SPI_AK015744828.pdf

1. PART OR DRAWING NO./CAGE/NOMENCLATURE

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

7. QUP

2. CAGE

5. DATE

10. UNIT PACK CU8. ICQ 9. UNIT PACK WT.

3. SPI NO.

6. REVISION

11. UNIT PACK SIZE

12. MILITARY PRESERVATION

13. CLEANING

14. DRYING

15. PACKING

a. LEVEL A

b. LEVEL B

16. MARKING

17. NOTES/DRAWING

MIL-STD-2073-1E, METHOD 20

MIL-STD-2073-1E

MIL-STD-2073-1E

MIL-STD-2073-1E AND NOTE H

NOT APPLICABLE

MIL-STD-129

18. 19. 20.

STEPS REQD DESCRIPTION

12529095 19207 AXLE, REAR 19207 AK15744828

MARCH 9, 2016

1 EA. NONE 119.0 4.364 24.8 X 18.1 X 16.8

1-B INTERIOR PRESERVATION: OPERATIONAL FLUID.

2-C EXTERIOR PRESERVATION: MIL-PRF-16173, GRADE 4

3-D 4 CLOSURE: NAS834.

4-E 3 WRAP: MIL-PRF-121, TYPE II, SIZE: 10 X 10.

5-F 4 BLOCKING: ASTM-D 6199, GROUP II, WOOD.

6-G 1 CONTAINER: ASTM-D 6880, CL. 2, STYLE 4, MOD.,

SIZE: 21-3/4 X 15-1/16 X 12-1/4.

A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1E.

B. INTERIOR PRESERVATION: REMOVE PLUG AND FILL AXLE ASSEMBLY TO OPERATING LEVEL WITH PRESERVATIVE.

ROTATE INTERNAL MECHANISM SUFFICIENTLY TO ENSURE COMPLETE COVERAGE OF ALL INTERNAL SURFACES.

DRAIN ASSEMBLY AND REPLACE PLUG.

C. EXTERIOR PRESERVATION: APPLY PRESERVATIVE TO ALL BARE METALLIC SURFACES OF AXLE ASSEMBLY.

D. SEAL ALL PORTS WITH CAPS OR PLUGS OF THE APPROPRIATE SIZE.

E. WRAP PRESERVED SURFACES AND SECURE WRAPS USING TAPE.

F. FOR FABRICATION AND PLACEMENT, SEE ILLUSTRATIONS ON SHEETS 2 THROUGH 4.

G. CONTAINER MODIFIED USING ONE-INCH NOMINAL LUMBER, EXCEPT FOR SKIDS.

H. UNIT CONTAINER IS THE SHIPPING CONTAINER.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 4 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

SR

2520-01-574-4828 A

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

12529095 19207 AXLE, REAR 19207 AK15744828

MARCH 9, 2016

NOTES:

1. ALL DIMENSIONS ARE IN INCHES.

2. FABRICATE BLOCKING “A”, TWO REQUIRED, SIZE: 18-3/4 X 5-1/2 X 1 NOM. FOR FABRICATION, SEE

ILLUSTRATIONS ON SHEETS 3 AND 4.

3. FABRICATE BLOCKING “B”, ONE REQUIRED, SIZE: 13-1/2 X 5-1/2 X 1 NOM. FOR FABRICATION, SEE

ILLUSTRATIONS ON SHEETS 3 AND 4.

4. SECURE BLOCKING “A”THROUGH BLOCK “A” INTO BLOCKING “B” USING NAILS, ASTM-F 1667, NUMBER 6 AND SECURE BLOCKING “A” AND “B” ASSEMBLY IN BOTTOM OF CONTAINER USING NAILS, ASTM-F 1667, NUMBER 6. SECURE ASSEMBLY THROUGH BOTH BLOCKING “A’s” INTO CONTAINER WALLS AT SIDE BATTONS. FOR FABRICATION AND PLACEMENT, SEE ILLUSTRATIONS ON SHEETS 3

AND 4.

5. FABRICATE BLOCKING “C”, ONE REQUIRED, SIZE: 15-1/16 X 2 NOM. X 4 NOM. FOR PLACEMENT, SEE

ILLUSTRATION ON SHEET 4.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 4 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

12529095 19207 AXLE, REAR 19207 AK15744828

MARCH 9, 2016

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 4 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

12529095 19207 AXLE, REAR 19207 AK15744828

MARCH 9, 2016

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 4 of 4 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT