SPI_AK06787076.pdf
PDF 509 KB Posted
- Attached to
- CYLINDER ASSEMBLY Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0307
About this file
This document contains a special packaging instruction and related federal contract opportunity solicitation. The special packaging instruction provides detailed requirements for packaging Cylinder Assembly part number 19207, national stock number 3040-00-678-7076, including preservation, cleaning, packing, marking, and container construction. The related federal contract opportunity is solicitation number SPRDL1-19-R-0307 for 143 each of the same Cylinder Assembly, set aside for small businesses. Offerors must respond by the due date in September 2019 as specified in the solicitation to obtain drawings. The Defense Logistics Agency Land and Maritime is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-19-R-0307_0001.pdf | ||
| SPRDL119R0307.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188 -BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
8743887 (19207)* CYLINDER ASSEMBLY 19207 AK06787076
4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION
3040-00-678-7076 09-21-2001 E
7. QUP 8. ICQ 9. UNIT PACK WT.(LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE 214.7 6.429 46.6 X 14.9 X 16.0
18.
STEPS
19.
REQD
20.
DESCRIPTION
12. MILITARY PRESERVATION 1-C PRESERVATIVE: MIL-PRF-21260, GR 10
MIL-STD-2073-1D, METHOD 20 & NOTE A 2-D CAPS/PLUGS: SEE NOTE
13. CLEANING 3-E PRESERVATIVE: MIL-PRF-16173, GR 2
MIL-STD-2073-1D & NOTE B 4-F 2 WRAP: MIL-B-121, TY II, CL 2, GR A, SIZE: 14 X 10
14. DRYING 5-G BLOCKING/BRACING: SEE NOTE
MIL-STD-2073-1D & NOTE B 6-H BARRIER: MIL-B-121, TY II, CL 2, GR A
15. PACKING 7-J 1 CONTAINER: PPP-B-621, CL 2, ST 2,
a. LEVEL A SIZE: 43-5/8 X 13-3/8 X 11
MIL-STD-2073-1D & NOTE J
b. LEVEL B
NOT APPLICABLE
16. MARKING
MIL-STD-129 AND NOTE K
17. NOTES/DRAWINGS
A. THE UNIT PACK SHALL PROVIDE PHYSICAL AND MECHANICAL PROTECTION WITH A PRESERVATIVE COATING.
B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.
C. CYLINDER SHIPPED FILLED WITH OIL, MIL-PRF-21260 GRADE 10, IN ACCORDANCE WITH THE ITEM DRAWING.
D. SEAL ALL OPENINGS TO THE INTERIOR OF THE CYLINDER WITH CAPS/PLUGS OF THE APPROPRIATE SIZE IN
ACCORDANCE WITH THE ITEM DRAWING.
E. APPLY PRESERVATIVE TO ALL BARE METAL SURFACES IN ACCORDANCE WITH THE ITEM DRAWING.
F. APPLY ONE (1) PIECE AROUND EACH PRESERVED END AND SECURE WITH ASTM D 5486, TY IV TAPE.
G. SEE PAGES 2 AND 3.
H. APPLY BARRIER MATERIAL BETWEEN ALL SECTIONS OF THE CYLINDER THAT COME IN DIRECT CONTACT
WITH THE INTERIOR OF THE CONTAINER AND/OR BLOCKING/BRACING.
J. THE UNIT CONTAINER IS THE SHIPPING CONTAINER. THE CONTAINER IS CONSTRUCTED OF ALL 1-INCH THICK NOMINAL LUMBER. SIZE AND APPLICATION OF SKIDS ARE IN ACCORDANCE WITH PPP-B-621.
K. IN ADDITION TO MIL-STD-129 MARKING, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM 1/2 INCH HIGH BLOCK LETTERS “REUSABLE CONTAINER AND CUSHIONING, DO NOT DESTROY”.
* THIS PACKAGING INSTRUCTION ALSO APPLIES TO P/N E2040 (43491).
DD Form 2169, SEP 96 Previous editions are obsolete. Page 1 of 3 Pages
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
OMB No. 0704-0188 -BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
8743887 (19207) CYLINDER ASSEMBLY 19207 AK06787076
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-00-678-7076 09-21-2001 E
17. NOTES/DRAWINGS CONTINUED
DD Form 2169C, SEP 96 Previous editions are obsolute Page 2 of 3 Pages
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
OMB No. 0704-0188 -BM
Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
8743887 (19207) CYLINDER ASSEMBLY 19207 AK06787076
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
3040-00-678-7076 09-21-2001 E
17. NOTES/DRAWINGS CONTINUED
DD Form 2169C, SEP 96 Previous editions are obsolute Page 3 of 3 Pages
File details come from the government source that posted it. Updated .