SPI_-_AK10690483.pdf

PDF 140 KB Posted Apr 15, 2019

Attached to: Drive Unit, Angle Federal contract opportunity
Solicitation number: SPRDL1-19-R-0171
Issued by: Department of the Army Materiel Command TACOM Life Cycle Management Command

About this file

From the source

SPI AK10690483

View the file

Other files for this federal contract opportunity

Other files attached to Drive Unit, Angle, newest first.
File	Type	Posted
SPRDL119R0171.pdf	PDF	Apr 15, 2019
Synopsis_-_8E1872_-_SPRDL1-19-R-0171.pdf	PDF	Mar 26, 2019

On GovTribe

Work with this file on GovTribe

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 5 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC/CT

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273796-1 (19207) DRIVE UNIT, ANGLE 19207 AK10690483

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

3010-01-069-0483 11-30-2001 B

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 82.0 4.755 21.5 X 21.0 X 18.2

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 43 SEE NOTES.

13. CLEANING

MIL-STD-2073-1D, CODE 1

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE F

b. LEVEL B

MIL-STD-2073-1D AND NOTE F

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE

ACCOMPANYING PAGES.

B. PLUG THE TWO PORTS OF THE HOUSING ASSEMBLY WITH PLUGS, ITEMS 1 AND 2.

C. APPLY PRESERVATIVE, ITEM 3, TO UNPAINTED METALLIC SURFACES.

D. WRAP PART WITH ITEM 4 AND SECURE WITH TAPE.

E. PREPARE CONTAINER, ITEM 12, AS SHOWN ON PAGE 3. BARRIER FABRICATION SHALL BE COMPLETED BY HEAT SEALING TOGETHER TOP AND BOTTOM PIECES OF BARRIER MATERIAL, AFTER PLACEMENT OF WRAPPED ITEM ON BOTTOM HALF OF BARRIER MATERIAL. GASKETS, ITEM 11, SHALL BE CEMENTED TO BOTH SIDES OF BARRIER, ITEM 5, AT THE MOUNTING LOCATIONS USING ADHESIVE, ITEM 13. AFTER POSITIONING BARRIER, ITEM 5, OVER BOLTS, ITEM 7, A SUFFICIENT QUANTITY OF ADHESIVE SHALL BE APPLIED AROUND THE BOLTS, ITEM 7, AND GASKETS, ITEM 11, TO PROVIDE AN AIRTIGHT SEAL.

F. THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL A AND LEVEL B SHIPPING CONTAINER.

G. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH

MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 5 Pages

2-1/2

1 NOM

3-3/4

6 NOM

25-7/16

10-1/2

12-1/4

23-3/4

1/2 DIAMETER, 4 PLACES

1/2 DIAMETER, 2 PLACES

15-1/4

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273796-1 (19207) DRIVE UNIT, ANGLE 19207 AK10690483

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

3010-01-069-0483 11-30-2001 B

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 5 Pages

1/2 DIA.

(4 PLACES)

SKIDS

17-7/16

18-1/8

18-3/4

15-1/4

3-3/4

7/8

1-1/4

2-1/2

CONTAINER BASE WITH PAD

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273796-1 (19207) DRIVE UNIT, ANGLE 19207 AK10690483

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 5 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273796-1 (19207) DRIVE UNIT, ANGLE 19207 AK10690483

P/N: 12273798-1

ASSEMBLY VIEW

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 5 Pages

OMB No. 0704-0188

-CC

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12273796-1 (19207) DRIVE UNIT, ANGLE 19207 AK10690483

BILL OF MATERIALS

DESCRIPTION

SIZE

SPECIFICATION DATA

QTY.

1 PLUGS NAS834. 1

2 PLUGS NAS841. 1

3 PRESERVATIVE MIL-PRF-32033. A/R

4 WRAP 36 X 57 MIL-PRF-121, TYPE II. 1

5 BARRIER SEE PAGE 2 MIL-E-6060. 2

6 BLOCKING SEE PAGE 2 ASTM-D6199, CLASS 2,

GROUP II OR III.

7* BOLT, CARRIAGE 7/16 X 4-1/2 COMMERCIAL GRADE. 4

8* WASHER, FLAT 7/16 COMMERCIAL GRADE. 4

9* WASHER, LOCK 7/16 COMMERCIAL GRADE. 4

10* NUT, HEX 7/16 COMMERCIAL GRADE. 4

11 GASKET 2 X 2 ASTM-F104, NO. P2255-A. 8

12 CONTAINER 20 X 19 X 13 ASTM-D6251, TYPE III, CLASS 2, STYLE

I, 1/2 INCH (NOM) BASE.

13 ADHESIVE MMM-A-260. A/R

14 PAD 17-1/2 X 17-1/4 ASTM-D4727, TYPE CF, CLASS D,

VARIETY SW, GRADE 200.

15 PAD 17-1/2 X 17-1/4 ASTM-D4727, TYPE CF, CLASS WR,

VARIETY SW, GRADE W5c.

*NOTE: COMMERCIAL QUALITY STEEL IS ACCEPTABLE WITH ZINC PLATING OR PRESERVATIVE COATING

CONFORMING TO MIL-PRF-1673, GRADE 4.

File details come from the government source that posted it.