SPI_014355175.pdf
PDF 103 KB Posted
- Attached to
- Track Shoe Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-19-R-0226
About this file
This document provides special packaging instructions for a track shoe assembly. It specifies that 120,152 units plus a 100% option quantity must be packaged according to Military Standard 2073-1D, Level A or B. Packaging must include protective preservative, blocking, and strapping arranged as illustrated. The solicitation for this item is number SPRDL1-19-R-0226 and will be issued on or around October 7, 2019 via FedBizOpps. Bids are due by the closing date specified in the solicitation. The track shoe assembly has National Stock Number 2530-01-435-5175 and is procured by the Department of the Army Materiel Command TACOM Life Cycle Management Command.
Special Packaging Instructions
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119R0226.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12387880-1 (19207) TRACK SHOE ASSEMBLY 19207 AK14355175
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2530-01-435-5175 12-22-2003 A
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
16 EA NONE 1129.6 13.533 64.0 X 25.2 X 14.5
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 20 1C A/R PRESERVATIVE: MIL-PRF-16173, GRADE 1.
13. CLEANING 2D 2 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III,
MIL-STD-2073-1D SIZE: 2 X 6 (NOM) X 64.
14. DRYING 3D 12 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III,
MIL-STD-2073-1D SIZE: 2 X 6 (NOM) X 8.
4E 4 STRAPPING: ASTM-D3953, TYPE I,
15. PACKING SIZE: 1-1/4 OR 3/4 X 0.035 X A/R.
a. LEVEL A 5G 3 STRAPPING: ASTM-D3953, TYPE I, MIL-STD-2073-1D AND NOTE H SIZE: 1-1/4 X 0.035 X A/R.
b. LEVEL B 6G 4 BLOCKING: ASTM-D6199, CLASS 2, GROUP II OR III, MIL-STD-2073-1D AND NOTE H SIZE: 1 X 2 (NOM) X 22.
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. CIRCLED NUMBERS ON PAGE 2, REFERENCE STEPS.
B. USE THE 16 SHOE ASSEMBLIES TO MAKE TWO 8-SHOE STRIP SECTIONS.
C. APPLY PRESERVATIVE TO BARE FERROUS SURFACES.
D. NAIL BLOCKING FROM STEP 3, ONTO BLOCKING FROM STEP 2, THREE PIECES EACH END AS ILLUSTRATED ON PAGE 2. BLOCKING IS TO BE FLUSH AT ENDS. TWO OF THESE ASSEMBLIES ARE
REQUIRED.
E. LAY ONE 8-SHOE STRIP SECTION ON FLOOR WITH CENTER GUIDES UP. PLACE ASSEMBLED BLOCKING FROM NOTE D, ON EACH SIDE OF CENTER GUIDES. SECURE BLOCKING TOGETHER WITH TWO PIECES
OF STRAPPING, STEP 4, AND NAILS, AS SHOWN ON PAGE 2.
F. PLACE SECOND 8-SHOE STRIP SECTION ON TOP OF BLOCKING, AND 8-SHOE STRIP SECTION FROM
NOTE E, WITH CENTER GUIDES POINTING DOWN. MAKE SURE THAT THE END CONNECTORS AND
CENTER GUIDES ON ENDS OF TRACK ARE AT OPPOSITE ENDS. SEE PAGE 2.
G. POSITION BLOCKING FROM STEP 6 AS ILLUSTRATED ON PAGE 2. TIGHTLY SECURE WITH STRAPPING FROM STEP 4 THRU BOTH SECTIONS OF TRACK AND AROUND BLOCKING. PLACE ANOTHER SECTION OF STRAPPING, FROM STEP 5, COMPLETELY AROUND BOTH TRACK ASSEMBLIES AND BLOCKING. SEE
PAGE 2.
H. THE UNITIZED LOAD IS ACCEPTABLE FOR LEVEL A AND LEVEL B PACKING.
I. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12387880-1 (19207) TRACK SHOE ASSEMBLY 19207 AK14355175
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
2530-01-435-5175 12-22-2003 A
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
(12 PLACES)
(2 PLACES)
(4 PLACES)
CENTER GUIDES
END CONNECTORS
END CONNECTOR
CENTER GUIDE
END CONNECTOR
CENTER GUIDE
5(2 PLACES)
(2 PLACES)
File details come from the government source that posted it. Updated .