SPI_AK14916919.pdf

1. PART OR DRAWING NO./CAGE/NOMENCLATURE

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

7. QUP

2. CAGE

5. DATE

10. UNIT PACK CU8. ICQ 9. UNIT PACK WT.

3. SPI NO.

6. REVISION

11. UNIT PACK SIZE

12. MILITARY PRESERVATION

13. CLEANING

14. DRYING

15. PACKING

a. LEVEL A

b. LEVEL B

16. MARKING

17. NOTES/DRAWING

MIL-STD-2073-1D (METHOD, SEE BLOCK 17)

MIL-STD-2073-1D

MIL-STD-2073-1D

MIL-STD-2073-1D AND NOTE N

MIL-STD-2073-1D AND NOTE N

MIL-STD-129 AND NOTE M

18. 19. 20.

STEPS REQD DESCRIPTION

57K4387 19207 ACCESSORY KIT 19207 AK14916919

2510-01-491-6919 04/12/2012 A

1 EA. NONE 50.0 5.812 86.5 X 25.8 X 4.5

SEE NOTES FOR PACKAGING DETAILS.

A. PRESERVATION AND PACKING SHALL BE INSPECTED IN ACCORDANCE WITH MIL-STD-2073-1D.

B. KIT CONTENTS: THIS KIT CONTAINS THE FOLLOWING ITEMS SEGREGATED AS SHOWN BELOW:

SEGREGATED

QTY NAME PART NUMBER CAGE PACK NUMBER

1 INSTALLATION INSTRUCTIONS 12480522 19207 1

2 SCREW 160057 24617 2

2 NUT 271169 24617 2

2 WASHER 9417373 24617 2

2 SPACER 12338186-89 19207 3

2 SCREW B1821BH038C175N 80204 3

6 WASHER 2436163 24617 3

4 SCREW MS24667-52Z 96906 4

4 WASHER 120382 24617 4

6 NUT M45913/4-6CG8Z 81349 4

2 LANYARD 12342287 19207 5

2 PIN MS17986C1009 96906 5

1 BRUSHGUARD SUPPORT 12480523-1 19207 6

1 BRUSHGUARD SUPPORT 12480523-2 19207 7

1 BRUSHGUARD 12460550 19207 8

C. PREPARE ONE 12480522 INSTALLATION INSTRUCTIONS IN ACCORDANCE WITH THE STEPS BELOW:

1. BAG: MIL-DTL-117, TYPE I, CLASS B, STYLE 2, SIZE: 7 X 12. FOLD ITEM TO FIT BAG WITH TITLE BLOCK VISIBLE.

AFTER PLACING ITEM IN BAG, CLOSE BAG BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “1”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

LD

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

57K4387 19207 ACCESSORY KIT 19207 AK14916919

2510-01-491-6919 04/12/2012 A

D. PREPARE TWO 160057 SCREWS, TWO 271169 NUTS, AND TWO 9417373 WASHERS IN ACCORDANCE WITH THE STEPS

BELOW:

1. BAG: MIL-DTL-117, TYPE I, CLASS B, SIZE: 3 X 3. AFTER PLACING ITEMS IN BAG, CLOSE BAG BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “2”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

E. PREPARE TWO 12338186-89 SPACERS, TWO B1521BH038C175N SCREWS, AND SIX 2436163 WASHERS IN ACCORDANCE

WITH THE STEPS BELOW:

1. BAG: MIL-DTL-117, TYPE I, CLASS B, SIZE: 3 X 4. AFTER PLACING ITEMS IN BAG, CLOSE BAG BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “3”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

F. PREPARE FOUR MS24667-52Z SCREWS, FOUR 120382 WASHERS, AND SIX M45913/4-6CG8Z NUTS IN ACCORDANCE

WITH THE STEPS BELOW:

1. BAG: MIL-DTL-117, TYPE I, CLASS B, SIZE: 4 X 6. AFTER PLACING ITEMS IN BAG, CLOSE BAG BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “4”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

G. PREPARE TWO 12342287 LANYARDS AND TWO MS17986C1009 PINS IN ACCORDANCE WITH THE STEPS BELOW:

1. BAG: MIL-DTL-117, TYPE I, CLASS B, SIZE: 5 X 7. AFTER PLACING ITEMS IN BAG, CLOSE BAG BY HEAT SEALING.

2. IDENTIFICATION: IDENTIFY THE BAG WITH SEGREGATED PACK NUMBER “5”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 31.

