearly established, in his sole discretion, that written approval from TACOM engineering of a nonlisted part number can be obtained without delay in the anticipated date of award.

When the foregoing conditions are met, the Government reserves the right to make an award for a nonlisted item. In no other instance will award be made to any firm that does not agree to furnish one of the required part numbers listed in this solicitation.

(c) Any firm that manufactures or regularly sells an item which it views as equivalent in all respects to one of our required part numbers, but that has not initiated approved qualification testing in order to demonstrate that its part is totally equivalent to the required part, should see the notice entitled PART NUMBERS NOT CURRENTLY APPROVED, located elsewhere in this Section L.

************ End of Narrative L.6 ************

L.8 Notice Regarding Source-Controlled Contract Items_____________________________________________________

(a) The drawings in the Technical Data Package for this requirement contain reference notes indicating one or more sources of supply that have previously furnished the items depicted on the drawings. Such notes also specify some sort of approval requirement, typically phrased in one of the following ways:

(1) or equal

(2) or approved substantial equal

(3) Ordnance Corps approval required

(4) Ordnance Corps engineering approval required

(b) With the exceptions described in paragraph (c) below, and in the provision entitled REPRESENTATION OF INTENT TO SUPPLY A

SOURCE-CONTROLLED ITEM), the listing of sources of supply on drawings with such approval requirements means that only those listed sources may furnish the items depicted on such drawings. Thus, any offeror responding to this solicitation and not meeting the exception criteria set forth herein will be deemed to have agreed to furnish the contract item from a listed source.

13 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

(c) Required Approval for Nonlisted Part Number:

(1) When the following conditions are met, the Government reserves the right to consider and accept an offer conditioned on a manufacturer's part number not cited in the Technical Data Package. In order to be eligible for such consideration, any firm offering a nonlisted part number must:

-- have received, prior to receipt of this solicitation, written TACOM approval of a test plan on its item, designed to _____ demonstrate that the nonlisted part is physically, functionally, and mechanically interchangeable with the listed part number(s) cited herein;

-- indicate in its offer the date of the formal TACOM approval of the test plan, and the name and title of the approving official;

-- be in the process of having its nonlisted part number tested by an independent testing facility under the terms of the approved plan, or be awaiting final TACOM engineering approval of the summary report furnished at the conclusion of testing; and

-- have secured final written approval of its part from TACOM engineering by the time of bid opening, in the case of formally advertised acquisitions), or by the time of contract award, (in the case of negotiated acquisitions).

(2) Notwithstanding the foregoing, the Procuring Contracting Officer has the right to waive the above conditions in making an award when it is clearly established, in his sole discretion, that written approval from TACOM engineering can be obtained without delay in the anticipated date of award.

(d) Any firm that cannot comply with conditions in paragraph (c) above upon submission of its offer under this solicitation, but that believes one of its part numbers to be equivalent to the approved part number(s) cited in this solicitation, is invited to begin the qualification procedure to gain approval of such nonlisted part number for purposes of future acquisition action. Please see the provision entitled PART NUMBERS NOT CURRENTLY APPROVED, which is located elsewhere in this Section L.

************ End of Narrative L.8 ************

L.11 Acquisition of New Facilities, Special test Equipment or Special Tooling_____________________________________________________________________________

(a) It is not the intent of the Government to acquire, or to have acquired for its account, any facilities, special test equipment, or special tooling as those terms are defined below. The Government shall under no circumstances reimburse the offeror for the cost of any new facilities, special test equipment, or special tooling as a separate item. An offeror may, however, amortize the cost of any such facilities, special test equipment, or special tooling it may require in the submitted price of the items. Such facilities, special test equipment or special tooling shall not be subject to Government option rights to take title to the same except as specified in the

DEFAULT, TERMINATION FOR THE CONVENIENCE OF THE GOVERNMENT, and/or PROGRESS PAYMENT clauses of this contract.

