SPI_2865700.pdf
PDF 154 KB Posted
- Attached to
- Relay Box Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-18-R-0182
About this file
SPI 2865700
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL118R0182.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12345341 (19207) RELAY ASSEMBLY 19207 AK12865700
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
5945-01-286-5700 4-19-2005 B
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 23.7 2.013 18.6 X 14.5 X 12.9
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 42 SEE NOTES
13. CLEANING
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE G
b. LEVEL B
MIL-STD-2073-1D AND NOTE G
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. REFER TO THE BILL OF MATERIALS FOR CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON THE
ACCOMPANYING PAGES.
B. WRAP RELAY BOX ASSEMBLY WITH WRAP, ITEM 1, AND SECURE WITH TAPE.
C. POSSITION ASSEMBLED PAD, ITEM 2B, AND PAD, ITEM 2A, AROUND RELAY BOX ASSEMBLY AS SHOWN
ON PAGE 2.
D. PLACE PREPARED RELAY BOX ASSEMBLY INTO CONTAINER, ITEM 4. CLOSE CONTAINER IN
ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
E. PLACE CONTAINER FROM NOTE D INTO BAG, ITEM 5, AND CLOSE BAG BY HEAT SEALING.
F. PLACE CUSHIONING, ITEM 6, ON CORNERS OF BAGGED ITEM, FROM NOTE E, AND INSERT INTO
CONTAINER, ITEM 7. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
G. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED.
MIL-HDBK-774 MAY BE USED FOR GUIDANCE.
H. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH
MIL-STD-2073-1D AND THE APPLICABLE CONTAINER SPECIFICATION.
OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12345341 (19207) RELAY ASSEMBLY 19207 AK12865700
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
5945-01-286-5700 4-19-2005 B
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages
2B
SCORE LINE
FLUTE DIRECTION5
4-3/4
11-3/8 13-3/4
15-3/4
REVERSE SLIT SCORE
ILLUSTRATION
CUSHIONING
2A
2B P/N: 12345341
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages
OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12345341 (19207) RELAY ASSEMBLY 19207 AK12865700
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
5945-01-286-5700 4-19-2005 B
BILL OF MATERIALS
ITEM
NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.
1 WRAP 30 X 18 A-A-3174, POLYETHYLENE,
THICKNESS 4 MIL.
2 PAD ASTM-D4727, TYPE CF, CLASS D,
VARIETY TW, GRADE 1100.
2A 7 X 5 1
2B SEE PAGE 2. 1
3 TAPE 1/2 X A/R. ASTM-D5330, TYPE III. A/R
4 CONTAINER 12 X 7-5/8 X 5-3/4 ASTM-D5118, TYPE CF, CLASS D,
STYLE RSC, VARIETY SW, GRADE 275.
5 BAG 16 X 21 MIL-DTL-117, TYPE II, CLASS E. 1
6 CUSHIONING SEE PAGE 2 A-A-59136, CLASS 1, GRADE A,
TYPE I.
7 CONTAINER 18-1/4 X 14-1/8 X
12-1/8
ASTM-D5118, TYPE CF, CLASS WR,
STYLE RSC, VARIETY SW GRADE W5c.
File details come from the government source that posted it.