AK13382570.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-PL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

57K3049 (19207) TRANSFER CASE WITH CONTAINER 19207 AK13382570

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-01-338-2570 12/18/2017 A

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

001 NONE 1,680.0 48.318 47.50 X 39.50 x 44.5

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 55 1-B INTERNAL PRESERVATIVE: OPERATIONAL LUBRICANT

13. CLEANING

MIL-STD-2073-1E 2-C EXTERNAL PRESERVATIVE: MIL-PRF-16173, GRADE 4

14. DRYING

MIL-STD-2073-1E 3-E DESICCANT: MIL-D-3464, TY I (48 UNITS)

15. PACKING 4-F CONTAINER: P/N: 12436555 CAGE: 19207

A. LEVEL A

MIL-STD-2073-1E AND NOTE F

B. LEVEL B

NOT APPLICABLE

16. MARKING

MIL-STD-129 AND NOTE G

17. NOTES / DRAWING

CONSISTS OF: 1 EA. - TRANSFER CASE, P/N: 193476OU, CAGE: 19207, WEIGHT: 1,000 LBS.

1 EA. - REUSABLE CONTAINER, P/N: 12436555, CAGE: 19207, WEIGHT: 680 LBS.

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1E.

2. INSPECT THE CONTAINER IN ACCORDANCE WITH A-A-52462, INCLUDING THE FIRST ARTICLE INSPECTION

REQUIREMENT.

B. FILL TRANSFER CASE TO OPERATING LEVEL. ROTATE MECHANISM TO ENSURE 100% COVERAGE OF PRESERVATIVE ON INTERNAL SURFACES. REMOVE DRAIN PLUG AND DRAIN EXCESS PRESERVATIVE.

REPLACE DRAIN PLUG SECURELY.

(NOTE: IF TRANSFER CASE HAS BEEN PREVIOUSLY RUN BY THE MANUFACTURER AND ALL INTERIOR

SURFACES HAVE BEEN COATED WITH THEIR APPROVED LUBRICANT, NO ADDITIONAL INTERNAL

PRESERVATION IS REQUIRED.)

C. APPLY TO UNPAINTED, UNPLATED EXTERIOR METALLIC SURFACES.

D. PACK TRANSFER CASE INTO REUSABLE CONTAINER IN ACCORDANCE WITH THE INSTALLATION DECAL

LOCATED ON THE REUSABLE CONTAINER USING SUPPLIED HARDWARE.

E. PLACE 48 DESICCANT UNITS INTO DESICCANT BASKET AND CLOSE DESICCANT PORT COVER.

F. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

G. THE FOLLOWING SPECIAL MARKING SHALL BE APPLIED:

TRANSFER CASE ASSEMBLY SERIAL NUMBER SHALL BE STENCILED ON THE CONTAINER IN ACCORDANCE

WITH MIL-STD-129.