SPI.pdf
PDF 144 KB Posted
- Attached to
- VALVE, LINEAR, DIRECT Federal contract opportunity
- Solicitation number
- SPRDL119R0291
About this file
This document contains a special packaging instruction and related federal contract opportunity notice. The special packaging instruction provides detailed requirements for packaging and preserving Valve, Linear, Direct part number 12321779 for shipment and storage. Key details include wrapping the part in polyethylene, using adhesive-laminated pads and containers conforming to military and commercial standards to package individually and in exterior packs. The related federal contract opportunity is a solicitation seeking fixed-price offers for 41 each of Valve, Linear, Direct part 12321779. The solicitation number is SPRDL119R0291 and will be issued by Defense Logistics Agency Land and Maritime on July 9, 2019, with bids due by August 13, 2019. The requirement is set aside for total women-owned small businesses. A reverse auction may be used to determine pricing.
Special Packaging Instructions
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0291-0007.pdf | ||
| SPRDL119R0291-0006.pdf | ||
| SPRDL119R0291-0005.pdf | ||
| SPRDL119R0291-0004.pdf | ||
| SPRDL119R0291-0003.pdf | ||
| SPRDL119R0291-0002.pdf | ||
| SPRDL119R0291-0001.pdf | ||
| SPRDL119R0291.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12321779 (19207) VALVE, LINEAR, DIRECT 19207 AK12003109
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4810-01-200-3109 11-21-2006 D
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 19.7 0.416 12.9 X 9.6 X 5.8
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 42 1C 1 WRAP: A-A-3174, POLYETHYLENE,
13. CLEANING THICKNESS 4 MIL, SIZE: 21 X 15.
MIL-STD-2073-1D 2D 1 PAD: ASTM-D4727, TYPE CF, CLASS D,
14. DRYING VARIETY DW, GRADE 350, SIZE: SEE PAGE 2.
MIL-STD-2073-1D 3B 2 PAD: ASTM-D4727, TYPE CF, CLASS D,
VARIETY DW, GRADE 350, SIZE: SEE NOTE B.
15. PACKING 4D 1 CONTAINER: ASTM-D5118, TYPE CF, CLASS D,
a. LEVEL A STYLE RSC, VARIETY SW, GRADE 275, MIL-STD-2073-1D AND NOTE G SIZE: 12 X 8-3/4 X 4.
b. LEVEL B 5E 1 BAG: MIL-DTL-117, TYPE I, CLASS E, SIZE: 15 X 24.
MIL-STD-2073-1D AND NOTE G 6F 1 CONTAINER: ASTM-D5118, TYPE CF, CLASS WR,
16. MARKING STYLE RSC, VARIETY SW, GRADE W5c, MIL-STD-129 SIZE: 12-1/2 X 9-1/4 X 5.
17. NOTES / DRAWING
A. CIRCLED NUMBERS ON ACCOMPANYING PAGE REFERENCE STEPS.
B. LAMINATE USING A GOOD GRADE OF COMMERCIAL ADHESIVE WITH ALTERNATING FLUTE DIRECTIONS
TO DIMENSIONS 8-1/2 X 2-3/4 X 2.
C. WRAP PART WITH WRAP AND SECURE WITH TAPE.
D. POSITION PADS FROM STEPS 2D AND 3B AROUND PREPARED PART AS SHOWN ON PAGE 2 AND PLACE
INTO CONTAINER. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
E. CLOSE BAG BY HEAT SEALING.
F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.
MIL-HDBK-774 MAY BE USED FOR GUIDANCE.
H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12321779 (19207) VALVE, LINEAR, DIRECT 19207 AK12003109
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4810-01-200-3109 11-21-2006 D
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
2D
A
A SECTION
A-A
10-7/8
11-7/8
7-1/2 8-1/2
1/4 1-1/4
LAMINATE TO REQUIRED THICKNESS WHILE ALTERNATING FLUTE DIRECTION
P/N: 12321779
2D
3B
(2 PLACES)
File details come from the government source that posted it. Updated .