EH9C0429EH-_SPI.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. CS3006 (K0824) FUNCTION BLOCK ASSEMBLY 19207 AK92802528

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-99-280-2528 11/27/2013

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 22.6 0.675 12.9 X 10.9 X 8.3

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42

13. CLEANING 1-B A/R PRESERVATIVE: OPERATIONAL FLUID.

MIL-STD-2073-1D 2-C A/R CAPS/PLUGS: NAS-847

14. DRYING 3-D 1 WRAP: MIL-PRF-121, TY II, SIZE: 16 X 24

MIL-STD-2073-1D 4-E 8 CUSHIONING: A-A-59136, CL 1, GR A,

15. PACKING

2.0# DENSITY

5-F 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D,

a. LEVEL A

GR 275, VR SW, SIZE: 11-1/4 X 9-1/4 X 6-3/4

MIL-STD-2073-1D & NOTE I 6-G 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 20 X 22

b. LEVEL B

7-H 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,

MIL-STD-2073-1D & NOTE I GR W5c, VR SW, SIZE: 12-1/2 X 10-1/2 X 7-1/2

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. FILL WITH OPERATIONAL FLUID.

C. SEAL ALL OPENINGS TO INTERIOR WITH CAPS/PLUGS OF APPROPRIATE SIZE.

D. WRAP ITEM IN GREASE PAPER SECURE WITH TAPE ASTM-D6123.

E. SEE PAGES 2 – 4 FOR SIZES AND ORIENTATION.

F. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

G. CLOSE BAG BY HEAT SEAL.

H. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.

I. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -AI

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

CS3006 (K0824) FUNCTION BLOCK ASSEMBLY 19207 AK92802528

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-99-280-2528 11/27/2013

PACKAGING MATERIALS

ITEM SIZE QTY REFERENCE

A 8-3/4 X 4-3/4 X 2" THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 6 X 4-3/4 X 1" THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 9-1/4 X 4-3/4 X 1" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 9-1/4 X 11-1/4 X 1" THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

E 9-1/4 X 4 X 1" THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

F 9-1/4 X 11-1/4 X 1/4" THICKNESS 1 A-A-59135, CL 1, GR A

FUNCTION BLOCK ASSEMBLY

PACKAGING PROCEDURE

STEP 1 - PLACE ITEM E ON BOTTOM OF CONTAINER AS SHOWN BELOW

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

CS3006 (K0824) FUNCTION BLOCK ASSEMBLY 19207 AK92802528

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-99-280-2528 11/27/2013

STEP 2 - PLACE ITEM F OVER ITEM E AS SHOWN BELOW

STEP 3 - PLACE ITEMS C AND B AS SHOWN BELOW

STEP 4 - PLACE FUNCTION BLOCK ASSEMBLY AS SHOWN BELOW

ITEM SHOWN WITHOUT WRAP

FOR CLARITY

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

CS3006 (K0824) FUNCTION BLOCK ASSEMBLY 19207 AK92802528

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-99-280-2528 11/27/2013

STEP 5 - PLACE ITEM A AS SHOWN BELOW

STEP 6 - PLACE ITEM D AS SHOWN BELOW

STEP 7 - CLOSE DOMESTIC CARTON, FLATTEN ALL CORNERS, BAG AND PLACE IN WR CARTON

DOM CARTON

BAGGED

ITEM SHOWN WITHOUT WRAP

FOR CLARITY