SPI_AK15686243.pdf

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Designed using Perform Pro, WHS/DIOR, Jun 97

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BK

NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, Gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of Information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB Control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

422542 (05BU0) EXTINGUISHER, FIRE 19207 AK15686243

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-568-6243 10/19/2017 -

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 30.0 1.982 23.7 X 12.9 X 11.2

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1, METHOD 42

13. CLEANING 1-B 1 BARRIER: MIL-PRF-121, TY II, SIZE: 3 X 6

MIL-STD-2073-1 2-C A/R CUSHIONING: A-A-59136, CL 1, GR A, 2.0# DENSITY

14. DRYING 3-D A/R BLOCKING/BRACING: A-A-55057, TY A

MIL-STD-2073-1 4-E 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D

15. PACKING GR 275, VR SW, SIZE: 22-3/4 X 12 X 9-1/2

5-F 1 BAG: MIL-DTL-117, TY I, CL E, ST 1, SIZE: 35 X 26

a. LEVEL A

6-G 1 CONTAINER: ASTM-D5118, TY CF, ST RSC, CL WR,

MIL-STD-2073-1 & NOTE I GR W5c, VR SW, SIZE: 23-1/4 X 12-1/2 X 10-3/8

b. LEVEL B

MIL-STD-2073-1 & NOTE I

16. MARKING

MIL-STD-129 & NOTE H

17. NOTES/DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. BARRIER MATERIAL SHALL BE PLACED TO PREVENT ITEM FROM COMING IN CONTACT WITH

CONTAINER LUMBER.

C. SEE TABLE 1 AND FIGURES 1 & 2 FOR SIZES AND ORIENTATION.

D. SECURE BLOCKING TOGETHER USING STAPLES CONFORMING TO ASTM-F1667, SEE TABLE 1 AND

FIGURES 1-3 FOR SIZES AND ORIENTATION.

E. CLOSE INNER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.

F. CLOSE BAG BY HEAT SEAL.

G. CLOSE OUTER CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B1.

H. ADDITIONAL MARKINGS WILL BE INCLUDED FOR THE FIRE EXTINGUISHER DENOTING ITEM AS

HAZARDOUS CLASS 2.2 IN ACCORDANCE WITH CFR TITLE 29, 40 AND 49.

I. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D

6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS,

EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

422542 (05BU0) EXTINGUISHER,FIRE 19207 AK15686243

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-568-6243 10/19/2017 -

TABLE 1 – BILL OF MATERIAL

ITEM SIZE QTY SPECIFICATION

A 22-3/4 X 12 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

B 10 X 7-1/2 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

C 5-1/2 X 13 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

D 5-1/2 X 13 X 2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

E 22-3/4 X 7-1/2 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

F 6-1/4 X 7-1/2 X 3/4” THICKNESS 2 A-A-55057, TY A

G 9-5/8 X 7-1/2 X 3/4” THICKNESS 1 A-A-55057, TY A

H 6-1/4 X 7-1/2 X1/2” THICKNESS 1 A-A-55057, TY A

I 13-1/8 X 10 X 1” THICKNESS 2 A-A-59136, CL 1, GR A, 2.0# DENSITY

J 6-1/4 X 7-1/2 X 2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

K 4 X 7-1/2 X 1/2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

L 6-1/4 X 7-1/2 X 1” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

M 5 X 5-5/8 X 2” THICKNESS 1 A-A-59136, CL 1, GR A, 2.0# DENSITY

FIGURE 1- ITEM AND CUSHIONING PLACEMENT

NOTE: ITEM A NOT SHOWN. PLACE ONE PIECE OF ITEM A IN THE VERY BOTTOM OF CARTON BEFORE ANY OTHER CUSHIONING AND THE SECOND PIECE OF ITEM A ON THE TOP OF THE CUSHIONED ITEM BEFORE

CLOSING CONTAINER FLAPS.

E

C

D

B

B

E F

G

L

C

H

K

J

F

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved -BK OMB No. 0704-0188 NE

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

422542 (05BU0) EXTINGUISHER,FIRE 19207 AK15686243

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

4210-01-568-6243 10/19/2017 -

FIGURE 2- LAYER TWO OF CUSHIONING

NOTE: TWO PIECES OF ITEM I ARE USED. PLACE ONE ON TOP OF EXTINGUISHER BOTTLE AS SHOWN

ABOVE. PLACE THE SECOND PIECE OF ITEM I UNDER THE EXTINGUISHER BOTTLE.

FIGURE 3 – ITEM (H) CUTOUT

I M

SPECIAL PACKAGING INSTRUCTION