Special_Packaging_Instructions_AK15973752.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. PG200016G (3PSD7) HYDRAULIC CYLINDER 19207 AK15973752

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-597-3752 11/28/2012 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 519.0 12.218 91.0 X 14.5 X 16.0

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 20

13. CLEANING 1-B A/R PRESERVATIVE: MIL-PRF-10924

MIL-STD-2073-1D 2-C A/R CAPS/PLUGS: NAS-847

14. DRYING 3-D A/R PRESERVATIVE: MIL-PRF-16173, GR 4

MIL-STD-2073-1D 4-E 1 WRAP: MIL-PRF-121, TY II, SIZE: 36 X 96

15. PACKING

5-F 18 BLOCKING/BRACING: ASTM-D6199

6-G 1 CONTAINER: ASTM-D6251, TY III, CL 2, ST A,

a. LEVEL A

MODIFIED, SIZE: 88 X 13 X 8-3/4

MIL-STD-2073-1D & NOTE H

b. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 & NOTE I

17. NOTES:

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE

PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. APPLY PRESERVATIVE THROUGH ALL GREASE (ZERK) FITTINGS.

C. SEAL ALL OPENINGS WITH CAPS/PLUGS OF APPROPRIATE SIZE.

D. APPLY PRESERVATIVE TO ALL UNPAINTED, UNPLATED METALLIC SURFACES.

E. WRAP CYLINDER IN GREASE PAPER, SECURE WITH TAPE ASTM-D6123.

F. LUMBER SIZES ARE NOMINAL UNLESS OTHERWISE SPECIFIED, SECURE APPLICABLE BLOCKING

TOGETHER AND/OR TO THE INTERIOR OF THE CONTAINER USING NAILS/STAPLES CONFORMING TO

ASTM-F1667, SEE PAGE 2 FOR SIZES AND ORIENTATION.

G. CONTAINER IS MODIFIED TO ALLOW FOR UN-NAILED TOP PANEL CLOSURE IN ACCORDANCE WITH ASTM-

D6251. CLOSE CONTAINER IN ACCORDANCE WITH CONTAINER SPECIFICATION.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

I. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND SIDES WITH MINIMUM 1/2 INCH HIGH BLACK LETTERS "REUSABLE CONTAINER, DO NOT DESTROY". IN ADDITION, THE TOP AND ENDS SHALL BE MARKED "REMOVE LAG SCREWS TO OPEN CONTAINER" USING

1/2 INCH HIGH BLACK LETTERS.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collect ion of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

PG200016G (3PSD7) HYDRAULIC CYLINDER 19207 AK15973752

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

3040-01-597-3752 11/28/2012 A

17. NOTES:

ITEM SIZE QTY REFERENCE

A 2 X 8 X 13 2 ASTM-D6199

B 2 X 4 X 13 4 ASTM-D6199

C 4 X 4 X 5-3/4 4 ASTM-D6199

D 1 X 4 X 8-3/4 8 ASTM-D6199

36 X 96 GREASE PAPER 1 MIL-PRF-121, TY II

88 X 13 X 8-3/4 CRATE 1 ASTM-D6251, TY III, CL 2, ST A

C

B

A

FOR CLARITY ITEM IS

SHOWN WITHOUT

GREASE PAPER WRAP

D