SPI_distribution_box.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-FO

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12463100 (19207) DISTRIBUTION BOX 19207 AK14633913

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

6110-01-463-3913 10/06/2011 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EA NONE 82.1 4.395 30.4 X 20.6 X 12.1

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42

13. CLEANING 1B CAP,DUST: SEE NOTE

MIL-STD-2073-1D 2C CUSHIONING: ASTM D4727, TYPE CF, CLASS DOM,

14. DRYING VARIETY SW, GRADE 275

MIL-STD-2073-1D 3 CONTAINER: ASTM D5118, STYLE RSC, TYPE CF,

15. PACKING

CLASS DOM, VARIETY SW, GRADE 275

SIZE: 19-3/4 X 11-1/4 X 28-5/8

a. LEVEL A

4 CLOSURE: ASTM D1974, METHOD 2B6

MIL-STD-2073-1D AND NOTE D 5 BARRIER: MIL-DTL-117, STYLE 1, TYPE 1, CLASS E

b. LEVEL B

SIZE: 33 X 44

MIL-STD-2073-1D AND NOTE D 6 CONTAINER: ASTM D5118, STYLE RSC, TYPE CF

16. MARKING GRADE V3c SIZE: 20-1/4 X 11-3/4 X 29-5/8

MIL-STD-129 7 CLOSURE: ASTM D1974, METHOD 2B6

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1D.

2. PACKING SHALL BE INSPECTED IN ACCORDANCE WITH THE APPLICABLE CONTAINER SPECIFICATION AND

MIL-STD-1186.

B. CONNECTOR OPENINGS SHALL BE COVERED WITH PLASTIC DUST CAPS CONFORMING TO NAS 847 OR

MS90376, SIZES AS REQUIRED.

C. FOR DETAILS OF CUSHIONING, BLOCKING AND PLACEMENT OF ITEM WITHIN CONTAINER SEE SHEETS 2 AND 3.

D. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING EITHER CLEATED-PLYWOOD BOXES, CLASS 2, TYPE III CONFORMING TO ASTM D6251, OR NAILED WOOD BOXES CONFORMING TO ASTM D6880, HEAVY DUTY.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING; FIBERBOARD BOXES, WEATHER-RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CONFORMING TO ASTM D5168 OR PALLET BASE CONTAINERS, TYPE III, CONFORMING TO MIL-B-43666. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR THE

THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATOIN EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE IN PALLETIZED UNIT LOADS. PALLET HEIGHTS EXCEEDING 652 INCHES AND UNSUPPORTED LOADS EXCEEDING PALLET DIMENSIONS ARE PROHIBITED. PALLET HEIGHTS EXCEEDING 41 INCHES ARE PROHIBITED FOR OVERSEAS DESTINATIONS. GLUED LAODS AND LOADS EXCEEDING 2500 POUNDS SHALL NOT BE USED. UNTREATED, 4-WAY (PARTIAL) PALLETS CONFORMING TO NN-P-71, SIZE 40 X 48 SHA BE USED. PARTIAL 4 WAY (CATEGORY 1) MULTIPLE USE (TYPE 2) PALLETS CONFORMING TO ASME

MH1.8 ARE ACCEPTABLE FOR DOMESTIC SHIPMENT.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12463100 (19207) DISTRIBUTION BOX 19207 AK14633913

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

6110-01-463-3913 10/06/2011 A

17.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12463100 (19207) DISTRIBUTION BOX 19207 AK14633913

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

6110-01-463-3913 10/06/2011 A

18.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages