SPI_AK11949870.pdf

1BSPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-OK

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

2-198-1-00075 (12361) DRIVE ASSEMBLY TURN 19207 AK11949870

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-194-9870 6-27-2018 A

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EA. NONE 180.0 3.002 23.0 X 12.6 X 17.9

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION MIL-STD-2073-1E METHOD 20

13. CLEANING 1B A/R INTERNAL PRESERVATIVE

MIL-STD-2073-1E

14. DRYING 2C A/R CAP/PLUG: NAS 847

MIL-STD-2073-1E

15. PACKING

3D A/R EXTERNAL PRESERVATIVE: MIL-PRF-16173, GRADE 4

a. LEVEL A

4E A/R BARRIER: MIL-PRF-121, TYPE I, SIZE: AS REQUIRED

MIL-STD-2073-1E AND NOTE H

b. LEVEL B

5F 7 BLOCKING: ASTM D6199, GROUP I OR II

NOT APPLICABLE

16. MARKING 6G 1 CONTAINER: ASTM D6880, CLASS 2, STYLE 2,

MIL-STD-129 TREATMENT A, SIZE: 20 X 11-1/8 X 13-3/8

17. NOTES/DRAWING

DD FORM 2169, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 2 Pages

A. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH (IAW) MIL-STD-2073-1E. INSPECT

THE PACKING IAW MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.

B. PRESERVE INTERNALLY WITH MANUFACTURER’S RECOMMENDED LUBRICANT.

C. SEAL OPENINGS TO THE INTERIOR WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.

D. APPLY TO ALL EXTERIOR BARE FERROUS SURFACES.

E. APPLY BARRIER MATERIAL BETWEEN POINTS OF CONTACT OF ITEM WITH BLOCKING AND

CONTAINER.

F. SEE PAGE 2 FOR BLOCKING SIZES AND ORIENTATION.

G. CLOSE CONTAINER IN ACCORDANCE WITH ASTM D6880.

H. THE UNIT CONTAINER IS THE SHIPPING CONTAINER.

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)

Form Approved OMB No. 0704-0188

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number

PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE CODE) NOMENCLATURE 2. CAGE 3. SPI NO.

2-198-1-00075 (12361) DRIVE ASSEMBLY

19207 AK11949870

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2590-01-194-9870 6-27-2018 A

DD FORM 2169C, JUN 1997 PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 2 Pages