SPI_AK15071419.pdf

1. PART OR DRAWING NO./CAGE/NOMENCLATURE

SPECIAL PACKAGING INSTRUCTION Form Approved OMB No. 0704-0188 RJ

4. NATIONAL STOCK NO.

7. QUP

2. CAGE

5. DATE

10. UNIT PACK CU8. ICQ 9. UNIT PACK WT.

3. SPI NO.

6. REVISION

11. UNIT PACK SIZE

12. MILITARY PRESERVATION

13. CLEANING

14. DRYING

15. PACKING

a. LEVEL A

b. LEVEL B

16. MARKING

17. NOTES/DRAWING

MIL-STD-2073-1D, METHOD 20

MIL-STD-2073-1D

MIL-STD-2073-1D

MIL-STD-2073-1D AND NOTE G

MIL-STD-2073-1D AND NOTE G

MIL-STD-129

18. 19. 20.

STEPS REQD DESCRIPTION35

352-2109 (11083) PUMP, COOLING SYSTEM, ENGINE 11083 AK15071419

2930-01-507-1419 11-18-14

1 EA. NONE 21.0 0.463 10.1 X 8.9 X 8.9

1-B INTERNAL PRESERVATIVE: OPERATIONAL FLUID.

2-C 3 CLOSURE: NAS834.

3-D PRESERVATIVE: MIL-PRF-16173, GR. 4.

4-E 7 CUSHIONING: ASTM-D 4727, TYPE CF, CL. WR, VARIETY TW.

5-F 1 CONTAINER: ASTM-D 5118, TYPE CF, CL. WR, GR. W5c, STYLE RSC, SIZE: 9-7/8 X 8-5/8 X 8-3/8.

A. PRESERVATION AND PACKING SHALL BE IN ACCORDANCE WITH MIL-STD-2073-1D.

B. SLUSH OR FLUSH INTERNALLY AND THOROUGHLY DRAIN EXCESS.

C. SEAL ALL PORTS WITH PLUGS OR CAPS OF THE APPROPRIATE SIZE.

D. APPLY PRESERVATIVE TO ALL EXTERIOR BARE METALLIC SURFACES.

E. FOR FABRICATION AND PLACEMENT OF CUSHIONING SEE ILLUSTRATIONS ON SHEETS 2 AND 3.

F. CLOSURE SHALL BE IN ACCORDANCE WITH ASTM- D 1974, METHOD 2B3.

G. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING WOOD-CLEATED PANELBOARD SHIPPING BOXES, CONFORMING TO ASTM-D 6251, TYPE III, CLASS 2 OR NAILED WOOD BOXES CONFORMING TO ASTM-D 6880, CLASS 2.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING FIBERBOARD BOXES, WEATHER RESISTANT, CONFORMING TO ASTM-D 5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CLASS 2, CONFORMING TO ASTM-D 5168.

CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IAW SPECIFIC, APPLICABLE METHODS OF ASTM-D 1974, OR AS

REFERENCED IN THE CONTAINER SPECIFICATION.

GUIDANCE ON PALLETIZED UNIT LOADS FOR MILITARY/GOVERNMENT SHIPPERS IS SHOWN IN MIL-STD-147.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 1 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

–DT

NE

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

352-2109 (11083) PUMP, COOLING SYSTEM, ENGINE 11083 AK15071419

2930-01-507-1419 11-18-14

NOTES:

1. ALL DIMENSIONS ARE IN INCHES.

2. FABRICATE CUSHIONING PAD “A”, ONE REQUIRED, AS SHOWN BELOW. POSITION AS ILLUSTRATED ON

SHEET 3.

3. FABRICATE CUSHIONING PAD “B”, ONE REQUIRED, SIZE: 9-3/4 X 8-1/2. POSITION AS ILLUSTRATED ON

SHEET 3.

4. FABRICATE CUSHIONING PAD “C”, ONE REQUIRED, AS SHOWN BELOW. POSITION AS ILLUSTRATED ON

SHEET 3.

5. FABRICATE CUSHIONING PAD “D”, ONE REQUIRED, AS SHOWN BELOW. POSITION AS ILLUSTRATED ON

SHEET 3.

6. FABRICATE CUSHIONING PAD “E”, TWO REQUIRED, SIZE: 8-1/2 X 7-1/8. POSITION AS ILLUSTRATED ON

SHEET 3.

7. FABRICATE CUSHIONING PAD “F”, ONE REQUIRED, AS SHOWN ON SHEET 3. POSITION AS ILLUSTRATED

ON SHEET 3.

8. USING A GOOD WATERPROOF ADHESIVE, SECURE CUSHIONING PADS “A” AND “B”, “C” AND “E”, AND

“D” AND “E”TOGETHER AS ILLUSTRATED ON SHEET 3.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 2 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

-DT

RJ

SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved OMB No. 0704-0188

4. NATIONAL STOCK NO.

2. CAGE

5. DATE

3. SPI NO.

6. REVISION

353-2109 (11083) PUMP, COOLING SYSTEM, ENGINE 11083 AK15071419

2930-01-507-1419 11-18-14

NOTES:

1. ALL DIMENSIONS ARE IN INCHES.

2. ✳✳ = SCORE LINE.

DD FORM 2169C, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE. Page 3 of 3 Pages Designed using Perform Pro. WHS/DIOR, Jun 97

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THIS ADDRESS.

-DT

RJ