EH9L0311EHCDRL_tacom.docx

CONTRACT DATA REQUIREMENTS LIST

DD FORM 1423 (MECHANIZED)

CATEGORY: MISC

SYSTEM/ITEM: BOX, TURRET POSITION INDICATOR

TO CONTRACT/PR: EH9L0311EH

NSN: 1005-01-101-6250

1. SEQUENCE NUMBER

2. TITLE OF DATA ITEM

3. SUBTITLE

4. DATA ITEM NUMBER

5. CONTRACT REFERENCE

6. TECHNICAL OFFICE

7. DD 250

8. APP CODE

9. DIST STATEMENT REQUIRED

10. FREQUENCY

11. AS OF DATE

12. DATE OF 1ST SUBMISSION

13. DATE OF SUBSEQUENT SUBMISSION

14. DRFT/REG/REPRO/DISTRIBUTION/COPIES

15. TOTAL

16. REMARKS

1. A001

2. ENGINEERING CHANGE PROPOSAL (ECP)

3. N/A

4. DI-SESS-80639

5. SECTION C

6. RDAR-EIS-PD

7. LT

8. N/A

9. SEE BLOCK 16

10. ASREQ

11. N/A

12. ASREQ

13. ASREQ

14. SEE BLOCK 16

15. TOTAL 0 / 2 / 0

16. REMARKS

DATA MUST BE IN GOVERNMENT COMPATIBLE SOFTWARE (e.g., MICROSOFT OFFICE OR PORTABLE DOCUMENT FORMAT (pdf)). *DISTRIBUTION STATEMENT WILL BE ASSIGNED

AND IMPLEMENTED BY THE DOD CONFIGURATION MANAGER. **SUBMIT ELECTRONICALLY TO

usarmy.pica.rdecom-ardec.mbx.ecp-document@mail.mil AND TO THE GOVERNMENT

CONTRACT SPECIALIST. ELECTRONIC FILES SHALL BE LESS THAN 7MB. THE PREFERRED

METHOD IS THE DD FORM 1692 WHICH IS LOCATED AT

http://www.dtic.mil/whs/directives/infomgt/forms/. CONTRACTOR FORMAT

ALTERNATIVE TO THE DD FORM IS ACCEPTABLE PROVIDED THE NECESSARY DATA

ELEMENTS ARE PROVIDED.

1. A002

2. REQUEST FOR VARIANCE (RFV)

3. N/A

4. DI-SESS-80640

5. SECTION C

6. RDAR-EIS-PD

7. LT

8. N/A

9. SEE BLOCK 16

10. ASREQ

11. N/A

12. ASREQ

13. ASREQ

14. SEE BLOCK 16

15. TOTAL 0 / 2 / 0

16. REMARKS

DATA MUST BE IN GOVERNMENT COMPATIBLE SOFTWARE (e.g., MICROSOFT OFFICE OR PORTABLE DOCUMENT FORMAT (pdf)). *DISTRIBUTION STATEMENT WILL BE ASSIGNED

AND IMPLEMENTED BY THE DOD CONFIGURATION MANAGER. **SUBMIT ELECTRONICALLY TO

usarmy.pica.rdecom-ardec.mbx.ecp-document@mail.mil AND TO THE GOVERNMENT

CONTRACT SPECIALIST. ELECTRONIC FILES SHALL BE LESS THAN 7MB. THE PREFERRED

METHOD IS THE DD FORM 1692 WHICH IS LOCATED AT

http://www.dtic.mil/whs/directives/infomgt/forms/. CONTRACTOR FORMAT

ALTERNATIVE TO THE DD FORM IS ACCEPTABLE PROVIDED THE NECESSARY DATA

ELEMENTS ARE PROVIDED.

1. A003

2. NOTICE OF REVISION (NOR)

3. N/A

4. DI-SESS-80642

5. SECTION C

6. RDAR-EIS-PD

7. LT

8. N/A

9. SEE BLOCK 16

10. ASREQ

11. N/A

12. ASREQ

13. ASREQ

14. SEE BLOCK 16

15. TOTAL 0 / 2 / 0

16. REMARKS

DATA MUST BE IN GOVERNMENT COMPATIBLE SOFTWARE (e.g., MICROSOFT OFFICE OR PORTABLE DOCUMENT FORMAT (pdf)). *DISTRIBUTION STATEMENT WILL BE ASSIGNED

AND IMPLEMENTED BY THE DOD CONFIGURATION MANAGER. **SUBMIT ELECTRONICALLY TO

usarmy.pica.rdecom-ardec.mbx.ecp-document@mail.mil AND TO THE GOVERNMENT

CONTRACT SPECIALIST. ELECTRONIC FILES SHALL BE LESS THAN 7MB. THE PREFERRED

METHOD IS THE DD FORM 1692 WHICH IS LOCATED AT

http://www.dtic.mil/whs/directives/infomgt/forms/. CONTRACTOR FORMAT

ALTERNATIVE TO THE DD FORM IS ACCEPTABLE PROVIDED THE NECESSARY DATA

ELEMENTS ARE PROVIDED.

