SPI_AK13185760.pdf

DD FORM 2169, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 3 Pages

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-FO

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12349762-1 (19207) GEAR BOX 19207 AK13185670

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

3010-01-318-5670 4-27-10 C

7. QUP 8. ICQ 9. UNIT PACK WT. (LB) 10. UNIT PACK CU (CU FT) 11. UNIT PACK SIZE (INCHES)

1 EA. NONE 25.8 0.777 11.0 X 8.5 X 14.3

12. MILITARY PRESERVATION (METHOD) 18.

STEPS

19.

REQ’D

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 1-B 1 CLOSURE: NAS847

13. CLEANING 2-C PRESERVATIVE: MIL-PRF-16173, GRADE 4

MIL-STD-2073-1D 3-D 1 WRAP: MIL-PRF-121, TYPE I, SIZE: 21 X 36

14. DRYING 4-E CUSHIONING: ASTM-D 4727, TY. CF, CL. DOM, VAR. DW,

MIL-STD-2073-1D GR. 200

5-F 1 CONTAINER: ASTM-D 5118, TY. CF, CL. DOM, VAR. SW,

15. PACKING GR. 175, ST. RSC, SIZE: 10-1/8 X 7-5/8 X 12-1/2

a. LEVEL A 6-G 1 BAG: MIL-DTL-117, TY. I, CL. E, ST. 1, SIZE: 20 X 24

MIL-STD-2073-1D AND NOTE H 7-F 1 CONTAINER: ASTM-D 5118, TY. CF, CL. WR, GR. W5C,

b. LEVEL B ST. RSC, SIZE: 10-5/8 X 8-1/8 X 13-1/2

MIL-STD-2073-1D AND NOTE H

16. MARKING

MIL-STD-129

17. NOTES / DRAWING

A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1D.

B. CLOSE OPENING WITH PLASTIC CAP OR PLUG OF THE APPROPRIATE SIZE.

C. APPLY PRESERVATIVE TO BARE METALLIC SURFACES.

D. TIGHLY WRAP GEAR BOX AND SECURE USING TAPE.

E. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE ILLUSTRATIONS ON PAGES 2 AND 3.

F. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH ASTM-D 1974, METHOD 2B3.

G. CLOSE BAG BY HEAT SEALING.

H. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2, CONFORMING TO ASTM-D 5168.

CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS

REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS

WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 3 Pages

Form Approved OMB No. 0704-0188

-FO

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12349762-1 (19207) GEAR BOX 19207 AK13185670

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

3010-01-318-5670 4-27-10 C

17. NOTES / DRAWING

1. ALL DIMENSIONS ARE IN INCHES.

2. LAMINATE CUSHIONING PADS TOGETHER USING A GOOD WATERPROOF ADHESIVE.

3. ALTERNATE DIRECTION OF CORRUGATION.

4. S = CREASE LINE.

DD FORM 2169C, JUN 1997 (EG) WCT 9-99 PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 3 Pages

Form Approved OMB No. 0704-0188

-FO

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CODE IDENT 3. SPI NO.

12349762-1 (19207) GEAR BOX 19207 AK13185670

4. NATIONAL STOCK NUMBER 5. DATE OF DRAWING 6. REVISION

3010-01-318-5670 4-27-10 C

17. NOTES / DRAWING