SPI_SPRDL1-18-R-0323.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

XSL

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

8350580 (19207) COVER ASSEMBLY 19207 AK07849294

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

2520-00-784-9294 7-7-2017 G

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

001 NONE 58.00 1.094 21.5 X 21.5 X 4.5

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1E, METHOD 42 1-B A/R PRESERVATIVE (VCI): MIL-PRF-3420, CLASS 2, STYLE B

13. CLEANING 2-B A/R INTIMATE WRAP: MIL-PRF-121, TYPE I

MIL-STD-2073-1E 3-C A/R CUSHIONING: ASTM D4727

14. DRYING 4-D 1 CONTAINER: ASTM D5118, TY CF, CL DOM, ST RSC

MIL-STD-2073-1E 5-E 1 BAG: MIL-DTL-117, TY I, CL E, ST 1

6-D 1 CONTAINER: ASTM D5118, TY CF, CL WR, GR W5c,

15. PACKING ST RSC

a. LEVEL A

MIL-STD-2073-1E AND NOTE G

b. LEVEL B

MIL-STD-2073-1E AND NOTE G

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1E.

2. INSPECT PACKING IN ACCORDANCE WITH MIL-STD-1186 AND APPLICABLE CONTAINER

B. SINGLE WRAP REQUIRED.

C. FIBERBOARD FILLER PADS AND/OR DIECUTS SHALL BE DEVISED AND UTILIZED TO IMMOBILIZE ITEM AND

PREVENT DAMAGE TO ITEM AND CONTAINER.

D. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D1974, METHOD 2B3.

E. CLOSE BAG BY HEAT SEALING.

F. PACKING:

G. LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS CGWR, CONFORMING TO ASTM-D 5168.

CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS

REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS

WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

H. NOTE: UNIT WT., CU., AND SIZES ARE ESTIMATES AND ARE PROVIDED FOR INTERNAL GOVERNMENT PLANNING

PURPOSES ONLY.