SPI_AK15925927.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

BH

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

51882-004 (0EJ14) WINCH, DRUM, POWER 19207 AK15925927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-592-5927 3/9/2012

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 2142.0 46.456 54.3 X 38.3 X 38.6

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-C A/R PRESERVATIVE: MIL-PRF-21260, GR 30

MIL-STD-2073-1D & NOTE B 2-D A/R PRESERVATIVE: MIL-PRF-10924

14. DRYING 3-E A/R PRESERVATIVE: MIL-PRF-16173, GR 1

MIL-STD-2073-1D & NOTE B 4-F A/R CAPS/PLUGS: NAS 847

15. PACKING

5-G A/R PRESERVATIVE: MIL-PRF-16173, GR 4

6-H 1 BARRIER: MIL-PRF-121, TY II, SIZE: 36 X 48

a. LEVEL A 7-I 2 BLOCKING/BRACING: ASTM-D6199

MIL-STD-2073-1D & NOTE K 8-J 1 CONTAINER: ASTM-D7478, TY II, CL 2, ST A,

b. LEVEL B SIZE: 52 X 36 X 28

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE L

17. NOTES/DRAWING

A. INSPECT, PRESERVATION, UNIT PACK, AND PACKING IN ACCORDANCE WITH MIL-STD-2073-1D AND THE

APPLICABLE CONTAINER SPECIFICATION.

B. CLEAN AND DRY ITEMS BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.

C. FLUSH OR SLUSH INTERNALLY WITH PRESERVATIVE. DRAIN EXCESS.

D. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.

E. COAT WINCH CABLE WITH PRESERVATIVE; MANUFACTURERS PRESERVATIVE IS ACCEPTABLE.

F. SEAL ALL GREASE (ZERK) FITTINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.

G. APPLE PRESERVATIVE TO EXTERIOR BARE FERROUS SURFACES.

H. PLACE BARRIER MATERIAL ATOP CONTAINER BASE BEFORE MOUNTING WINCH.

I. ALL LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED. SECURE BLOCKING TO CONTAINER

USING NAILS/STAPLES CONFORMING TO ASTM-F1667.

J. CLOSE CONTAINER ACCORDING TO ASTM-D7478.

K. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

L. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE SIDE WITH MINIMUM ½ INCH HIGH BLACK LETTERS “REUSABLE CONTAINER, DO NOT DESTROY”. IN ADDITION THE TOP SHALL BE MARKED “REMOVE (LAG BOLTS OR SCREWS) TO OPEN CONTAINER”, USING

MINIMUM ½ INCH HIGH BLACK LETTERS

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 BH

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

51882-004 (0EJ14) WINCH, DRUM, POWER 19207 AK15925927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-592-5927 3/9/2012

ITEM SIZE QTY DESCRIPTION

A 2 X 6 X 54-1/4 2 ASTM-D6199

B ¾ X 5” HARDWARE SET 4 HARDWARE SET CONSISTS OF: 1PC ¾ X 5” CARRIAGE

BOLT, 1PC ¾ LOCK WASHER, 1PC ¾ FLAT WASHER &

1PC ¾ NUT

C ½ X 6” HARDWARE SET 4 HARDWARE SET CONSISTS OF: 1PC ½ X 6” CARRIAGE

BOLT, 1PC ½ LOCK WASHER, 1PC ½ FLAT WASHER &

1PC ½ NUT

D ½ X 8” HARDWARE SET 6 HARDWARE SET CONSISTS OF: 1PC ½ X 8” CARRIAGE

BOLT, 1PC ½ LOCK WASHER, 1PC ½ FLAT WASHER &

1PC ½ NUT

36 X 48 1 MIL-PRF-121, TY II

ITEM A

ITEM B

SLEEPER BOARDS (ITEM A) ARE LOCATED BENEATH BASE AND

RUN ALONG THE INSIDE EDGE OF THE TWO OUTER SKIDS AS

PICTURED

ITEM D

ITEM C

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 BH

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

51882-004 (0EJ14) WINCH, DRUM, POWER 19207 AK15925927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-592-5927 3/9/2012

FOR CLARITY WINCH IS

SHOWN WITHOUT BARRIER