Special_Packaging_Instruction_AK10737693.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12267837 (19207) COVER, TRANSMISSION 19207 AK10737693

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-073-7693 11-19-2008 C

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 79.0 2.287 25.0 X 24.7 X 6.4

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 1B 1 PRESERVATIVE: MIL-PRF-3420, TYPE I, CLASS 2,

13. CLEANING SIZE: 36 X 36.

MIL-STD-2073-1D 2C 1 CUSHIONING: ASTM-D4727, TYPE CF. SEE PAGE 2.

14. DRYING 3C 1 CUSHIONING: ASTM-D4727, TYPE CF. SEE PAGE 2.

MIL-STD-2073-1D 4E 1 CONTAINER: ASTM-D5118, STYLE FOL, TYPE CF,

GRADE 350, CLASS DOM,

15. PACKING SIZE: 23-1/4 X 4-3/4 X 23-1/4.

a. LEVEL A 5F 1 BAG: MIL-DTL-117, STYLE 1, TYPE 1, CLASS E, MIL-STD-2073-1D AND NOTE H SIZE: 32 X 31.

b. LEVEL B 6G 1 CONTAINER: ASTM-D5118, STYLE FOL, TYPE CF, MIL-STD-2073-1D AND NOTE H CLASS WR, GRADE V3c,

16. MARKING SIZE: 24 X 5-1/2 X 24-1/4.

MIL-STD-129

17. NOTES / DRAWING

A. THE CIRCLED NUMBERS ON THE ACCOMPANYING PAGES REFERENCE THE STEPS.

B. WRAP THE PART, AND SECURE IT WITH TAPE.

C. USING A GOOD GRADE OF COMMERCIAL ADHESIVE, LAMINATE TO THE SPECIFIED THICKNESS.

D. CENTER THE PREPARED COVER, TRANSMISSION BETWEEN THE CUSHIONING FROM STEPS 2 AND 3.

ENSURE THAT THE CUT OUT PORTION OF THE CUSHIONING FROM STEPS 2 AND 3 FITS OVER THE

CORRESPONDINGLY SIZED CENTER PORTION OF THE COVER, TRANSMISSION.

E. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B1, 4B3, 0R 4B4.

F. CLOSE THE BAG BY HEAT SEALING.

G. CLOSE THE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 4B2.

H. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-

HDBK-774 MAY BE USED FOR GUIDANCE.

I. INSPECT THE PRESERVATION, THE UNIT PACK, AND THE PACKING, IN ACCORDANCE WITH MIL-STD-2073-

1D AND THE APPLICABLE CONTAINER SPECIFICATION.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12267837 (19207) COVER, TRANSMISSION 19207 AK10737693

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-073-7693 11-19-2008 C

11-1/2

11-1/2

5-5/8 DIA

1/4

11-1/2

11-1/2

5-1/4 DIA

1-1/2

1/4