SPI_AK16332049_Final_Drive.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

JS

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

. 12542293 (19207) FINAL DRIVE 19207 AK16332049

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-633-2049 May 25, 2017

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 620.0 15.349 37.0 X 24.3 X 29.5

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 20

13. CLEANING 1-B-D ASREQ PRESERVATIVE: MIL-PRF-21260, GR 10

MIL-STD-2073-1

14. DRYING 2-C ASREQ CAPS/PLUGS: NAS 847

MIL-STD-2073-1

15. PACKING

3-E BLOCKING/BRACING: ASTM D6199, GROUP I OR II

a. LEVEL A

4 ASREQ BARRIER WRAP: MIL-PRF-121, TY II

MIL-STD-2073-1 & NOTE G

b. LEVEL B

5-F 1 CONTAINER: ASTM D6251 TY III, CL 2, ST A,

NOT APPLICABLE SIZE: 34-1/2 X 21-3/4 X 23

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. FLUSH INTERNALLY WITH PRESERVATIVE, ROTATE TO ENSURE COMPLETE COVERAGE AND DRAIN. IF INTERNAL PRESERVATION IS ACCOMPLISHED DURING MANUFACTURE, AND IF MEASURES HAVE BEEN

TAKEN TO PREVENT CONTAMINATION, INTERNAL PRESERVATION SHALL NOT BE REPEATED.

C. SEAL ALL OPENINGS TO THE INTERIOR OF THE FINAL DRIVE WITH CAPS/PLUGS OF THE APPROPRIATE

SIZE.

D. APPLY PRESERVATIVE TO BARE METAL EXTERNAL SURFACES.

E. POSITION UPRIGHT SUPPORT BLOCKS “H” IN THE CONTAINER AS SHOWN ON PAGE 3.

FABRICATE SUB-FRAME COMPOSED OF BLOCKS “D” AND “E”, REST DIRECTLY ON THE UPRIGHT

SUPPORT BLOCKS “H” AND SECURE TO THE INSIDE OF THE CONTAINER.

APPLY BARRIER WRAP TO BLOCKS “A”, “B”, AND “G”. SECURE WITH TAPE.

ASSEMBLE BLOCKS “A” AND “B” AS SHOWN ON PAGE 3. END GRAIN NAILING SHALL BE PERMITTED

BETWEEN ITEMS “A” AND “B”. DO NOT NAIL COMPONENTS “A” AND “B” TO WOOD BOX.

SECURE BLOCKS “G” AS SHOWN ON PAGE 3, ENSURING THE EDGES ARE FLUSH WITH THE CONTAINER

WALLS.

SECURE FOAM STRIPS “C”, “F”, AND “J” TO THE INSIDE OF THE CONTAINER AS SHOWN ON PAGE 3.

BLOCKING SHALL BE SECURED INSIDE CONTAINER USING ASTM F1667 NAILS.

F. CONTAINER IS CONSTRUCTED OF ALL 1/2-INCH THICK PLYWOOD AND 1 INCH THICK NOMINAL LUMBER.

SIZE AND APPLICATION OF SKIDS ARE IN ACCORDANCE WITH ASTM D6251.

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12542293 (19207) FINAL DRIVE 19207 AK16332049

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-633-2049 May 25, 2017

17. NOTES/DRAWING (Continued)

G. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

17.

BLOCK DESCRIPTION NOMINAL SIZE ACTUAL SIZE QTY.

A LUMBER: ASTM D6199, GROUP I OR II 2 X 10 (MODIFIED TO 8-3/4) 21-3/4 2

B LUMBER: ASTM D6199, GROUP I OR II 2 X 10 (MODIFIED TO 8-3/4) 31-1/2 2

C A-A-59136, CLASS 1, GR A, TY I 1 X 1-1/2 21-3/4 1

D LUMBER: ASTM D6199, GROUP I OR II 2 X 4 21-3/4 2

E LUMBER: ASTM D6199, GROUP I OR II 2 X 4 31-1/2 2

F A-A-59136, CLASS 1, GR A, TY I 1 X 1-1/2 11 2

G LUMBER: ASTM D6199, GROUP I OR II 1 X 4 22-7/8 2

H LUMBER: ASTM D6199, GROUP I OR II 2 X 4 9-1/4 8

J A-A-59136, CLASS 1, GR A, TY I, 1 X 1-1/2 9 1

DETAIL A 1-1/8

22-7/8

REF

9-3/4

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

12542293 (19207) FINAL DRIVE 19207 AK16332049

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2520-01-633-2049 May 25, 2017

17. NOTES/DRAWING (Continued)

18.

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages

A

B

C

D

E

H J

9-3/16

DETAIL A

(2 PLC)

15-1/2

(2 PLC)

9-1/8

(2 PLC)

G

F