SPI_AK16171588.pdf
PDF 340 KB Posted
- Attached to
- Pump, Centrifugal Federal contract opportunity
- Solicitation number
- SPRDL1-18-Q-0387
About this file
Special Packaging Instruction (SPI) AK16171588
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Solicitation_No._SPRDL1-18-Q-0387.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 8 Designed using Perform Pro, WHS/DIOR, Jun 97
SPECIAL PACKAGING INSTRUCTION
Form Approved OMB No. 0704-0188
-BK
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
.D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-617-1588 8/2/2013
7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)
1 EACH NONE SEE PAGE 8 SEE PAGE 8 SEE PAGE 8
12. MILITARY PRESERVATION 18.
STEPS
19.
REQD
20.
DESCRIPTION
MIL-STD-2073-1D, SEE NOTES C – EE
13. CLEANING 1 A/R ITEM CONTENTS: SEE NOTE B
MIL-STD-2073-1D 2 A/R ITEM PREPARATION AND CONSOLIDATION:
14. DRYING SEE NOTES C - EE
MIL-STD-2073-1D
15. PACKING
a. LEVEL A
MIL-STD-2073-1D & NOTE EE
b. LEVEL B
NONE
16. MARKING
MIL-STD-129
17. NOTES/DRAWING
A. INSPECT THE PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER SPECIFICATION.
B. PART NUMBER D401324, PUMP CENTRIFUGAL, QUANTITY: 1, CONSISTS OF THE FOLLOWING ITEMS:
PART NUMBER DESCRIPTION QTY
D313504 ELECTRICAL SERVICE INTERFACE 1
HW018C-163 BOLT, MACHINE 40
HW048A-11 NUT, HEX 40
D313495 SEAL, PIPE THREAD 1 QUART
D313254 STRAP, CABLE TIEDOWN 3 BAGS
D313296 THREADLOCK COMPOUND 2
D313273 PLUG 1
D313275 CLAMP, WIRE ROPE 10
D313519 CONDUIT, FLEXIBLE 1 ROLL
D313277 VALVE, GATE 1
D313271 VALVE, CHECK 1
D313505 CONNECTOR 1 SET
D313484 SEAL, WELL 1
D313291 NIPPLE, 2” X 4” 2
D313292 NIPPLE 2” X 6” 2
D313392 NIPPLE 2” X 12” 2
A
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-617-1588 8/2/2013
17. NOTES/DRAWING
PART NUMBER DESCRIPTION QTY
D313293 ELBOW, 90 DEG X 2” 1
D313301 SPLICE KIT 1
D313269 3” X 2.0” THREADED BUSHING 1
D313274 ROPE, WIRE 600 FEET
D313515 PUMPING ELEMENT 1
D313516 MOTOR 1
D313270 DROP PIPE 29
D313300 CABLE 1000 FEET
C. PREPARE P/N D313511, ELECTRICAL SERVICE INTERFACE, QTY: 1 AS FOLLOWS:
1. CONTAINER: CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 29 X 17 X 14, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR
PRESERVATION, METHOD 10.
D. PREPARE P/N HW018C-163, BOLT, MACHINE, QTY: 40 AS FOLLOWS:
1. CONTAINER: CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 6 X 6 X 6-1/2, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR
PRESERVATION, METHOD 10.
E. PREPARE P/N HW048A-11, NUT, HEX, QTY: 40 AS FOLLOWS:
1. CONTAINER: CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 6 X 6 X 6-1/2, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR
PRESERVATION, METHOD 10.
F. PREPARE P/N D313495, SEAL, PIPE THREAD, QTY: 1 QUART AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 18 X 8 X 6, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR
PRESERVATION, METHOD 10.
G. PREPARE P/N D313254, STRAP, CABLE TIEDOWN, QTY: 3 BAGS AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 18 X 8 X 6, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR
PRESERVATION, METHOD 10.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-617-1588 8/2/2013
17. NOTES/DRAWING
H. PREPARE P/N D313296, THREADLOCK COMPOUND, QTY: 2 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 18 X 8 X 6, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
I. PREPARE P/N D313275, CLAMP, WIRE ROPE, QTY: 10 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 6 X 6 X 6-1/2, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
J. PREPARE P/N D313273, PLUG, QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
K. PREPARE P/N D313277, VALVE, GATE, QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
L. PREPARE P/N D313271, VALVE, CHECK, QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
M. PREPARE P/N D313291, NIPPLE, 2” X 4”, QTY: 2 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
N. PREPARE P/N D313292, NIPPLE, 2” X 6”, QTY: 2 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
O. PREPARE P/N D313392, NIPPLE, 2” X 12”, QTY: 2 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
P. PREPARE P/N D313293, ELBOW, 90 DEG X 2” QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
Q. PREPARE P/N D313301, SPLICE KIT, QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
R. PREPARE P/N D313269, 3” X 2.0” THREADED BUSHING, QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
S. PREPARE P/N D313274, ROPE, WIRE, QTY: 600 FEET AS FOLLOWS:
1. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
2. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
T. PREPARE P/N D313505, CONNECTOR, QTY: 1 SET AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 10 X 6 X 6-1/2, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
U. PREPARE P/N D313484, SEAL, WELL QTY: 1 AS FOLLOWS:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 9 X 9 X 3, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-617-1588 8/2/2013
17. NOTES/DRAWING
V. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES F - H IN ACCORDANCE WITH THE FOLLOWING:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 18 X 8 X 6, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY CONTAINER WITH ALL PART NUMBERS, DESCRIPTIONS AND
QUANTITES OF ITEMS LOCATED INSIDE OF CONTAINER.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
W. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES I – T IN ACCORDANCE WITH THE FOLLOWING:
1. CONTAINER: ASTM-D5118, TY CF, ST RSC, CL D, GR 200, VR SW, SIZE: 13 X 10 X 10, CLOSE
CONTAINER IN ACCORDANCE WITH ASTM-D1974, METHOD 2B6.
