SPI_AK12073577.pdf
PDF 188 KB Posted
- Attached to
- Impeller, Fan, Axial Federal contract opportunity
- Solicitation number
- SPRDL119Q0236
About this file
Special Packaging Inatructions
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL119Q0236-0001.pdf | ||
| SPRDL119Q0236.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
26972 (56231) IMPELLER, FAN, AXIAL 19207 AK12073577
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4140-01-207-3577 11-10-2005 B
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 18.2 1.043 19.0 X 18.6 X 5.1
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 31 1A 1 WRAP: MIL-PRF-121, TYPE I, SIZE: 90 X 24.
13. CLEANING 2B 1 CUSHIONING: ASTM-D4727, TYPE CF, CLASS D,
MIL-STD-2073-1D SEE PAGE 2.
14. DRYING 3B 1 CUSHIONING: ASTM-D4727, TYPE CF, CLASS D,
MIL-STD-2073-1D SEE PAGE 2.
4B 2 TAPE: ASTM-D5330, TYPE III, SIZE: 3/4 X 54.
15. PACKING 5C 1 BAG: MIL-DTL-117, TYPE II, CLASS C, SIZE: 25 X 27.
a. LEVEL A 6D 1 CONTAINER: ASTM-D5118, TYPE CF, CLASS WR, MIL-STD-2073-1D AND NOTE E STYLE RSC, VARIETY SW, GRADE W5c,
b. LEVEL B SIZE: 18-1/4 X 4-7/8 X 18-1/4.
MIL-STD-2073-1D AND NOTE E
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. WRAP PART WITH WRAP.
B. SECURE PADS TOGETHER AROUND PREPARED PART AND SECURE WITH TAPE.
C. CLOSE BAG BY HEAT SEALING.
D. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
E. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.
MIL-HDBK-774 MAY BE USED FOR GUIDANCE.
F. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
26972 (56231) IMPELLER, FAN, AXIAL 19207 AK12073577
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4140-01-207-3577 11-10-2005 B
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
3B
1/4 1-1/4
11 DIA.
1/4 1-1/4
9-1/8 DIA.
2B 3B
LAMINATE TO DESIRED THICKNESS USING A GOOD QUALITY COMMERCIAL ADHESIVE.
2B
4B
2 PLACES
P/N: 26972
File details come from the government source that posted it.