SPI_-_AK11645899.pdf
PDF 149 KB Posted
- Attached to
- Wiring Harness, Branched Federal contract opportunity
- Solicitation number
- SPRDL119R0334
About this file
This document contains a request for information and special packaging instructions for a wiring harness. The Defense Logistics Agency Land and Maritime is seeking information from capable sources for the wiring harness, branched item, National Stock Number 2920-01-164-5899. Interested parties must provide company details including name, DUNS, CAGE code, point of contact, and small business designation. The special packaging instructions provide preservation, cleaning, packing, and marking requirements for shipping the wiring harness according to Military Standards.
Special Packaging Instructions added to FBO on 24 October 2019.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0334-0001.pdf | ||
| SPRDL119R0334.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12322516 (19207) WIRING HARNESS, BRAN 19207 AK11645899
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2920-01-164-5899 12/08/2010 B
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 36.9 1.418 25.8 X 25.0 X 3.8
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 41 1A 2 CAP: NAS OR EQUIVALENT.
13. CLEANING
MIL-STD-2073-1D 2B 2 CUSHIONING: A-A-59135, CLASS 1, GRADE A,
14. DRYING SIZE: 12 X 8 X 1/4.
MIL-STD-2073-1D
3C 1 CUSHIONING: A-A-59135, CLASS 1, GRADE A,
15. PACKING SIZE: 12 X 8 X 1/4.
a. LEVEL A
MIL-STD-2073-1D AND NOTE G 4 1 BAG: MIL-DTL-117, TYPE I, CLASS E, SIZE: 30 X 32.
b. LEVEL B
MIL-STD-2073-1D AND NOTE G 5 1 CONTAINER: ASTM-D5118, TYPE CF, CLASS WR,
16. MARKING STYLE FOL, VARIETY SW, GRADE W5c, MIL-STD-129 SIZE: 24-5/8 X 3-3/8 X 24-5/8.
17. NOTES / DRAWING
A. PLACE CAP ON CONNECTORS. IF PART IS RECIEVED WITH CAPS INSTALLED THEN THIS STEP MAY BE
ELIMINATED.
B. WRAP EACH CONNECTOR WITH CUSHIONING AND SECURE WITH TAPE.
C. WRAP TERMINALS WITH CUSHIONING AND SECURE WITH TAPE.
D. COIL PART TO 24-1/2 X 24-1/2 X 3-1/4 AND SECURE WITH TAPE.
E. CLOSE BAG BY HEAT SEALING.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B2.
G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-
STD-147 MAY BE USED FOR GUIDANCE.
H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-
1D AND THE APPLICABLE CONTAINER SPECIFICATION.
File details come from the government source that posted it. Updated .