1. A004

2. TEST PROCEDURE-PHOSPHATE COATING

3. PRE-PRODUCTION PROCEDURE

4. DI-NDTI-80603

5. TT-C-490, TYPE 1, PARAS 3.2.1, 3.2.2

6. RDAR-MEE-W(R)

7. XX

8. A

9. N/A

10. ONE/R

11. N/A

12. 60DAC

13. N/A

14. THRU CONTRACTING OFFICER 0 / 1 / 0

15. TOTAL 0 / 1 / 0

16. REMARKS

SUBMIT ELECTRONICALLY TO THE GOVERNMENT CONTRACT SPECIALIST.

BLOCK 8 CONT. - PRIOR TO PRODUCTION, APPROVAL THRU THE CONTRACTING

OFFICER IS REQUIRED W/IN 90 DAYS AFTER CONTRACT AWARD. CONTRACTING

OFFICER WILL ROUTE INTERNALLY TO THE APPROVING OFFICE (FCDD-ACE-QP).

CONTRACTING OFFICER SHALL PROVIDE PROCEDURE AND TEST REVIEW

RESPONSE BACK TO CONTRACTOR. COATED PANELS PER PARA 3.2.2 SHALL INCLUDE

THREE WITH PHOSPHATE ONLY, THREE WITH PHOSPHATE AND PRIMER, AND THREE

WITH PHOSPHATE, PRIMER AND TOP COAT. THE PANELS SHALL BE MAILED TO THE

FOLLOWING ADDRESS:

Combat Capabilities Development Command Armaments Center Attn: FCDD-ACE-QP/Mark Godlewski 1 Rock Island Arsenal Bldg. 62 2nd Floor, NW Wing Rock Island, IL 61299-7300

A DD FORM 250 IS NOT REQUIRED FOR PHOSPHATE COATING PROCEDURE APPROVAL. CONTRACTOR FORMAT ACCEPTABLE.

1. A005

2. TEST/INSPECTION REPORT

3. FIRST ARTICLE TEST REPORT (FATR)CONTRACTOR FACILITY

4. DI-NDTI-80809

5. SECTION E

6. RDAR-EIQ-P

7. XX

8. A* 9.

10. ASREQ

11. N/A

12. ASREQ

13. ASREQ

14. THRU QAR 0 / 1 / 0 PCO 0 /1 / 0 RDAR-EIQ-P O / 1 / 0

15. TOTAL 0 / 3 / 0

16. REMARKS

REQUIRED BY THE AUTHORITY IN BOX 4, PARA 10.2 AND ITS SUBPARAGRAPHS.

CONTRACTOR FORMAT IS ACCEPTABLE.

BOX 5: CONTRACT REFERENCE. THE CONTRACTOR SHALL PROVIDE TO THE PROCURING

CONTRACTING OFFICER, QAR, AND RDAR-EIQ-P AT LEAST 15 CALENDAR DAYS ADVANCE

NOTICE (IN WRITING) OF THE SCHEDULED DATE, TIME AND LOCATION OF START OF

FAT, SO THAT THE GOVERNMENT MAY WITNESS THE TESTS. THE GOVERNMENT WILL

REVIEW THE FATR AND PROVIDE FEEDBACK TO THE CONTRACTOR WITHIN 30 DAYS OF

RECEIPT OF FATR.

BLOCK 13: SUBSEQUENT SUBMISSION ONLY IF INITIAL FAT FAILS.

BLOCK 16: FATR MAY BE SUBMITTED ELECTRONICALLY THROUGH THE QAR, CONTRACTING

OFFICER, AND QUALITY ASSURANCE. QUALITY ASSURANCE ELECTRONIC SUBMISSION:

USARMY.RIA.ARDEC.MBX.RDAR-QEP2@MAIL.MIL -----------------------------------------------------------------------------

DATE: 23 AUGUST 2019