Attachment_0001_-_Special_Packaging_Instructions.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12304580 (19207) SHIPPING AND STORAG 19207 AK11126582

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

8145-01-112-6582 9-11-2006 C

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 1595.1 158.658 75.4 X 60.3 X 60.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 55

13. CLEANING

MIL-STD-2073-1D 1C DESICCANT: MIL-D-3464, TYPE II,

14. DRYING QTY: 32 UNITS

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE E

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE D

17. NOTES / DRAWING

A. ALL OF THE DIMENSIONS ARE IN INCHES UNLESS THEY ARE SPECIFIED OTHERWISE.

B. QUALITY CONFORMANCE FOR THE CONTAINER SHALL BE IN ACCORDANCE WITH A-A-52462. THE GOVERNMENT SHALL FURNISH A TRANSMISSION FOR THE CONTAINER’S FIRST ARTICLE INSPECTION

TEST.

C. PLACE TWO (2) X SIXTEEN (16) UNITS OF DESICCANT INTO THE CONTAINER’S DESICCANT BASKET.

D. MARKING:

1. THE FOLLOWING INFORMATION SHALL BE MARKED ON THE CONTAINER DATA PLATE FOR ALL

CONTAINERS GOING INTO U.S. ARMY DEPOT STOCK:

a.) CONTAINER SPECIFICATION.

b.) CONTAINER CONTRACT NUMBER.

c.) CONTAINER NATIONAL STOCK NUMBER.

2. ALL DATA PLATE INFORMATION WILL BE MARKED ON THE CONTAINER DATA PLATE FOR THOSE CONTAINERS GOING TO A TRANSMISSION CONTRACTOR TO CONTAINERIZE TRANSMISSION UNITS.

THE CONTRACTING OFFICER WILL PROVIDE THE CONTAINER CONTRACTOR WITH THE FOLLOWING

INFORMATION FOR THE DATA PLATE:

a.) TRANSMISSION MODEL NUMBER.

b.) TRANSMISSION NATIONAL STOCK NUMBER.

c.) TRANSMISSION WITH CONTAINER NATIONAL STOCK NUMBER.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12304580 (19207) SHIPPING AND STORAG 19207 AK11126582

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

8145-01-112-6582 9-11-2006 C

3. a.) “CARC” SHALL BE MARKED WITH PAINT CONFORMING TO MIL-DTL-53039 OR MIL-DTL-64159, COLOR BLACK, IN 1 INCH LETTERS IN AN AREA AS NEAR AS PRACTICAL TO THE NAMEPLATE.

b.) “REUSABLE CONTAINER: DO NOT DESTROY” SHALL BE MARKED WITH PAINT CONFORMING TO MIL-DTL-53039 OR MIL-DTL-64159. COLOR BLACK IN 1/2” HIGH LETTERS IN AN AREA OF THE

LOWER CONTAINER SECTION ON THE SAME END AS THE NAME PLATE.

E. THE ITEM IS A LEVEL A SHIPPING CONTAINER.

F. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.