SPI_.pdf
PDF 121 KB Posted
- Attached to
- Manifold Assembly Federal contract opportunity
- Solicitation number
- SPRDL1-18-R-0130
About this file
Special Packaging Instructions (SPI)
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRDL1-18-R-0130_Manifold_Assembly.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12346082 (19207) MANIFOLD ASSEMBLY 19207 AK13153360
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4730-01-315-3360 2-9-2007 E
7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)
1 EA NONE 15.6 0.717 14.5 X 12.2 X 7.0
12. MILITARY PRESERVATION (METHOD) 18.
STEPS
19.
REQ’D
20.
DESCRIPTION
MIL-STD-2073-1D, METHOD 42 SEE NOTES.
13. CLEANING
MIL-STD-2073-1D
14. DRYING
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D AND NOTE K
b. LEVEL B
MIL-STD-2073-1D AND NOTE K
16. MARKING
MIL-STD-129
17. NOTES / DRAWING
A. REFER TO THE BILL OF MATERIALS FOR THE CIRCLED NUMBERS AND REFERENCED ITEM NUMBERS ON
THE ACCOMPANYING PAGES.
B. COVER OPENINGS WITH SPECIFIED CAPS, ITEM 1. IF THE PART IS RECEIVED WITH CAPS, THIS STEP
MAY BE ELIMINATED.
C. APPLY PRESERVATIVE TO ALL BARE FERROUS SURFACES.
D. WRAP P/N: 12346082 WITH WRAP, ITEM 3, AND SECURE WITH TAPE.
E. WRAP P/N: 12346082 WITH CUSHION, ITEM 4, AND SECURE WITH TAPE.
F. PLACE PREPARED PART INTO CONTAINER, ITEM 5, AND CLOSE IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
G. PLACE BAG, ITEM 6, OVER PREPARED PART FROM NOTE F AND CLOSE BY HEAT SEALING.
H. PLACE PADS, ITEM 7A, ITEM 7B, AND ITEM 7C, IN CONTAINER, ITEM 8.
I. PLACE PREPARED PART FROM NOTE G INTO PREPARED CONTAINER, ITEM 8, FROM NOTE H.
J. PLACE CUSHIONING, ITEM 7A, INTO TOP OF PREPARED CONTAINER FROM NOTE E. CLOSE CONTAINER
IN ACCORDANCE WITH ASTM-D1974, METHOD 2B3.
K. LEVEL A: PACKING SHALL BE ACCOMPLISHED USING A CLEATED PLYWOOD BOX, CONFORMING TO
ASTM-D6251, TYPE III, CLASS 1.
LEVEL B: THE UNIT CONTAINER IS AN ACCEPTABLE LEVEL B SHIPPING CONTAINER WHEN SEALED AND
REINFORCED IN ACCORDANCE WITH ASTM-D1974, METHOD 2C OR 2D.
FOR BOTH LEVEL A AND LEVEL B, WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME
DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED. MIL-
HDBK-774 MAY BE USED FOR GUIDANCE.
L. INSPECT THE PRESERVATION, THE UNIT PACK AND THE PACKING IN ACCORDANCE WITH MIL-STD-2073-
1D AND THE APPLICABLE CONTAINER SPECIFICATION.
DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 2 Pages
SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188
-CC
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.
12346082 (19207) MANIFOLD ASSEMBLY 19207 AK13153360
4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION
4730-01-315-3360 2-9-2007 E
BILL OF MATERIALS
ITEM
NUMBER DESCRIPTION SIZE SPECIFICATION DATA QTY.
1 CAPS / PLUGS A/R NAS OR EQUILVALENT A/R
2 PRESERVATIVE - MIL-PRF-32033 A/R
3 WRAP 24 X 16 MIL-PRF-121, TYPE II. 1
4 CUSHIONING 24 X 16 X 1/4 A-A-59135, CLASS 1, GRADE A. 1
5 CONTAINER 9 X 3-3/4 X 11-1/8 ASTM-D5118, TYPE CF, CLASS D,
STYLE OPF, VARIETY SW, GRADE 275.
6 BAG 15 X18 MIL-DTL-117, TYPE I, CLASS E, STYLE
1.
7 CUSHIONING A-A-59136, TYPE I, CLASS 1, GRADE
A.
7A 12-1/8 X 9-5/8 X 1 2 7B 11-3/4 X 6-3/8 X 1 2 7C 12-1/8 X 6-3/8 X 1 2
8 CONTAINER 14-1/4 X 11-7/8 X 6-1/2 ASTM-D5118, TYPE CF, CLASS W,
STYLE RSC, VARIETY SW,
GRADE W5c.
File details come from the government source that posted it.