(b) As used in this solicitation/contract, FACILITIES means industrial property (other than material, special tooling, military property, and special test equipment) for production, maintenance, research, development, or test, including real property and rights in it, buildings, structures, improvements, and plant equipment.

(c) As used in this solicitation/contract, SPECIAL TEST EQUIPMENT means either single or multipurpose integrated test units engineered, designed, fabricated, or modified to accomplish special purpose testing in the performance of the contract. Such testing units comprise electrical, electronic, hydraulic, pneumatic, mechanical, or other items or assemblies of equipment, that are mechanically, electrically, or electronically interconnected so as to become a new functional entity, causing the individual item or items to become interdependent and essential in the performance of special purpose testing in the development or production of particular supplies or services. The term SPECIAL TEST EQUIPMENT does not include: (1) material; (2) special tooling; (3) buildings and non-everable structures (except foundations and similar improvements necessary for the installation of special test equipment); and (4) plant equipment items used for general plant testing purposes.

(d) As used in this solicitation/contract, SPECIAL TOOLING means all jigs, dies, fixtures, molds, patterns, taps, gauges, other equipment and manufacturing aids, and their replacements, which are of such a specialized nature that, without substantial modification or alteration, their use is limited to the development or production of particular supplies or parts of them, or the performance of particular services. The term includes all components of such items, but does not include: (1) material; (2) special test equipment;

or (3) buildings, and non-severable structures (except foundations and similar improvements necessary for the installation of special tooling), general or special machine tools, or similar capital items.

************ End of Narrative L.11 ************

L.12 Part Numbers Not Currently Approved________________________________________

14 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

As specified elsewhere in this solicitation, part or all of the contract item to be procured is restricted to certain approved manufacturer's part numbers as set forth in the Schedule and/or the Technical Data Package. Any firm that produces an item which it believes to be equivalent to one of these approved part numbers is encouraged to have such item tested and approved, so that the item will be eligible to be bought on future acquisitions. Please write to the attention of the buyer at the email address indicated on the cover page of this solicitation and request a statement of the procedures by which items can be tested and approved for procurement.

Such an enquiry should cite the applicable National Stock Number (NSN), the already approved part number, the part number of the item which the enquirer believes to be identical to our approved item, and a brief statement of the basis on which the new item is believed to be equivalent to our already approved item.

************ End of Narrative L.12 ************

L.13 Reverse Auction_____________________

The Contracting Officer may utilize on-line reverse auctioning as a means of conducting price discussions under this solicitation. If the Contracting Officer does not conduct a reverse auction, award may be made on the basis of initial offers or following discussions not using reverse auctioning as a pricing technique. If the Contracting Officer decides to use on-line reverse auctioning to conduct price negotiations, the Contracting Officer will notify offerors of this decision and the following provisions will apply.

(a) The award decision will be made in accordance with the evaluation factors as set forth in the solicitation. The reverse on-line auction will be used as a pricing technique during discussions to establish the final offered prices from each offeror. These prices will be used in conjunction with the evaluation factors stated elsewhere in the solicitation in order to make the award decision in accordance with the basis for award stated in the solicitation.

(b) Following the decision to conduct discussions using on-line reverse auctioning as a pricing technique, the Contracting Officer or his/her representative will provide offerors determined to be in the competitive range with information concerning the on-line auction process. The Government intends to use a commercial web-based product to conduct the reverse auction.

(c) Prior to or simultaneously with conducting the on-line reverse auction, the Contracting Officer may hold discussions with the offerors concerning matters appropriate for discussion, such as issues involving technical proposals or unbalanced pricing.

(d) The lowest offerors price(s) for each round of the reverse auction will be disclosed to other offerors and anyone else having authorized access to the on-line auction. This disclosure is anonymous, meaning that each offerors identity will be concealed from other offerors (although it will be known to the Government; only a generic identifier will be used for each offerors proposed pricing, such as Offeror A or lowest-priced offeror). By submitting a proposal in response to the solicitation, offerors agree to participate in the reverse auction and that their prices may be disclosed, including to other offerors, during the reverse auction.