H. PREPARE ONE 12480523-1 SUPPORT IN ACCORDANCE WITH THE STEPS BELOW:

1. WRAP: MIL-P-17667, TYPE II, CLASS 1, SIZE: 10 X 18. SECURE WRAP USING TAPE.

2. IDENTIFICATION: IDENTIFY THE WRAP WITH SEGREGATED PACK NUMBER “6”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

I. PREPARE ONE 12480523-2 SUPPORT IN ACCORDANCE WITH THE STEPS BELOW:

1. WRAP: MIL-P-17667, TYPE II, CLASS 1, SIZE: 10 X 18. SECURE WRAP USING TAPE.

2. IDENTIFICATION: IDENTIFY THE WRAP WITH SEGREGATED PACK NUMBER “7”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

J. CONSOLIDATE ITEMS FROM NOTES C THROUGH I IN ACCORDANCE WITH THE STEPS BELOW:

1. CONTAINER: ASTM-D 5118, TYPE CF, CLASS WR, GRADE W5c, STYLE FOL, SIZE 11 X 2-1/2 X 5.

2. CLOSURE: SHALL BE IN ACCORDANCE WITH ASTM-D 1974, METHOD 1D.

3. INSPECTION: INSPECT CONSOLIDATION PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

4. MARK CONSOLIDATION PACK WITH NOTE: “THIS BOX CONTAINS SEGREGATED PACKS 1 THROUGH 7.”

5. SECURE CONTAINER TO THE WRAPPED AREA OF ITEM IN NOTE “K” USING TAPE.

K. PREPARE ONE 12460550 BRUSHGUARD ASSEMBLY IN ACCORDANCE WITH THE STEPS BELOW:

1. WRAP: MIL-P-17667, TYPE II, CLASS 1, SIZE: 6 X 11. PLACE WRAP AROUND TOP CENTER OF TUBE. SECURE WRAP

USING TAPE.

2. IDENTIFICATION: IDENTIFY THE ITEM WITH SEGREGATED PACK NUMBER “8”.

3. INSPECTION: INSPECT SEGREGATED PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

L. CONSOLIDATE ITEMS FROM NOTES J AND K IN ACCORDANCE WITH THE STEPS BELOW:

1. CONTAINER: ASTM-D 5118, TYPE CF, CLASS WR, GRADE V3c, STYLE FOL, SIZE 25-1/2 X 4-1/4 X 85-3/4.

2. CLOSURE: SHALL BE IN ACCORDANCE WITH ASTM-D 1974, METHOD 1D.

3. INSPECTION: INSPECT UNIT PACK IN ACCORDANCE WITH CRITERIA FOR METHOD 10.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

LD

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

57K4387 19207 ACCESSORY KIT 19207 AK14916919

2510-01-491-6919 04/12/2012 A

M. PROVIDE A PACKING LIST WITH THE UNIT PACK IN ACCORDANCE WITH MIL-STD-129 INDENTIFYING THE ITEMS WITHIN THE KIT. ON THE PACKING LIST, IDENTIFY THE ITEMS WITHIN EACH SEGREGATED PACK TOGETHER WITH THEIR

SEGREGATED PACK NUMBER.

N. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT,

CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2,

CONFORMING TO ASTM-D 5168. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

FD

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

LD

casey.r.johnson2 Typewritten Text casey.r.johnson2 Typewritten Text WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR

PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

casey.r.johnson2 Typewritten Text casey.r.johnson2 Typewritten Text casey.r.johnson2 Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text

Deborah.R.King Typewritten Text Page 3 of 3 Pages