SPI_202.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

*12371072 (19207) VALVE ASSEMBLY 19207 AK12461173

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4810-01-246-1173 1-27-2007 -

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

001 NONE 47.1 0.689 17.1 X 13.3 X 5.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 SEE NOTES.

13. CLEANING

MIL-STD-2073-1D

14. DRYING

MIL-STD-2073-1D

15. PACKING

a. LEVEL A

MIL-STD-2073-1D AND NOTE F

b. LEVEL B

MIL-STD-2073-1D AND NOTE F

16. MARKING

MIL-STD-129

17. NOTES / DRAWING *Also P/N 12288294

A. APPLY PRESERVATIVE TO ALL BARE FERROUS SURFACES.

B. WRAP P/N: 12371072 WITH WRAP AND SECURE WITH TAPE.

C. PLACE PADS, ITEMS 3A, 3B, AND 3C, AROUND PART 12371072 AND PLACE IT IN CONTAINER, ITEM 4, AS

SHOWN ON PAGE 2. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

D. PLACE BAG, ITEM 5, OVER PREPARED PART FROM NOTE C AND CLOSE BY HEAT SEALING.

E. PLACE PREPARED PART FROM NOTE D INTO CONTAINER, ITEM 6, AND CLOSE IN ACCORDANCE WITH

ASTM-D1974, METHOD 2B3.

F. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO

ASTM-D6251, TYPE III, CLASS 1.

LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND

REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.

FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME

DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-

HDBK-774 MAY BE USED FOR GUIDANCE.

G. INSPECT THE PRESERVATION, THE UNIT PACK, AND THE PACKING IN ACCORDANCE WITH MIL-STD-

2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12371072 (19207) VALVE ASSEMBLY 19207 AK12461173

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4810-01-246-1173 1-27-2007 -

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages

OMB No. 0704-0188

-CC

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12371072 (19207) VALVE ASSEMBLY 19207 AK12461173

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

4810-01-246-1173 1-27-2007 -

BILL OF MATERIALS

ITEM

NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.

1 PERSERVATIVE A/R MIL-PRF-32033 A/R

2 WRAP 30 X 30 MIL-PRF-121, TYPE II. 1

3 PAD ASTM-D4727, TYPE CF, CLASS D,

VARIETY SW, GRADE 350.

3A SEE PAGE 2 1

3B SEE PAGE 2 1

3C SEE PAGE 2 1

4 CONTAINER 15-1/2 X 11-7/8 X 3-1/2 ASTM-D5118, TYPE CF, CLASS D,

STYLE RSC, VARIETY SW, GRADE 350.

5 BAG 20 X 24 MIL-DTL-117, TYPE I, CLASS E,

STYLE 1.

6 CONTAINER 12-3/4 X 4-3/4 X 16-1/8 ASTM-D5118, TYPE CF, CLASS WR,

STYLE FOL, VARIETY SW,

GRADE W5c.