SPI_AK12013674_C.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

XDW

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

001 N/A 2715.0 106.0 98.0 X 48.0 X 39.0

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 20

13. CLEANING 1-B PRESERVATIVE: MIL-DTL-32119

MIL-STD-2073-1

14. DRYING 2-C PRESERVATIVE: MIL-L-2105

MIL-STD-2073-1

15. PACKING

3-D PRESERVATIVE: MIL-PRF-10924

a. LEVEL A

4-E PRESERVATIVE: MIL-PRF-16173, GR 4

MIL-STD-2073-1 & NOTE G

b. LEVEL B

5-F CAP/PLUG: NAS847, SEE PAGE 5

N/A

16. MARKING 6-G CONTAINER: ASTM-D7478, ST A, TY II, CL 2

MIL-STD-129 SIZE: 89 X 44 X 28

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE

PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PRIMER APPLICATION ON NONMETALLIC SURFACES SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1.

C. FILL INTERIOR OF AXLE ASSEMBLY TO OPERATING LEVEL WITH LUBRICANT.

D. LUBRICATE BEARINGS, FITTINGS, CONNECTIONS, AND JOINTS WITH GREASE.

E. APPLY PRESERVATIVE TO UNPAINTED, UNPLATED, EXTERIOR METALLIC SURFACES.

F. SEAL ALL OPENINGS WITH CAPS/PLUGS, SEE PAGE 5.

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 6 Pages

Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

17. NOTES/DRAWINGS CONTINUED

17.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 6 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

18.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 6 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

19.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 6 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

20.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 5 of 6 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite

1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

3281962 (75Q65) AXLE ASSEMBLY 75Q65 AK12013674

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-201-3674 04/11/2017 C

17. NOTES/DRAWINGS CONTINUED

21.

ALL BLOCKING AND BRACING MEMBERS SHALL COMFORM TO ASTM-D6199.

ALL DIMENSIONS ARE IN INCHES.

ALL SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED.

BILL OF MATERIALS

ITEM NUMBER DESCRIPTION SIZE

1 SKID 4 X 4 X 96-3/4

2 HEADER 4 X 4 X 37

3 FLOORBOARDS 2 X 6 X 37

4 END THRUST STABILIZER BLOCK 4 X 4 X 25

5 LOADBEARING FLOORBOARD 2 X 10 X 37

6 BOLT, CARRIAGE, WITH NUT, FLAT 1/2 X 6

7 THREADED ROD WITH NUT, FLAT, AND

LOCKWASHER

1/2 X 22

8 STABILIZER BLOCK 2 X 6 X 5-3/4

9 STABILIZER BLOCK 2 X 4 X 37

10 SUPPORT BLOCK 4 X 4 X 12-3/4

11 STABILIZER BLOCK 2 X 6 X 11

12 SAME AS ITEM 4 4 X 4 X 25

13 BOLT, CARRIAGE, WITH NUT, FLAT

AND LOCKWASHER

1/2 X 8

14 BOLT, CARRIAGE, WITH NUT, FLAT

AND LOCKWASHER

1/2 X 4-1/2

15 RUBBING STRIP 3 X 4 X 22-3/8 (FULL 3”)

16 RUBBING STRIP 3 X 4 X 16 (FULL 3 “)

17 SUPPORT CRADLE “A” SEE PAGE 4

18 SUPPORT CRADLE “B” SEE PAGE 4

19 SUPPORT CRADLE BUILDUP 2 X 6 X 19-1/4

20 SUPPORT CRADLE BUILDUP 2 X 6 X 10

21 SUPPORT CRADLE BUILDUP 2 X 6 X 18-3/4

22 SUPPORT CRADLE BUILDUP 2 X 6 X 35-1/2

23 SUPPORT CRADLE BUILDUP 1 X 6 X 35-1/2

24 PILOT HOLE 1/2 DIAMETER

25 LAG SCRWE WITH FLAT WASHER 3/8 X 3-1/2

26 AXLE HOLD-DOWN 3 X 4 X 8-1/2

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 6 of 6 Pages