(e) The reverse auction system currently in use designates offers as "Lead," meaning the current low price in that auction, or "Not

Lead," meaning not the current low price in that auction. In the event of a tie offer, the reverse auction provider's system designates the first offer of that price as "Lead" and the second or subsequent offer of that price as "Not Lead." Offerors shall not submit a tie offer, since this is inconsistent with the purpose of the reverse auction. If a tie offer is submitted, the "Not Lead" offeror that submitted the tie offer must offer a changed price; it will be ineligible for award if the final price in the auction is the tie offer price.

(f) An offerors final auction price at the close of the reverse auction will be considered its final proposal revision. No price revisions will be accepted after the close of the reverse auction, unless the Contracting Officer decides that further discussions are needed and final proposal revisions are again requested in accordance with Federal Acquisition Regulation (FAR) 15.307, or the ______

Contracting Officer determines that it would be in the best interest of the Government to re-open the auction.

(g) The following information is provided regarding the procedures to be followed if a reverse auction is conducted.

(1) Each offeror identified by the Contracting Officer as a participant in the reverse auction will be contacted by Defense Logistic

Agencys commercial reverse auction service provider to advise the offeror of the event and to provide an explanation of the process.

(2) In order for an Offeror to participate in the reverse auction, such offeror must agree with terms and conditions of the entire solicitation, including this provision, and agree to the commercial reverse auction service providers terms and conditions for using its service. Information concerning the reverse auction process and the commercial service providers terms and conditions is embedded within the email notification sent by the on-line reverse auction pricing tool system administrator.

(3) Offerors shall secure the passwords and other confidential materials provided by the commercial reverse auction service provider or the Government and ensure they are used only for purposes of participation in the reverse auction. Offerors shall keep their own and other offerors pricing in confidence until after contract award.

(4) Any offeror unable to enter pricing through the commercial reverse auction service providers system during a reverse auction must notify the Contracting Officer or designated representative immediately. The Contracting Officer may, at his/her sole discretion, extend or re-open the reverse auction if the reason for the offerors inability to enter pricing is determined to be without fault on the part of the offeror and outside the offerors control.

(5) The reverse auction will be conducted using the commercial reverse auction service providers website as embedded in the email notification. Offerors shall be responsible for providing their own computer and internet connection.

(6) Training:

(i) The commercial reverse auction service provider will provide familiarization training to offerors employees; this training may be provided through written material, the commercial reverse auction service providers website, and/or other means.

(ii) An employee of an offeror who successfully completes the training shall be designated as a 'trained offeror.' Only trained offerors may participate in a reverse auction. The Contracting Officer reserves the right to request that offerors provide an alternate offeror

15 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

employee to become a 'trained offeror.' The Contracting Officer also reserves the right to take away the 'trained offeror' designation from any trained offeror who fails to abide by the solicitations or commercial reverse auction service providers terms and conditions.

************ End of Narrative L.13 ************

L.15 Agency Protests____________________

Companies protesting this procurement may file a protest 1) with the contracting officer, 2) with the General Accounting Office, or 3) pursuant to Executive Order No. 12979, with the Agency for a decision by the Activity's Chief of the Contracting Office. Protests filed with the agency should clearly state that they are an "Agency Level Protest under Executive Order No. 12979." (Note: DLA procedures for

Agency Level Protests filed under Executive Order No. 12979 allow for a higher level decision on the initial protest than would occur with a protest to the contracting officer; this process is not an appellate review of a contracting officer's decision on a protest previously filed with the contracting officer). Absent a clear indication of the intent to file an agency level protest, protests will be presumed to be protests to the contracting officer.

NOTE: DLA Agency Protests for DLA Warren shall be filed with:

Chief of the Contracting Office

DLA Land Warren

Mail Stop 729; ZG

6501 E. Eleven Mile Road

Warren, MI 48397-5000

Contracting Officer Protests shall be submitted to the Contracting Officer designated in the solicitation or award.