2. IDENTIFICATION: IDENTIFY CONTAINER WITH ALL PART NUMBERS, DESCRIPTIONS AND
QUANTITES OF ITEMS LOCATED INSIDE OF CONTAINER.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
X. PREPARE P/N D313516, MOTOR, QTY: 1 AS FOLLOWS:
1. ITEM TO REMAIN IN COMMERCIAL (HEAT TREATED) CONTAINER: ASTM-D6880, CL 2, ST 2, SIZE:
42-1/2 X 9 X 11. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6880.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
Y. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTES C – E AND V - X IN ACCORDANCE WITH THE
FOLLOWING:
1. CONTAINER: ASTM-D6251, TY III, CL 2, ST A, SIZE: 46 X 25 X 26, SEE FIGURE 1 AND 2 FOR ITEM
LOCATION, CLOSE CONTAINER IN ACCORDANCE WITH ASTM-D6251.
2. IDENTIFICATION: IDENTIFY CONTAINER WITH ALL PART NUMBERS, DESCRIPTIONS AND
QUANTITES OF ITEMS LOCATED INSIDE OF CONTAINER.
3. LABEL: LABEL CONTAINER “1 OF 5”.
4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
Z. PREPARE P/N D313515, PUMPING ELEMENT, QTY: 1 AS FOLLOWS:
1. ITEM TO REMAIN IN COMMERCIAL (HEAT TREATED) CONTAINER: 4728, TY CF, ST TUBE, CL WR, V11c, VR SW, SIZE: 47-1/2 X 6-1/2 X 6-1/2. CLOSE TUBE USING BLOCKING ON TOP AND BOTTOM.
SECURE WITH STAPLES.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
AA. PREPARE P/N D313270, DROP PIPE, QTY: 29 AS FOLLOWS:
1. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
2. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 6 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet) Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
4320-01-617-1588 8/2/2013
17. NOTES/DRAWING
BB. CONSOLIDATION: CONSOLIDATE ITEMS FROM NOTE Z - AA IN ACCORDANCE WITH THE FOLLOWING:
1. CONTAINER: ASTM-D7478, TY II, CL 2, ST A,, SIZE: 256-1/4 X 34-1/2 X 29-1/4, PLACE 29 DROP
PIPES INTO CONTAINER, SEE FIGURE 3. CLOSE CONTAINER IN ACCORDANCE WITH ASTM-
D7478.
2. IDENTIFICATION: IDENTIFY CONTAINER WITH ALL PART NUMBERS, DESCRIPTIONS AND
QUANTITES OF ITEMS LOCATED INSIDE OF CONTAINER.
3. LABEL: LABEL CONTAINER “2 OF 5”.
4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
CC. PREPARE P/N D313300, CABLE, QTY: 1000 FEET AS FOLLOWS:
1. PALLET: PLACE ITEMS ON TWO (2) 40 X 48 HEAT TREATED PALLETS, SECURE ITEMS WITH
METAL BANDING.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. LABEL: LABEL EACH PALLET WITH A CORRESPONDING NUMBER: “3 OF 5 AND 4 OF 5.”
4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, METHOD 10.
DD. PREPARE P/N D313519, CONDUIT, FLEXIBLE, QTY: 1 ROLL AS FOLLOWS:
1. PALLET: PLACE ITEM ON 32 X 32 X 20 HEAT TREATED PALLET, SECURE ITEMS WITH METAL
BANDING.
2. IDENTIFICATION: IDENTIFY THE ITEM WITH THE PART NUMBER, DESCRIPTION, AND QUANTITY.
3. LABEL: LABEL PALLET “5 OF 5.”
4. INSPECTION: INSPECT IN ACCORDANCE WITH MIL-STD-2073-1D, CRITERIA FOR PRESERVATION, EE. THE UNIT CONTAINERS AND PALLETS ARE THE SHIPPING METHODS, NOTES X, & BB – EE.
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 7 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collect ion of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
ORIENTATION OF ITEMS IN CRATE: NOTE Y
FIGURE 1
ORIENTATION OF ITEMS IN CRATE: NOTE Y
FIGURE 2
BOLT, MACHINE
NUT, HEX
CLAMP, WIRE ROPE
ELECTRICAL SERVICE
INTERFACE
CONSOLIDATED
CONTAINER –
NOTE V
SEAL, WELL
CONSOLIDATED
CONTAINER –
NOTE W
MOTOR
ROPE, WIRE
DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 8 of 8
SPECIAL PACKAGING INSTRUCTION (Continuation Sheet)
Form Approved -BK OMB No. 0704-0188
The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.
1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.
. D401324 (4N8X6) PUMP,CENTRIFUGAL 19207 AK16171588
4. NATIONAL STOCK NO. 5. DATE 6. REVISION
ORIENTATION OF ITEMS IN CRATE: NOTE BB
FIGURE 3
PACKAGE WEIGHTS AND DIMENSIONS
PACKAGE UNIT PACK WT. (LB.) UNIT PACK CU. (CU. FT.) UNIT PACK SIZE (INCHES)
1 500.0 17.303 46.0 X 25.0 X 26.0
2 3550.0 220.000 264.0 X 36.0 X 40.0
3 1770.0 220.000 48.0 X 40.0 X 40.5
4 1400.0 45.000 48.0 X 40.0 X 40.5
5 155.0 11.852 32.0 X 32.0 X 20.0
DROP PIPE
PUMPING
ELEMENT
File details come from the government source that posted it.