SPI_EH8E1053EH.PDF

SPECIAL PACKAGING INSTRUCTION

Form Approved OMB No. 0704-0188

-BM

JS

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12577929 (19207) ADJUSTER, SLACK, TRACK 19207 AK16470927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-647-0927 November 30, 2016

7. QUP 8. ICQ 9. UNIT PACK WT (LB.) 10. UNIT PACK CU (CU. FT.) 11. UNIT PACK SIZE (INCHES)

1 EACH NONE 20.5

0.369 21.5 X 5.7 X 5.2

12. MILITARY PRESERVATION 18.

STEPS

19.

REQD

20.

DESCRIPTION

MIL-STD-2073-1, METHOD 20

1-B CUSHIONING AND BLOCKING: SEE NOTES

MIL-STD-2073-1

14. DRYING 2-C BARRIER MATERIAL: MIL-PRF-121, TY II, SIZE:14 X 6

MIL-STD-2073-1 3-C PPP-C-1797, TYPE I, SIZE: 14 X 6

15. PACKING

a. LEVEL A 4-D 2 CONTAINER: ASTM D5118, ST FOL, TY CF, CL WR MIL-STD-2073-1 & NOTE E VAR SW, GR W5c, SIZE: 5-3/8 X 4-7/8 X 20-1/4

b. LEVEL B 5 CONTAINER CLOSURE:ASTM-D1974, METHOD 4B2

MIL-STD-2073-1 & NOTE E

16. MARKING

MIL-STD-129

17. NOTES/DRAWING

A. QUALITY ASSURANCE PROVISIONS:

1. INSPECT PRESERVATION AND UNIT PACK IN ACCORDANCE WITH MIL-STD-2073-1.

2. INSPECT THE PACKING IN ACCORDANCE WITH MIL-STD-1186 AND THE APPLICABLE CONTAINER

SPECIFICATION.

B. FABRICATE ITEMS “A”, “B” AND “C” FROM CHART ON PAGE 2 AND AS SHOWN IN SKETCHES ON PAGE 3

AND PAGE 4.

FABRICATE ASSEMBY “1” USING WATERPROOF GLUE AS SHOWN IN SKETCH ON PAGE 3.

ASSEMBLE THE END CAPS (2 EACH) AS SHOWN ON PAGE 4 AND PAGE 5.

C. SECURE BARRIER MATERIAL TO EACH END OF THE SHAFT WITH TAPE.

SECURE CUSHIONING WRAP TO EACH END WITH TAPE.

D. ASSEMBLE PACKAGE AS SHOWN ON PAGE 5.

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 1 of 5 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12577929 (19207) ADJUSTER, SLACK, TRACK 19207 AK16470927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

2530-01-647-0927 November 30, 2016

E. PACKING:

LEVEL A PACKING SHALL BE ACCOMPLISHED USING CLEATED-PLYWOOD BOXES, OVERSEAS TYPE, CONFORMING TO ASTM D6251.

LEVEL B PACKING SHALL BE ACCOMPLISHED USING EITHER FIBERBOARD BOXES, WEATHER-

RESISTANT CLASS, CONFORMING TO ASTM D5118 OR TRIPLEWALL, CORRUGATED FIBERBOARD BOXES, CONFORMING TO CLASS CGWR OF ASTM D5168 OR PALLET BASE CONTAINERS, TYPE III, CONFORMING TO MIL-B-43666. CLOSURE, SEALING, AND REINFORCEMENT SHALL BE IN ACCORDANCE WITH SPECIFIC, APPLICABLE METHODS OF ASTM D1974, OR AS REFERENCED IN THE CONTAINER SPECIFICATION.

WHEN THE TOTAL QUANTITY TO BE SHIPPED TO THE SAME DESTINATION EXCEEDS 125 POUNDS, EXTERIOR PACKS WITHOUT SKIDS SHALL BE PALLETIZED IN ACCORDANCE WITH MIL-STD-147.

BLOCK

NUMBER

DESCRIPTION

QTY

COMMENTS

A ASTM D 5168, TY CF, CLASS CGWR,

GRADE 1100 AND APPLICABLE

REQUIREMENTS OF ASTMD4727,

SIZE: 4-1/4 X 4

FABRICATE AS SHOWN IN SKETCH ON

B ASTM D 5168, TY CF, CLASS CGWR,

SIZE: 12-5/16 X 4

C ASTM D 5168, TY CF, CLASS CGWR,

SIZE: 14-9/16 X 4-3/4

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 2 of 5 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12577929 (19207) ADJUSTER, SLACK, TRACK 19207 AK16470927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 3 of 5 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12577929 (19207) ADJUSTER, SLACK, TRACK 19207 AK16470927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 4 of 5 Pages

The public reporting burden for this collection of information is estimated to average 30 days per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Department of Defense, Executive Services and Communications Directorate (0704-0188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR COMPLETED FORM TO THE ABOVE ORGANIZATION.

1. PART OR DRAWING NO. (CAGE) NOMENCLATURE 2. CAGE 3. SPI NO.

12577929 (19207) ADJUSTER, SLACK, TRACK 19207 AK16470927

4. NATIONAL STOCK NO. 5. DATE 6. REVISION

DD FORM 2169, JUN 1997 (EG) PREVIOUS EDITIONS ARE OBSOLETE Page 5 of 5 Pages