************ End of Narrative L.15 ************

L.23 Offerors Quality Assurance System_______________________________________

(a) This solicitation will result in a contract that will require the contractor to use a quality-assurance system to ensure the quality of the contract items.

(b) To allow DLA Land Warren to analyze your proposed quality system, especially if that system is not based on a national or international standard, you must identify your system as part of your response to this solicitation.

(1) If the Government is requiring ISO 9001:2000 (tailored: delete paragraph 7.3) where you will be required to supply conforming product to an established design, and your quality system conforms to ISO 9002, MIL-I-45208 or another comparable specification or standard, this is sufficient description: you need not further describe your quality system in response to this solicitation.

(2) If the Government is requiring ISO 9001:2000 (untailored) where your capability to design and supply conforming product needs to be demonstrated, and your quality system conforms to ISO 9001, MIL-Q-9858, or another comparable specification or standard, this is sufficient description: you do not need to further describe your quality system in your response to this solicitation.

Note: If the Government is requiring ISO 9001:2000 (untailored), quality systems conforming to ISO 9002 or MIL-I-45208 or comparable quality systems are not acceptable for this contract.

(3) If your quality system does not conform to any of the standards listed immediately above, identify the name of the quality system you intend to use and provide a description of your proposed system in enough detail to let us assess its suitability for use in performing the resulting contract. This is of particular importance if your proposed system is unique, using quality control methods and techniques that your company has developed in-house.

(4) If you provide a description of your quality system, make sure that your description covers how your system:

(i) Achieves defect prevention, and

(ii) Provides process control, and

(iii) Ensures adequate quality controls throughout all areas of contract performance.

If some of the features of your system are described in other forms (brochures, for example, or articles), you may attach a copy of such items to your response to this solicitation. If your system is described in a textbook or publication that is available from a commercial or academic distributor, include a reference to the publication by author, title, copyright date, and publisher in your

16 18

Name of Offeror or Contractor:

PIIN/SIIN MOD/AMD

system description. You need not physically attach a copy of a textbook to your offer.

(c) If you already described your quality system as an attachment to another DLA Land Warren solicitation within the previous 90 days, you can either send us another copy, or simply identify the number of the previous solicitation.

(d) If you do not provide us a description of your quality system, or if the description you send does not show all of the required features as stated in paragraph (b) above, your offer may be ineligible for contract award.

************ End of Narrative L.23 ************

L.24 Notice of Offerors Intending to Offer Other Than New Material___________________________________________________________________

(a) We intend to acquire only new material. Unless this contract otherwise requires virgin material or supplies composed of, or manufactured from, virgin material, the contractor shall provide supplies that are new, as defined in this clause.

(b) Definitions:

(1) "New" means composed of previously unused components, whether manufactured from virgin material, recovered material in the form of raw material, or materials and by-products generated from, and reused within, an original manufacturing process; provided that the supplies meet contract requirements, including but not limited to, performance, reliability, and life expectancy.

(2) "Reconditioned" means restored to the original normal operating condition by readjustments and material replacement.

(3) "Recovered material" means waste materials and by-products that have been recovered or diverted from solid waste including post-consumer material, but such term does not include those materials and by-products generated from, and commonly reused within, an original manufacturing process.

(4) "Remanufactured" means factory rebuilt to original specifications.

(5) "Virgin material" means previously unused raw material,including previously unused copper, aluminum, lead, zinc, iron, other metal or metal ore, or any undeveloped resource that is, or with new technology will become, a source of raw materials

(6) "Residual Inventory" means inventory from a transferred or terminated Government or commercial contract.

(c) Used, reconditioned, remanufactured supplies, unused former Government surplus property, or residual inventory shall not be used unless the contractor has proposed the use of such supplies, and the Contracting Officer has authorized their use.

(d) Offers to provide other than new material shall be submitted to the Contracting…