SPI_459.pdf
PDF 116 KB Posted
- Attached to
- Voltage Regulator Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0258
About this file
Special Packaging Instructions (SPI)
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0258-0002.pdf | ||
| SPRDL119R0258-0001.pdf | ||
| SPRDL1-19-R-0258_FBO_Solicitation.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12489528 (19207) REGULATOR, VOLTAGE 19207 AK15407819
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
6110-01-540-7819 10-31-2006 -
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 7.4 0.486 14.0 X 12.0 X 5.0
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 31 1A 1 WRAP: A-A-3174, POLYETHYLENE,
13. CLEANING THICKNESS 4 MIL, SIZE: 23 X 14.
MIL-STD-2073-1D
14. DRYING 2B 1 CUSHIONING: A-A-59135, CLASS 1, GRADE A,
MIL-STD-2073-1D SIZE: 12 X 10 X 1/8.
15. PACKING 3C 1 BAG: MIL-DTL-117, TYPE II, CLASS C, SIZE: 12 X 15.
a. LEVEL A
MIL-STD-2073-1D AND NOTE E 4D 1 CONTAINER: MOLDED REUSABLE CONTAINER
b. LEVEL B ASSY, TYPE VI, SIZE: 13-1/4 X 10-3/4 X 4-1/2, MIL-STD-2073-1D AND NOTE E NSN: 8145-00-260-9562.
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. SECURE WITH TAPE.
B. WRAP CUSHIONING AROUND BOTTOM PLATE OF REGULATOR AND SECURE WITH TAPE.
C. CLOSE BAG BY HEAT SEALING.
D. CENTER PART BETWEEN THE BOTTOM AND TOP HALVES OF CONTAINER. COMPRESS FOR A SNUG FIT, AND SECURE BY ENCOMPASSING WITH TAPE, ASTM-D5330, TYPE IV, SIZE: 1/2 X A/R, INTO PREMOLDED
GROOVES, 4 PLACES.
E. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-
HDBK-774 MAY BE USED FOR GUIDANCE.
F. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-
1D AND THE APPLICABLE CONTAINER SPECIFICATION.
File details come from the government source that posted it.