SPI_12365133_remote_terminal.pdf

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

Public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services, Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington, Va 22202-4302, and to the Office of Management and Budget, Paperwork Reduction Project(0704-0188). Washington, DC 20503. Please do not return your form to either of these addresses.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12365133 (06085) REMOTE TERMINAL 19207 AK14939102

4. NATIONAL STOCK NO. 5. DATE OF DRAWING 6. REVISION

5940-01-493-9102 1-14-2004 -

7. QUP 8. ICQ 9. UNIT PACK WT.(LB) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 13.6 0.716 14.0 x 13.0 x 6.8

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1D, METHOD 42 & NOTE A 1-C CAPS/PLUGS: NAS 847

13. CLEANING

MIL-STD-2073-1D & NOTE B 2-D 1 CUSHIONING: A-A-59135, CL 2, GR A, SIZE: 60 x 17 x 1/4

14. DRYING

MIL-STD-2073-1D & NOTE B 3-E 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CL DOM,

VAR SW, GR 200, SIZE: 13 X 12 X 5-1/4

15. PACKING

a. LEVEL A 4 1 BAG: MIL-PRF-117, TY I, CL E, ST 1, SIZE: 20 x 22

MIL-STD-2073-1D & NOTE F

b. LEVEL B 5-E 1 CONTAINER: ASTM D5118, ST RSC, TY CF, CL WR, MIL-STD-2073-1D & NOTE F VAR SW, GR W5c, SIZE: 13-1/2 X 12-1/2 X 6

16. MARKING

MIL-STD-129 AND NOTE G

17. NOTES/DRAWINGS

A. THE UNIT PACK SHALL PROVIDE PHYSICAL AND MECHANICAL PROTECTION TOGETHER WITH A

WATERVAPORPROOF BAG.

B. CLEAN AND DRY ITEM BY ANY SUITABLE PROCESS BEFORE APPLICATION OF PACKAGING MATERIALS.

C. SEAL ELECTRICAL CONNECTORS WITH CAPS/PLUGS OF THE APPROPRIATE SIZE.

D. APPLY A DOUBLE LAYER OF CUSHIONING. SECURE WITH TAPE.

E. CONTAINER CLOSURE SHALL BE IN ACCORDANCE WITH THE APPLICABLE METHOD OF ASTM D1974.

F. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES, OVERSEAS TYPE, CONFORMING TO ASTM D6251.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-

RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD

BOXES, CLASS 2, CONFORMING TO ASTM D5168 OR PALLET BASE CONTAINERS, TYPE III,

CONFORMING TO MIL-B-43666.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-HDBK-774.

G. IN ADDITION TO MIL-STD-129 MARKINGS, THE UNIT CONTAINER SHALL BE MARKED ON THE TOP AND ONE

SIDE WITH MINIMUM 1/2 INCH HIGH BLACK LETTERS "REUSABLE CONTAINER AND CUSHIONING, DO NOT

DESTROY".

DD Form 2169, JUN 1997 Previous editions are obsolete. Page 1 of 1 Pages

SPECIAL PACKAGING INSTRUCTION