SPI_RCSK_17305.pdf

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 4 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-DT

DF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

RCSK 17305 (34623) AXLE ASSEMBLY 19207 AK14165217

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-421-5217 JULY 05, 2018 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 92.0 2.578 20.8 X 16.6 X 12.9

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 42 1-C A/R INTERIOR PRESERVATIVE: OPERATIONAL FLUID.

13. CLEANING 2-D A/R EXTERIOR PRESERVATIVE: MIL-PRF-3150.

MIL-STD-2073-1E 3-E 3 WRAP: MIL-PRF-121, TYPE I, SIZE: 12 X 12

14. DRYING 4-F 7 CUSHIONING: ASTM D4727, TYPE CD, CL. DOM.

MIL-STD-2073-1E 5-G 1 CONTAINER: ASTM D5118, TYPE CF, CL. DOM., GR. 275,

STYLE FOL, SIZE: 15-7/8 X 12-1/8 X 18-3/4.

15. PACKING 6-H 1 BAG: MIL-DTL-117, TYPE II, CL. E, STYLE 1, SIZE: 34 X 31.

a. LEVEL A 7-I 1 CONTAINER: ASTM D5118, TYPE CF, CL. WR, GR. V3c, MIL-STD-2073-1E AND NOTE K STYLE RSC, SIZE: 16-3/8 X 12-5/8 X 20-1/4.

b. LEVEL B

MIL-STD-2073-1E AND NOTE K

16. MARKING

MIL-STD-129 AND NOTE J

17. NOTES / DRAWING

A. PRESERVATION, PACKAGING, PACKING AND MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1E.

B. DURING THE CLEANING PROCESS, THE PRESERVATIVE OIL SHALL NOT BE REMOVED FROM THE MACHINE

SURFACES UNLESS CONTAMINATION HAS OCCURRED.

C. INTERIOR PRESERVATION (TO BE PERFORMED ONLY IF THE PRESERVATION HAD NOT ALREADY BEEN

ACCOMPLISHED AT TIME OF MANUFACTURING. INSPECTION SHALL BE MADE TO ENSURE THAT ASSEMBLY HAS BEEN PROPERLY DRAINED): REMOVE PLUG AND FILL AXLE ASSEMBLY TO OPERATING LEVEL WITH OPERATIONAL FLUID. ROTATE INTERNAL MECHANISM SUFFICIENTLY TO PROVIDE COMPLETE COVERAGE

OF ALL INTERNAL SURFACES. DRAIN ASSEMBLY AND REPLACE PLUG.

D. APPLY PRESERVATIVE TO EXTERIOR UNPAINTED AND UNPLATED METALLIC SURFACES.

E. WRAP EXTERIOR PRESERVED SURFACES AND SECURE WRAPS USING TAPE.

F. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE SKETCHES ON PAGES 2 AND 3.

G. FOR EASE OF PACKING ITEM, IT IS SUGGESTED TO FOLLOW PROCEDURES AS WRITTEN BELOW. PLACE

PADS “A”, TWO PIECES, LENGTHWISE INTO DEPTH OF BOX. PAD “B” SHALL BE PLACED BETWEEN PADS “A” INTO BASE OF BOX. PLACE ITEM INTO CONTAINER AT THIS POINT. SLIDE PADS “C”, TWO PIECES, INTO APPROPRIATE POSITION IN ACCORDANCE WITH SKETCH ON PAGE 3. PAD “E” IS TO BE PLACED ON TOP OF

PAD ”D”. CLOSURE SHALL BE IN ACCORDANCE WITH CONTAINER SPECIFICATION.

H. PLACE BOXED ITEM INTO BAG. CLOSE BAG BY HEAT SEALING.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 4 Pages

I. CLOSE CONTAINER WITH TAPE IN ACCORDANCE WITH CONTAINER SPECIFICATION. METAL FASTENERS

SHALL NOT BE USED IN THE CONSTRUCTION OF THE CONTAINER.

J. THE UNIT CONTAINER SHALL ALSO BE MARKED ON THE TOP AND ONE SIDE, IN ACCORDANCE WITH MIL-

STD-129 SPECIAL MARKINGS, “REUSABLE CONTAINER AND CUSHIONING, DO NOT DESTROY. OPEN ALONG

TAPE SEAMS, AS NEEDED, USING SHALLOW-BLADED KNIFE.”

K. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR,

CONFORMING TO ASTM-D5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

-DT

DF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

RCSK 17305 (34623) AXLE ASSEMBLY Error!

Bookmark not defined.

19207 AK14165217

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-416-5217 JULY 05, 2018 A

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 4 Pages

NOTES:

1. FABRICATE PADS “A”, TWO PIECES REQUIRED, USING VARIETY TW AS SHOWN ON PAGE 4.

2. FABRICATE DIECUT “B”, USING B1, THICKNESS 1-1/8; B2, THICKNESS 2-1/4; GRADE 275 MINIMUM

AND GOOD QUALITY WATERPROOF ADHESIVE.

3. FABRICATE DIECUT “C”, USING C1, THICKNESS 1-1/8; C2, THICKNESS 1-1/8; GRADE 275 MAXIMUM

AND GOOD QUALITY WATERPROOF ADHESIVE.

4. FABRICATE DIECUT “D” TO THICKNESS 2-1/4, GRADE 275 MINIMUM USING A GOOD QUALITY

WATERPROOF ADHESIVE AS SHOWN ON PAGE 4.

5. FABRICATE PAD “E” USING VARIETY TW AS SHOWN ON PAGE 4.

6. ALL DIMENSIONS ARE IN INCHES.

OMB No. 0704-0188

-DT

DF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

RCSK 17305 (34623) AXLE ASSEMBLY Error!

Bookmark not defined.

19207 AK14165217

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 4 Pages

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 4 Pages

OMB No. 0704-0188

-DT

DF

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

RCSK 17305 (34623) AXLE ASSEMBLY Error!

Bookmark not defined.

19207 AK14165217

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 4 Pages