SPI - AK16236727.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved

OMB No. 0704-0188 -BK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. 2. CAGE 3. SPI NO. PART OR DRAWING NO. (CAGE) NOMENCLATURE

( ) CYLINDER ASSEMBLY,

OSCILLATION

19207 AK16236727

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-623-6727 / /201

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 18.2 0.370 18.4 X 6.1 X 5.7

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTIONMIL-STD-2073-1D, METHOD 20

13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-10924

MIL-STD-2073-1D 2-C A/R CAPS/PLUGS: NAS-847

14. DRYING 3-D 1 WRAP: MIL-PRF-121, TY II, SIZE: 22 X 24

MIL-STD-2073-1D 4-E 32 CUSHIONING: ASTM-D4727, TY CF, CL WR,

15. PACKING

GR V3c, VR DW

5-F 1 CONTAINER: ASTM-D5118, TY CF, ST FOL, CL WR,

a. LEVEL A GR W5c, VR SW, SIZE: 18 X 5-1/4 X 5-1/4

MIL-STD-2073-1D & NOTE G

b. LEVEL B

MIL-STD-2073-1D & NOTE G

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.

C. SEAL ALL OPENINGS TO ITEMS INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.

D. WRAP ITEM ENTIRELY WITH PAPER, SECURE WITH TAPE ASTM-D6123.

E. SEE PAGES 2 – 5 FOR SIZES AND ORIENTATION, SECURE BUNDLES OF PADS TOGETHER USING GOOD

QUALITY ADHESIVE.

F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B3.

G. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

( ) CYLINDER ASSEMBLY, 19207 AK16236727

44.. NNAATTIIOONNAALL SSTTOOCCKK NNOO.. 55.. DDAATTEE 66.. RREEVVIISSIIOONN

3040-01-623-6727 / /201

17. NOTES/DRAWING

ORIENTATION OF CUSHIONING

NOTE: ITEM C COMPRIZES 2 BUNDLES OF 6

ITEM SIZE QTY REFERENCE

A 12-1/2 X 2-1/2 5 ASTM-D4727, TY CF, CL WR, GR V3c, VR DW B 4 X 12-1/2 4 ASTM-D4727, TY CF, CL WR, GR V3c, VR DW C 5-1/4 X 3 12 ASTM-D4727, TY CF, CL WR, GR V3c, VR DW D 2-1/2 X 10-1/4 6 ASTM-D4727, TY CF, CL WR, GR V3c, VR DW E 5-1/4 X 12-1/2 5 ASTM-D4727, TY CF, CL WR, GR V3c, VR DW

A C

B

D

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

( ) CYLINDER ASSEMBLY, 19207 AK16236727

44.. NNAATTIIOONNAALL SSTTOOCCKK NNOO.. 55.. DDAATTEE 66.. RREEVVIISSIIOONN

3040-01-623-6727 / /201

17. NOTES/DRAWING

ORIENTATION OF CYLINDER ASSEMBLY

ORIENTATION OF CUSHIONING ON TOP OF CYLINDER ASSEMBLY

NOTE: WRAP REMOVED FROM PICTURES ON PAGE 3 FOR CLARITY.

B

D

E C