Special_Packaging_Instructions_-_AK15628935.pdf

1. PART OR DRAWING NO./CAGE/NOMENCLATURE

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

7. QUP

2. CAGE

5. DATE

10. UNIT PACK CU8. ICQ 9. UNIT PACK WT.

3. SPI NO.

6. REVISION

11. UNIT PACK SIZE

12. MILITARY PRESERVATION

13. CLEANING

14. DRYING

15. PACKING

a. LEVEL A

b. LEVEL B

16. MARKING

17. NOTES/DRAWING

MIL-STD-2073-1D, METHOD 20

MIL-STD-2073-1D

MIL-STD-2073-1D

MIL-STD-2073-1D AND NOTE G

NOT APPLICABLE

MIL-STD-129

18. 19. 20.

STEPS REQD DESCRIPTION

6041986 (34623) KNUCKLE ASSEMBLY, GEARED HUB 19207 AK15628935

2-11-09

1 EA. NONE 116.0 3.828 21.0 X 18.0 X 17.5

1-B PRESERVATIVE: MIL-PRF-16173, GR. 4.

2-C 1 CLOSURE: NAS834.

3-D 1 WRAP: MIL-PRF-121, TYPE II, SIZE: 36 X 40.

4-E 10 BLOCKING: ASTM-D 6199, GROUP II, WOOD.

5-F 1 CONTAINER: ASTM-D 6880, CL. 2, STYLE 4,

SIZE: 18 X 15 X 13.

A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1D.

B. APPLY PRESERVATIVE TO ALL BARE UNPAINTED METALLIC SURFACES.

C. SEAL PORT USING CAP OR PLUG OF THE APPROPRIATE SIZE.

D. SECURE WRAP USING TAPE.

E. FOR FABRICATION AND PLACEMENT SEE ILLUSTRATIONS ON SHEETS 2 AND 3.

F. CONTAINER MODIFIED USING ONE-INCH NOMINAL LUMBER.

G. UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

SR

2530-01-562-8935

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

6041986 (34623) KNUCKLE ASSEMBLY, GEARED HUB 19207 AK15628935

2-11-09

NOTES:

1. ALL DIMENSIONS ARE IN INCHES.

2. FABRICATE BLOCKING “A”, TWO REQUIRED, SIZE: 18 X 4 X 1-1/2. SECURE BLOCKING THROUGH BLOCKING “A” INTO CONTAINER BASE USING NAILS, ASTM-F 1667, NUMBER 8. LOCATE BLOCKING AS

ILLUSTRATED BELOW.

3. FABRICATE BLOCKING “B”, TWO REQUIRED, SIZE: 7 X 4 X 1-1/2. SECURE BLOCKING THROUGH BLOCKING “B” INTO CONTAINER BASE USING NAILS, ASTM-F 1667, NUMBER 8. LOCATE BLOCKING AS

ILLUSTRATED BELOW.

4. FABRICATE BLOCKING “C’, TWO REQUIRED, SIZE: 15 X 2 NOM. X 4 NOM. SECURE BLOCKING THROUGH CONTAINER LID INTO BLOCKING “C’ USING AILS, ASTM-F 1667, NUMBER 12. LOCATE BLOCKING AS

ILLUSTRATED ON SHEET 3.

5. FABRICATE BLOCKING “D”, FOUR REQUIRED, SIZE: 6-5/16 X 2 NOM. X 4 NOM. SECURE BLOCKING THROUGH BLOCKING “C” INTO BLOCKING “D” USING NAILS, ASTM-F 1667, NUMBER 12. LOCATE

BLOCKING AS ILLUSTRATED ON SHEET 3.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

6041986 (34623)_ KNUCKLE ASSEMBLY, GEARED HUB 19207 AK15628935

2-11-09

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT